{"title":"Normal setting floor leveling compound","description":"\u003cp\u003eBroken tiles, creaking parquet, and rippling vinyl are most often caused not by the quality of the material but by an uneven substrate. Even a millimeter difference in level is enough for the flexible adhesive layer to distribute the load unevenly, causing it to fail in the weakest spots over time. Normal-setting leveling compound solves this problem.\u003c\/p\u003e\n\u003ch3\u003eWhat is normal-setting leveling compound?\u003c\/h3\u003e\n\u003cp\u003eNormal-setting leveling compound is a cement-based, self-leveling or trowelable substrate preparation material used to create an even base for indoor and covered outdoor floors. Its role is not structural—it does not bear loads or replace screed—but serves as the final layer beneath the flooring that ensures geometric perfection. It can be used under tiles, parquet, vinyl, carpet, and flexible coverings alike.\u003c\/p\u003e\n\u003ch3\u003eWhat layer thickness can it be applied in?\u003c\/h3\u003e\n\u003cp\u003eNormal-setting leveling compound can be applied in layers from 3 to 50 mm thick. This range covers the vast majority of cases: from repairing small local depressions and level differences to smoothing larger uneven areas. For thicknesses above 50 mm, screed or special thick-layer leveling compounds must be used.\u003c\/p\u003e\n\u003ch3\u003eHow long before the leveling compound can be covered?\u003c\/h3\u003e\n\u003cp\u003eNormal-setting leveling compound is generally ready for covering after 24 hours—this time may vary depending on temperature and humidity. Full load-bearing capacity develops more slowly: light foot traffic is allowed sooner, but the manufacturer's specified waiting time must be observed before installing the final flooring.\u003c\/p\u003e\n\u003cp\u003eIn the case of underfloor heating, the heating circuit must be turned off before applying the leveling compound, and after application, a 28-day waiting period is required before the first heating—rushing this step can cause cracking.\u003c\/p\u003e\n\u003ch3\u003eWhat should be considered when using normal-setting leveling compound?\u003c\/h3\u003e\n\u003cp\u003eProper substrate preparation—cleaning, removing dust and loose parts, and applying primer if necessary—is essential for the adhesion of the leveling compound. Without primer, the compound will draw the water needed for setting from the substrate, leading to hairline cracks or delamination. For calcium sulfate screeds, a special compatible leveling compound must be used.\u003c\/p\u003e\n\u003ch3\u003eNormal-setting vs. fast-setting leveling compound\u003c\/h3\u003e\n\u003cp\u003eIf the timeframe is tight—such as in interior renovations, commercial spaces, or hotels—fast-setting leveling compound can be covered after 2–4 hours. Normal-setting materials have longer setting times but are generally less expensive and easier to work with. The choice depends on balancing the schedule and project budget.\u003c\/p\u003e\n\u003cp\u003eBrowse our range of normal-setting leveling compounds or request advice for preparing your floor substrate.\u003c\/p\u003e","products":[{"product_id":"kerakoll-keralevel-eco","title":"Kerakoll Keralevel Eco indoor and outdoor substrate leveling compound (1–10 mm)","description":"\u003cp\u003eSelf-leveling compound? Runs on sloped surfaces. Fast-setting? Hardens during work. Thixotropic leveling compound — stays where applied, workable for 4 hours. CT-C25-F6 strength. This is Kerakoll Keralevel Eco.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThixotropic consistency: does not run — stays where applied, even on sloped surfaces\u003c\/li\u003e\n\u003cli\u003eWorkable for 4 hours: large surface with a single mix, no remixing needed\u003c\/li\u003e\n\u003cli\u003eFor both interior and exterior use: no need to buy a separate product\u003c\/li\u003e\n\u003cli\u003eAlso suitable for gypsum-based substrates: with \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e primer — gypsum plaster, anhydrite screed\u003c\/li\u003e\n\u003cli\u003eUnder ceramic, parquet, flexible coverings: smooth, even substrate for adhesive\u003c\/li\u003e\n\u003cli\u003eWalkable after 24 hours: tiling with ceramic after 24 hours, parquet after 3-5 days\u003c\/li\u003e\n\u003cli\u003eCT-C25-F6 strength: ≥25 N\/mm² compressive, ≥6 N\/mm² flexural strength\u003c\/li\u003e\n\u003cli\u003eGreenBuilding Rating 2: certified for green constructions, ≥60% regional mineral content\u003c\/li\u003e\n\u003cli\u003e1-10 mm layer thickness: 1 bag (25 kg) ≈ 3 m² at 5 mm thickness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing water\u003c\/th\u003e\n\u003ctd\u003e≈6.5 l \/ 25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003e≥4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003eFrom +5°C to +35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003e1-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWalkable\u003c\/th\u003e\n\u003ctd\u003e≈24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTiling ceramic, porcelain stoneware\u003c\/th\u003e\n\u003ctd\u003e≈24 hours (+20°C, 65% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTiling parquet, flexible\u003c\/th\u003e\n\u003ctd\u003e≈3-5 days (+20°C, 65% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eBag 25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 1.5 kg\/m\u003csup\u003e2\u003c\/sup\u003e\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat is it suitable for?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Cement plaster, cement-lime mortar, cement panels, cellular concrete panels, mineral screeds made with Keracem Eco Pronto\/Prontoplus\/Rekord Eco Pronto binders, cement screeds, cement-based adhesive residues, concrete, reinforced concrete. Gypsum plaster and anhydrite screed: with \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e primer (after sanding for anhydrite).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverings:\u003c\/strong\u003e Ceramic, porcelain stoneware, natural stones, modified materials, marbles, parquet, textile floors, rubber, PVC, linoleum, varnishes, paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpaces (floor only):\u003c\/strong\u003e Outdoor and indoor, residential\/commercial\/industrial floor coverings, underfloor heating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Flexible or heat-expanding substrates, drywall, wet and continuously damp-prone substrates, gypsum-based plasters and anhydrite screeds without \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor leveling thicker than 10 mm\u003c\/strong\u003e use \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-lr\"\u003eKeralevel Eco LR\u003c\/a\u003e, suitable up to 25 mm in a single layer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor vertical or inclined surfaces (wall, stairs)\u003c\/strong\u003e use \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-lr\"\u003eKeralevel Eco LR\u003c\/a\u003e — thixotropic formula and fast setting time, suitable for vertical application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor premium load-bearing, fast projects, or flexible floor coverings (PVC, rubber, linoleum)\u003c\/strong\u003e use \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-ultra\"\u003eKeralevel Eco Ultra\u003c\/a\u003e — C30-F7 strength (certified on ships), ultra-smooth surface, tileable in 2-6 hours.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-leveling or thixotropic leveling?\u003c\/strong\u003e \u003cbr\u003eSelf-leveling is faster on horizontal surfaces but runs off on slopes. Thixotropic stops where you apply it — better choice for sloped surfaces, stairs, repairs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much is needed per square meter?\u003c\/strong\u003e \u003cbr\u003e≈1.5 kg\/m²\/mm. 1 bag (25 kg) = approx. 3 m² at 5 mm thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen is it walkable?\u003c\/strong\u003e \u003cbr\u003e≈24 hours at +20°C, 65% RH.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can tiling be done?\u003c\/strong\u003e \u003cbr\u003eCeramic, gres: ≈24 hours. Parquet: ≈3-5 days. Check with a moisture meter on parquet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work on sloped surfaces?\u003c\/strong\u003e \u003cbr\u003eYes. It does not run off — it stops where you apply it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness layer can be applied?\u003c\/strong\u003e \u003cbr\u003e1-10 mm at once. For deeper repairs, multiple layers with primer in between. For leveling thicker than 10 mm, \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-lr\"\u003eKeralevel Eco LR\u003c\/a\u003e is suitable up to 25 mm in one layer — more economical and faster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed?\u003c\/strong\u003e \u003cbr\u003eDepends on the substrate. Ceramic, smoothed concrete: \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e. High absorbency: \u003ca href=\"\/en\/products\/kerakoll-keradur-eco\"\u003eKeradur Eco\u003c\/a\u003e. Gypsum plaster: \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e is mandatory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e \u003cbr\u003eYes, between +5°C and +35°C. Also suitable for underfloor heating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Keralevel product should I choose?\u003c\/strong\u003e \u003cbr\u003eFor 1-10 mm floors, no rush: Keralevel Eco. If faster (2 hours) or 10-25 mm thick, or for walls: \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-lr\"\u003eKeralevel Eco LR\u003c\/a\u003e. For premium load-bearing (C30-F7 certified on ships) or flexible floor coverings: \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-ultra\"\u003eKeralevel Eco Ultra\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in winter?\u003c\/strong\u003e \u003cbr\u003eYes, but in cold weather the curing time is longer. Faster alternatives: \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-lr\"\u003eKeralevel Eco LR\u003c\/a\u003e (tileable in 2 hours) or \u003ca href=\"\/en\/products\/kerakoll-keralevel-eco-ultra\"\u003eKeralevel Eco Ultra\u003c\/a\u003e (C30-F7 premium strength).\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg","offer_id":43325714563330,"sku":"01151","price":12550.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-keralevel-eco-asvanyi-eredetu-aljzatkiegyenlitok-37230757871874.jpg?v=1702739531"},{"product_id":"kerakoll-floorzero","title":"Kerakoll Floorzero Cementoresina epoxy floor leveling compound (1.5 mm)","description":"\u003cp\u003eKerakoll Floorzero is a grayish-green structural base layer applied with a trowel on floors. It flexibly coats the existing substrate — ceramic, concrete, marble — fills joints and gaps, and cushions impacts. The Cementoresina texture layers are built on this. It can also be applied for waterproofing. This is the \"zero layer\" of the \u003ca href=\"\/en\/products\/kerakoll-cementoresina-color-collection\"\u003eCementoresina system\u003c\/a\u003e — the durable, flexible structural base.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible structural base: fills joints, follows substrate movement, cushions impacts — therefore Cementoresina layers do not crack further\u003c\/li\u003e\n\u003cli\u003eFor existing floors: tile, gres, marble, concrete — without demolition, with \u003ca href=\"\/en\/products\/kerakoll-keragrip-eco-pulep\"\u003eKeragrip Eco Pulep\u003c\/a\u003e preparation\u003c\/li\u003e\n\u003cli\u003ePart of the system: structural base of the 6-layer Cementoresina system — sold separately as it depends on the substrate\u003c\/li\u003e\n\u003cli\u003eFills gaps backward: joints, cracks, hairline cracks — does not shrink (UNI EN 12617-1), so they do not reopen\u003c\/li\u003e\n\u003cli\u003eFlexibly absorbs impacts: ≥ 6.6% elasticity (ISO 527-2) — upper layers do not break because the base cushions\u003c\/li\u003e\n\u003cli\u003eAlso for waterproofing: can be applied directly over Aquastop Extreme systems\u003c\/li\u003e\n\u003cli\u003eCompatible with underfloor heating: suitable according to EN 1903\u003c\/li\u003e\n\u003cli\u003eRequired with Cementoresina layers: not a finished surface on its own\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e10 kg (9.25 kg Part A + 0.75 kg Part B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003ethickness 1.5 mm ≈ 2.5 kg\/m\u003csup\u003e2\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage per package\u003c\/th\u003e\n\u003ctd\u003e≈ 4 m² (10 kg package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWalkable\u003c\/th\u003e\n\u003ctd\u003e6 hours (+20 °C) \/ 18 hours (+10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReady for use\u003c\/th\u003e\n\u003ctd\u003e48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired accessories\u003c\/th\u003e\n\u003ctd\u003eNet 90 mesh + Quarzo 1.3 + primer (depending on substrate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat is it suitable for?\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCement-based screed, self-leveling floor leveling compound — with \u003ca href=\"\/en\/products\/kerakoll-ep21\"\u003eEP21\u003c\/a\u003e primer\u003c\/li\u003e\n\u003cli\u003eAnhydrite screed — with a 30% mixture of \u003ca href=\"\/en\/products\/kerakoll-ep21\"\u003eEP21\u003c\/a\u003e + \u003ca href=\"\/en\/products\/kerakoll-keragrip-eco-pulep\"\u003eKeragrip Eco Pulep\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eSynthetic screed — with a mixture of EP21 + Quarzo 5.12\u003c\/li\u003e\n\u003cli\u003eExisting marble, ceramic, gres tiles — with \u003ca href=\"\/en\/products\/kerakoll-keragrip-eco-pulep\"\u003eKeragrip Eco Pulep\u003c\/a\u003e adhesion promoter\u003c\/li\u003e\n\u003cli\u003eWaterproofing — directly over Aquastop Extreme systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpaces (floor only, structural layer):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLiving spaces: living room, bedroom, hallway\u003c\/li\u003e\n\u003cli\u003eWet areas: bathroom, kitchen, stairs, shower tray\u003c\/li\u003e\n\u003cli\u003eCommercial spaces: shop, restaurant, café\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutdoor use, substrates exposed to moisture\u003c\/li\u003e\n\u003cli\u003eImproperly prepared underfloor heating\u003c\/li\u003e\n\u003cli\u003eToo wet substrates: cement-based \u003e2% (\u003e1.7% with underfloor heating), anhydrite \u003e0.5% (\u003e0.2% with underfloor heating)\u003c\/li\u003e\n\u003cli\u003eParquet, PVC, laminated parquet, linoleum\u003c\/li\u003e\n\u003cli\u003eCarrier layers containing hygroscopic materials (clay)\u003c\/li\u003e\n\u003cli\u003eAs a standalone surface (without Cementoresina layers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it for?\u003c\/strong\u003e \u003cbr\u003eThe structural base layer of the Cementoresina floor system. It flexibly coats the existing substrate, fills joints, cushions impacts. The colored Cementoresina layers are built on this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be applied on tiles?\u003c\/strong\u003e \u003cbr\u003eYes, with \u003ca href=\"\/en\/products\/kerakoll-keragrip-eco-pulep\"\u003eKeragrip Eco Pulep\u003c\/a\u003e adhesion promoter. It fills joints and provides an even base for the Cementoresina layers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with underfloor heating?\u003c\/strong\u003e \u003cbr\u003eYes, suitable according to EN 1903. Substrate moisture: cement-based max 1.7 CM%, anhydrite max 0.2 CM%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it sold separately?\u003c\/strong\u003e \u003cbr\u003eYes, always purchased separately. Cementoresina packages DO NOT include it. You need to buy separately: Floorzero + Net 90 mesh + Quarzo 1.3 + primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take to dry?\u003c\/strong\u003e \u003cbr\u003eWalkable after 6 hours (+20 °C) or 18 hours (+10 °C). Next layer can be applied after 48 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the Net 90 mesh necessary?\u003c\/strong\u003e \u003cbr\u003eStructural reinforcement. Without the mesh, cracks spread further and certification is invalid. It is mandatory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Quarzo 1.3 for?\u003c\/strong\u003e \u003cbr\u003eMechanical grip. Quartz grains embed — Cementoresina layers adhere to this. Without it, layer adhesion is poor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be applied over Aquastop waterproofing?\u003c\/strong\u003e \u003cbr\u003eYes. Sand with 120 grit paper, moisten with \u003ca href=\"\/en\/products\/kerakoll-keragrip-eco-pulep\"\u003eKeragrip Eco Pulep\u003c\/a\u003e cloth, wait 10 minutes. Apply Floorzero.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e \u003cbr\u003eYes, but expertise is required. Embedding Net 90, sealing joints, even thickness, Quarzo scattering — all critical. Without experience, leave it to a professional.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"1m2 (Floorzero 2.5kg + Quarzo 1.3 2 kg)","offer_id":42897227940098,"sku":"08446","price":21350.0,"currency_code":"HUF","in_stock":true},{"title":"10 KG","offer_id":42897227972866,"sku":"37000","price":85350.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-floorzero-protective-coatings-sealants-37449974612226.jpg?v=1702744205"},{"product_id":"kerakoll-wallzero","title":"Kerakoll Wallzero Cementoresina structural wall leveling compound (2–25 mm)","description":"\u003cp\u003eInnovative mineral matrix composite, structural base layer \u003ca href=\"\/en\/products\/kerakoll-cementoresina-wall-color-collection\"\u003efor Kerakoll Cementoresina Wall\u003c\/a\u003e and for repairing irregular substrates. Italian design for living comfort.\u003c\/p\u003e\n\n\u003cp\u003e Fast-drying cement-based finishing product with additives, high adhesion and strength, as well as compensated shrinkage. Defines a hard, flexible \"zero layer\" coating of existing vertical surfaces by fixing to the substrate and eliminating defects.\u003c\/p\u003e\n\n\u003cp\u003e Cementoresina Wall creates an ideal structural support for continuous coverings and a filling base for irregular substrates. For internal use, in domestic and commercial environments. For walls and vertical coverings.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Ideal for design renovations with small layer thicknesses\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e It sets quickly and the next layer can be applied quickly\u003cbr\u003e\n\n\u003c\/li\u003e\n\n \u003cli\u003eDurable covering for existing primer-treated mosaic, ceramic coverings, cement plaster and plasterboard\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e Can be applied directly to waterproofing made with Aquastop Nanoflex, Nanodefence Eco and Aquastop Extreme products\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Wrapping\u003c\/th\u003e\n\n\u003ctd\u003e Part A is a 25 kg bag - Part B is a 3.5 kg can\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Material requirement\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 1.5 kg\/m per \u003csup\u003e2\u003c\/sup\u003e mm thickness\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Storage\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 6 months\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"25 KG + 3.5 KG","offer_id":42897251598594,"sku":"06850, 06851","price":60850.0,"currency_code":"HUF","in_stock":true},{"title":"1 m2","offer_id":42897251631362,"sku":"02708","price":7500.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-wallzero-protective-coatings-sealants-37450033692930.jpg?v=1702742588"}],"url":"https:\/\/www.masterworks.hu\/en\/collections\/aljzat-kiegyenlitok-normal-kotesu-aljzatkiegyenlito.oembed","provider":"Masterworks Hungary","version":"1.0","type":"link"}