{"title":"Geo-mortars for concrete","description":"","products":[{"product_id":"kerakoll-geolite-magma-xenon","title":"Kerakoll Geolite Magma Xenon pourable, fiber-reinforced FRC geo-mortar (min. 15 mm)","description":"\u003cp\u003eNeed to strengthen a reinforced concrete element but no space for new rebar? Traditional methods require rebar and thick cover. Geolite Magma Xenon with \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e provides pourable, fiber-reinforced concrete — without rebar, from just 15 mm. Flexible, CVT certified, with C80\/95 strength. This is Kerakoll Geolite Magma Xenon.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeolite is the first geo-mortar for repairing damaged reinforced concrete: Kerakoll geo-binder, with near-zero shrinkage and high chemical resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced concrete strengthening without new rebar:\u003c\/strong\u003e fiber-reinforced FRC concrete with \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e — the fiber carries the load, no rebar installation needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited space, thin reinforcement:\u003c\/strong\u003e works from just 15 mm layer thickness — even where thick cover is not possible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack-resistant, flexible reinforcement:\u003c\/strong\u003e highly flexible, permanent flexural-tensile strength with 8b load resistance class (CVT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh load capacity:\u003c\/strong\u003e C80\/95 compressive strength, 43.41 GPa modulus of elasticity in fiber-reinforced system (CVT 434\/2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePourable, for formwork and arch crowns:\u003c\/strong\u003e flows and fills the mold — for vertical and horizontal elements, underpinning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for outdoor, aggressive environments:\u003c\/strong\u003e waterproof (0 mm penetration), frost resistant, wide exposure class range (X0–XA1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRusting reinforcement steel:\u003c\/strong\u003e alkaline mineral chemistry passivates existing steel (EN 1504-7)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-combustible:\u003c\/strong\u003e A1 fire resistance class — geo-binder based, mineral composition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePourable, fiber-reinforced FRC geo-mortar (with Steel Fiber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eMineral geo-binder, inorganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eCVT certified FRC (434\/2020); C80\/95 · load resistance class 8b\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003emin. 15 mm – max. 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting time\u003c\/th\u003e\n\u003ctd\u003elong, setting \u0026gt; 360 minutes (pot life ≥ 60 minutes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 20 kg\/m²\/cm; 25 kg ≈ 0.83 m² (15 mm layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing reinforced concrete and concrete — both outdoors and indoors. On horizontal concrete after \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Fiber-reinforced (FRC) strengthening, passivation, restoration, and monolithic consolidation of reinforced concrete structures and infrastructures — without embedded rebar, in thin layers: poured into formwork for vertical elements and inside arches; poured on arch crowns and mandatory cross-section underpinning. Also for precision anchoring of base plates, rods, and machinery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable:\u003c\/strong\u003e without Steel Fiber (the system is certified and complete only with the fiber); in layers thinner than 15 mm; on contaminated, loose, crumbling, or dusty substrates; on gypsum, metal, wood; on surfaces below +5 °C, above +40 °C, or frozen.\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e — adhesion and absorption control on horizontal concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Fiber reinforcement\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e — mixed with Xenon to provide FRC load capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Pourable FRC reinforcement\u003c\/th\u003e\n\u003ctd\u003eGeolite Magma Xenon — this product, fiber-reinforced, reinforcement without steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e4. Protective topcoat\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable, carbonation inhibitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eWhich pourable Geolite do you need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber-reinforced FRC, without reinforcement, ready mix:\u003c\/strong\u003e Geolite Magma Xenon — this product, CVT certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultipurpose casting, deep repair (60 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e — R4 (also FRC with Steel Fiber)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast precision anchoring, in cold conditions (20 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eGeolite Magma 20\u003c\/a\u003e — volume expanding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand\/machine application, vertical surface (2–40 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e — thixotropic, R4 (semi-fast: \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e, fast: \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003e10\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight, non-structural smoothing (2–50 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e — R2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow can a reinforced concrete element be strengthened without new steel reinforcement?\u003c\/strong\u003e\u003cbr\u003eFiber-reinforced (FRC) concrete, where steel fibers carry the tensile load instead of steel reinforcement. Geolite Magma Xenon mixed with \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e provides a pourable, fiber-reinforced reinforcement from just 15 mm layers, with CVT certification. No steel reinforcement or thick cover is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is FRC fiber-reinforced concrete?\u003c\/strong\u003e\u003cbr\u003eFRC (Fiber Reinforced Concrete) is concrete reinforced with steel fibers, where the fibers take over the role of steel reinforcement. Geolite FRC is a blend of Magma Xenon and \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e: a flexible, crack-resistant reinforcement with C80\/95 strength. The system is certified by the Italian CVT (434\/2020).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Steel Fiber required, or is it sold separately?\u003c\/strong\u003e\u003cbr\u003eGeolite Magma Xenon together with \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e forms a certified FRC system — the fiber must be added to the mix. The reinforcement’s load capacity depends on the fiber, so they must be used together. Steel Fiber is supplied separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it good that it works from 15 mm thickness?\u003c\/strong\u003e\u003cbr\u003eBecause many elements don’t have space for thick reinforcement and new rebar installation. Geolite Magma Xenon provides structural load-bearing capacity from just 15 mm thickness, without steel reinforcement. This keeps the structure slim and avoids increasing the cross-section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeolite Magma, Magma 20, or Magma Xenon — which one do I need?\u003c\/strong\u003e\u003cbr\u003eAll three pourable geo-mortars serve different purposes. Magma Xenon is a ready fiber-reinforced FRC mix — for reinforcement without rebar. \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eMagma\u003c\/a\u003e is a multi-purpose repair\/consolidation mortar (also FRC with Steel Fiber). \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eMagma 20\u003c\/a\u003e is fast and volume-expanding — for precision anchoring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors, in aggressive environments?\u003c\/strong\u003e\u003cbr\u003eYes, Geolite Magma Xenon is waterproof (0 mm water penetration), frost-resistant, and meets a wide range of exposure classes (from X0 to XA1). It is suitable for outdoor reinforced concrete structures exposed to precipitation and freeze-thaw cycles. It passivates existing rebar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed under Geolite Magma Xenon?\u003c\/strong\u003e\u003cbr\u003eFor horizontal concrete surfaces, \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation is recommended. The substrate must be clean, solid, and ≥ 5 mm rough; rust must be removed from the rebar. Before casting, wet the surface thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this mortar?\u003c\/strong\u003e\u003cbr\u003eDo not use without Steel Fiber, in layers thinner than 15 mm, on dirty or loose substrates, gypsum, metal, or wood. Do not work with it below +5 °C, above +40 °C, on frozen surfaces, or in rain. For simple, non-structural repairs, \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eNo — fiber-reinforced FRC reinforcement requires structural design and expertise: precise sizing, exact fiber ratio adherence, and professional casting. This is a certified structural intervention. We undertake the complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg","offer_id":43323491287298,"sku":"17009","price":17350.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-magma-xenon-geo-habarcsok-betonhoz-38781640638722.jpg?v=1702742061"},{"product_id":"kerakoll-geolite-magma","title":"Kerakoll Geolite Magma pourable concrete repair geo-mortar, R4 (10–100 mm)","description":"\u003cp\u003eDeep concrete defect, cavity you can’t fill with a trowel? Thixotropic mortar stops there — it doesn’t flow into formwork or between rebar. Geolite Magma is castable: it flows in, fills, self-compacts. R4 strength, 10–100 mm in one pour, 28 days \u003e 75 N\/mm². This is Kerakoll Geolite Magma.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeolite is the first geo-mortar for repairing damaged reinforced concrete: Kerakoll geo-binder, with near-zero shrinkage and high chemical resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cavity, casting into formwork, between dense reinforcement:\u003c\/strong\u003e castable geo-mortar — flows in, fills, self-compacts where a trowel can’t reach\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad-bearing structure restoration:\u003c\/strong\u003e Class R4, 28 days \u003e 75 N\/mm² compressive strength — high strength, monolithic consolidation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick cross-section replacement in one go:\u003c\/strong\u003e 10–100 mm in one pour (above 60 mm with \u003ca href=\"\/en\/products\/kerakoll-kerabuild-ghiaia\"\u003eGhiaia 3.6\u003c\/a\u003e additive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision anchoring of machines, base plates, rods:\u003c\/strong\u003e cast into holes or formwork — adhesion of cast rod \u003e 25 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenty of working time:\u003c\/strong\u003e normal, 60-minute set, ≥ 45 minutes pot life — comfortable even for large pours (need fast? \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eGeolite Magma 20\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber-reinforced reinforcement without rebar:\u003c\/strong\u003e the castable base of the certified Geolite FRC system with \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRusting reinforcing steel:\u003c\/strong\u003e alkaline mineral chemistry passivates the steel (EN 1504-7) — stops corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-combustible:\u003c\/strong\u003e A1 fire resistance class — geo-binder based, mineral composition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCastable concrete repair geo-mortar (indoor and outdoor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eMineral geo-binder, inorganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eClass R4 (EN 1504-3); compressive strength at 28 days \u003e 75 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003e10 – 100 mm (above 60 mm with Ghiaia 3.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting time\u003c\/th\u003e\n\u003ctd\u003enormal, ≈ 60 minutes (pot life ≥ 45 minutes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 19 kg\/m²\/cm; 25 kg ≈ 1.3 m² (10 mm layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing reinforced concrete and concrete — indoors and outdoors. Deep restoration of damaged, eroded, hollow concrete structures. On horizontal concrete after \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Passivation, restoration, and monolithic consolidation of reinforced concrete structures and infrastructures by casting — into formwork for vertical elements, arch crowns, underpinning; precision anchoring of machines, base plates, tendons, rods; the castable base structure of the certified Geolite FRC fiber-reinforced system made with \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e contaminated, loose, crumbling, or dusty substrates; gypsum, metal, or wood; layers thinner than 10 mm and vertical surfaces applied with a trowel without formwork (for that use the thixotropic \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e); surfaces below +5 °C, above +40 °C, or frozen.\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e — adhesion and absorption control on horizontal concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Pourable repair\u003c\/th\u003e\n\u003ctd\u003eGeolite Magma — this product, R4 consolidation by casting, 10–100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2\/b. Fiber reinforcement (optional)\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e — for the Geolite FRC system, without reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Protective topcoat\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable, carbonation inhibitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eWhich pourable Geolite do you need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultipurpose casting, deep repair, if you have time (60 minutes):\u003c\/strong\u003e Geolite Magma — this product, R4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast precision anchoring, in cold (20 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eGeolite Magma 20\u003c\/a\u003e — pourable, volume expanding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber-reinforced FRC, without reinforcement, ready mix:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eGeolite Magma Xenon\u003c\/a\u003e — CVT certified, flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual\/machine application, vertical surface (2–40 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e — thixotropic, R4 (medium fast: \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e, fast: \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003e10\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight, non-structural smoothing (2–50 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e — R2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to fill a deep concrete defect or cavity?\u003c\/strong\u003e\u003cbr\u003ePourable, R4 class concrete repair with geo-mortar that flows in and self-compacts. Geolite Magma flows into formwork, cavities, and dense reinforcement, 10–100 mm thick in one pour. Thixotropic mortar applied with a trowel does not fill such depths evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between pourable and thixotropic concrete repair?\u003c\/strong\u003e\u003cbr\u003eThe pourable mortar (Geolite Magma) flows in and fills the formwork — for formwork, cavities, deep repairs. The thixotropic mortar (\u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e) does not flow, it stays in place on vertical surfaces and overhead. For deep, cast repairs use the pourable, for thin surface repairs use the thixotropic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the R4 class mean?\u003c\/strong\u003e\u003cbr\u003eR4 is the highest structural repair mortar class according to EN 1504-3. It is high strength, suitable for restoring load-bearing structures — Geolite Magma’s 28-day compressive strength is \u0026gt; 75 N\/mm². R3 and R2 are weaker, not for structural repairs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick can this castable mortar be poured?\u003c\/strong\u003e\u003cbr\u003eBetween 10 and 100 mm in one pour. 10 mm is the minimum. For layers over 60 mm, \u003ca href=\"\/en\/products\/kerakoll-kerabuild-ghiaia\"\u003eGhiaia 3.6\u003c\/a\u003e gravel must be added to reduce hydration heat. For layers thinner than 10 mm, the thixotropic \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e is suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeolite Magma, Magma 20, or Magma Xenon — which one do I need?\u003c\/strong\u003e\u003cbr\u003eAll three are castable, R4 geo-mortars for different tasks. Magma is multipurpose, normal setting (60 minutes) — for deep repairs and casting. \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eMagma 20\u003c\/a\u003e is fast (20 minutes), volume-expanding — for precision anchoring. \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eMagma Xenon\u003c\/a\u003e is a ready fiber-reinforced FRC mix for reinforcement without rebar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Geolite FRC fiber-reinforced system?\u003c\/strong\u003e\u003cbr\u003eGeolite FRC is a mixture of Geolite Magma and \u003ca href=\"\/en\/products\/kerakoll-steel-fiber\"\u003eSteel Fiber\u003c\/a\u003e steel fibers — a castable, fiber-reinforced concrete reinforcement. It provides structural load-bearing capacity without built-in rebar, certified by CVT. The fibers are added to the mix in the ratio specified in the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed under the castable mortar?\u003c\/strong\u003e\u003cbr\u003eOn horizontal concrete surfaces, \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation is recommended for proper absorption. Always use a clean, solid, ≥ 5 mm rough substrate; rust must be cleaned off the rebar. Before casting, wet the surface to saturation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many m² does a 25 kg bag cover?\u003c\/strong\u003e\u003cbr\u003eMaterial requirement ≈ 19 kg\/m² per centimeter. For a 10 mm layer, a 25 kg bag covers ≈ 1.3 m², for 50 mm ≈ 0.26 m². For deep casting, many bags are needed due to the large thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this mortar?\u003c\/strong\u003e\u003cbr\u003eDo not use in layers thinner than 10 mm, on vertical surfaces with a trowel (without formwork), on contaminated, loose, or dusty substrates, on gypsum, metal, or wood. Do not work with it below +5 °C, above +40 °C, on frozen surfaces, or in rain. For thin, manual repairs, the thixotropic \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e is suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eFormwork, cast pouring, and fiber-reinforced FRC or Geosteel reinforcement require structural design and expertise — the load-bearing capacity depends on it. Minor cast repairs can be done by an experienced hand. We also undertake complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg \/ Normal","offer_id":43323490894082,"sku":"05817","price":17350.0,"currency_code":"HUF","in_stock":true},{"title":"25 kg \/ Expired (-50%)","offer_id":54903436509508,"sku":"05817-exp","price":5205.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-magma-geo-habarcsok-betonhoz-38781629923586.jpg?v=1702741875"},{"product_id":"kerakoll-geolite-magma-20","title":"Kerakoll Geolite Magma 20 pourable, volume-expanding anchoring geo-mortar, R4 (10–100 mm)","description":"\u003cp\u003eNeed to precisely anchor a machine or base plate? Shrinking mortar pulls away from the edge — loosening the fastening. Geolite Magma 20 is volume-expanding: it fills the space and holds tight. Pourable, sets in 20 minutes, R4 strength, 28 days \u003e 80 N\/mm². This is Kerakoll Geolite Magma 20.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeolite is the first geo-mortar for repairing damaged reinforced concrete: Kerakoll geo-binder, with near-zero shrinkage and high chemical resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision anchoring of machine, base plate, precast element:\u003c\/strong\u003e volume-expanding casting — fills the gap and holds tight, does not shrink from the edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast commissioning:\u003c\/strong\u003e 20 minutes setting — the element can be loaded quickly, no installation delay (pot life ≈ 15 minutes, mix in small batches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks even in cold:\u003c\/strong\u003e fast even at low temperatures — industrial and airport floors, sidewalks in winter too\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh load capacity:\u003c\/strong\u003e Class R4, 28 days \u003e 80 N\/mm² — one of the strongest in the family\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep, cast repair:\u003c\/strong\u003e 10–100 mm in one pour (above 60 mm with \u003ca href=\"\/en\/products\/kerakoll-kerabuild-ghiaia\"\u003eGhiaia 3.6\u003c\/a\u003e additive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManhole cover, railing, signpost, channel cover fastening:\u003c\/strong\u003e cast rod adhesion \u003e 25 N\/mm² — secure, durable fastening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRusting reinforcing steel:\u003c\/strong\u003e alkaline mineral chemistry passivates the iron (EN 1504-7)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-combustible:\u003c\/strong\u003e A1 fire resistance class — geo-binder based, mineral composition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePourable, volume-expanding anchoring geo-mortar (indoor and outdoor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eMineral geo-binder, inorganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eClass R4 (EN 1504-3); compressive strength 28 days \u003e 80 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003emin. 10 mm – max. 100 mm (above 60 mm with Ghiaia 3.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting time\u003c\/th\u003e\n\u003ctd\u003efast, ≈ 20 minutes (pot life ≈ 15 minutes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 19.5 kg\/m²\/cm; 25 kg ≈ 1.3 m² (10 mm layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 6 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing reinforced concrete and concrete — indoors and outdoors. On horizontal concrete after \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Precision fastening and structural anchoring of base plates, tensioners, plates, machines, precast structures, manhole covers, shafts, fences, signposts, guardrails; passivation, restoration, and monolithic consolidation of reinforced concrete structures by casting — especially for industrial and airport floors, sidewalks where low temperature and rapid commissioning are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e contaminated, loose, crumbling, or dusty substrates; gypsum, metal, or wood; layers thinner than 10 mm and vertical surfaces applied with a trowel without formwork (use thixotropic \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e for that); surfaces below +5 °C, above +40 °C, or frozen.\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e — adhesion and absorption control on horizontal concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Pourable anchoring\u003c\/th\u003e\n\u003ctd\u003eGeolite Magma 20 — this product, volume-expanding R4 casting, 10–100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Protective topcoat\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable, carbonation-inhibiting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eWhich pourable Geolite do you need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultipurpose casting, deep repair, no rush (60 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e — R4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast precision anchoring, in cold (20 minutes):\u003c\/strong\u003e Geolite Magma 20 — this product, volume-expanding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber-reinforced FRC, without reinforcement, ready mix:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eGeolite Magma Xenon\u003c\/a\u003e — CVT certified, flexible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual\/machine application, vertical surface (2–40 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e — thixotropic, R4 (semi-fast: \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e, fast: \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003e10\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight, non-structural smoothing (2–50 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e — R2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow can a machine or base plate be anchored precisely into concrete?\u003c\/strong\u003e\u003cbr\u003ePourable, volume-expanding R4 anchoring mortar that fills the gap and does not shrink. Geolite Magma 20 holds tightly, sets in 20 minutes, and the adhesion of the poured rod is \u0026gt; 25 N\/mm². Use it poured into formwork or the hole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does volume-expanding mortar mean?\u003c\/strong\u003e\u003cbr\u003eThe volume-expanding (shrinkage-compensated) mortar does not shrink during setting. Thus, no gap remains around the anchored element — it provides a tight, gap-free fixation. This is crucial for precision machine foundations and manhole cover anchoring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow fast does it set, and when can it be loaded?\u003c\/strong\u003e\u003cbr\u003eGeolite Magma 20 sets in about 20 minutes at +21 °C, with a pot life of about 15 minutes. It sets slower in cold: about 35–40 minutes at +5 °C. Due to fast setting, only mix as much as you can pour in a short time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the R4 class mean?\u003c\/strong\u003e\u003cbr\u003eR4 is the highest structural repair mortar class according to EN 1504-3. High strength, for load-bearing structures — Magma 20’s 28-day compressive strength is \u003e 80 N\/mm², one of the strongest in the family. R3 and R2 are weaker, non-structural.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeolite Magma, Magma 20, or Magma Xenon — which one do I need?\u003c\/strong\u003e\u003cbr\u003eAll three are pourable, R4 geo-mortars for different tasks. Magma 20 is fast (20 minutes) and volume-expanding — for precision anchoring, even in cold conditions. \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eMagma\u003c\/a\u003e is multipurpose, normal setting (60 minutes), for deep repairs. \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eMagma Xenon\u003c\/a\u003e is a ready fiber-reinforced FRC mix for reinforcement without rebar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick can it be poured?\u003c\/strong\u003e\u003cbr\u003eBetween 10 and 100 mm in one pour. 10 mm is the minimum. Above 60 mm, add \u003ca href=\"\/en\/products\/kerakoll-kerabuild-ghiaia\"\u003eGhiaia 3.6\u003c\/a\u003e gravel to reduce hydration heat. For thinner, manual repairs, the thixotropic \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e is suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed under the anchoring mortar?\u003c\/strong\u003e\u003cbr\u003eOn horizontal concrete surfaces, \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation is recommended. The substrate must be clean, solid, and ≥ 5 mm rough; rust must be cleaned off the rebar. Before casting, wet the surface thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this anchoring mortar?\u003c\/strong\u003e\u003cbr\u003eDo not use in layers thinner than 10 mm, on vertical surfaces with a trowel (without formwork), on dirty, loose, dusty substrates, gypsum, metal, or wood. Do not work with it below +5 °C, above +40 °C, on frozen surfaces, or in rain. For thin, manual repairs, the thixotropic \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e is suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eFormwork and precision, fast-setting casting require expertise — machine foundation and anchoring require structural knowledge. Smaller cast fixings can be done by skilled hands. We also undertake complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg","offer_id":43323490337026,"sku":"05818","price":20850.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-magma-20-geo-habarcsok-betonhoz-38781615309058.jpg?v=1702741878"},{"product_id":"kerakoll-geolite-microsilicato","title":"Kerakoll Geolite Microsilicato carbonation-inhibiting, breathable concrete geo-paint","description":"\u003cp\u003eIs your exposed concrete facade cracking and crumbling? CO₂ from the air penetrates the concrete, causing the steel to rust — the concrete flakes off. Geolite Microsilicato silicate geo-paint blocks CO₂ but allows moisture to escape. It resists algae, mold, and weather. This is Kerakoll Geolite Microsilicato.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection of carbonated, aging exposed concrete:\u003c\/strong\u003e blocks CO₂ (sD \u0026gt; 50 m) — slows down steel corrosion, preventing further concrete flaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamp, humid concrete:\u003c\/strong\u003e allows moisture to escape (Class I, SD \u0026lt; 5 m) — moisture does not get trapped, the surface breathes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlgae, mold, moss on the facade:\u003c\/strong\u003e resists microorganisms and weather — cleaner, more durable surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing repaired concrete:\u003c\/strong\u003e can be applied 4 hours after repair with \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e — protection is ready within one day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven, matte aesthetic:\u003c\/strong\u003e fine-grained, vibrant matte effect — unifies repaired and old concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor exterior and interior use:\u003c\/strong\u003e on facades, balcony undersides, eaves, industrial and residential buildings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure silicate binder:\u003c\/strong\u003e potassium silicate — mineral-based, chemically bonds with concrete, not a film-forming plastic layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCarbonation-inhibiting, breathable concrete geo-paint (exterior and interior)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003ePure potassium silicate (mineral)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eCO₂ barrier sD \u0026gt; 50 m · moisture permeability Class I (SD \u0026lt; 5 m); surface protection EN 1504-2 (C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial consumption\u003c\/th\u003e\n\u003ctd\u003e≈ 0.35 l\/m² (2 coats); 4 l ≈ 11 m² · 14 l ≈ 40 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2 coats, ≈ 12 hours waiting time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eBucket 4 l \/ 14 l (White, Colored A, Colored AA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months (not frost-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Mature, dimensionally stable, dense concrete and reinforced concrete — exposed concrete facades, balcony undersides, eaves, residential, commercial, and industrial buildings. Concrete repaired with Geolite family geo-mortars or traditional mortar. Mature plasters and mineral substrates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Breathable, decorative protection against carbonation for new or repaired concrete structures; surface protection for reinforcement systems based on \u003ca href=\"\/en\/products\/kerakoll-geolite-gel\"\u003eGeolite Gel\u003c\/a\u003e or Geocalce. For exterior and interior use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e damp, immature, contaminated, loose, or dusty substrates; moisture-sealed (dehumidifying) plasters; gypsum-based substrates; surfaces exposed to water storage, continuous water contact, or rising damp.\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003eclean, mature, dense concrete — dimensionally stable substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Concrete repair\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e — R4 volume restoration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Protective topcoat\u003c\/th\u003e\n\u003ctd\u003eGeolite Microsilicato — this product, carbonation-inhibiting, breathable, 2 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow can carbonation and flaking of concrete facades be prevented?\u003c\/strong\u003e\u003cbr\u003eWith a carbonation-inhibiting, breathable silicate geo-paint that blocks CO₂ but allows moisture to escape. Geolite Microsilicato has a CO₂ diffusion equivalent sD \u0026gt; 50 m — it slows steel corrosion, preventing further concrete flaking. It can be applied in two coats with a roller or brush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is carbonation?\u003c\/strong\u003e\u003cbr\u003eCarbonation occurs when CO₂ from the air penetrates the concrete and lowers its alkalinity. This causes the steel reinforcement to lose its protection and start rusting — rust expands, causing the concrete to flake. A CO₂-blocking, breathable geo-paint prevents this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is silicate paint better on concrete than plastic paint?\u003c\/strong\u003e\u003cbr\u003eSilicate (potassium silicate) paint chemically bonds with the concrete and breathes — it allows moisture to escape. Film-forming plastic paint traps moisture behind it, which accumulates and causes peeling. Geolite Microsilicato has Class I moisture permeability (SD \u0026lt; 5 m).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can repaired concrete be painted?\u003c\/strong\u003e\u003cbr\u003eConcrete repaired with \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e geo-mortar can be painted with Microsilicato after 4 hours. The concrete must be mature and dimensionally stable. The paint seals and unifies the repaired surface within one day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area does one bucket cover?\u003c\/strong\u003e\u003cbr\u003eMaterial consumption is approximately 0.35 l\/m² in two coats on a fine-grained substrate. A 4 l bucket covers about 11 m², a 14 l bucket about 40 m². Rough or absorbent surfaces consume more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used indoors?\u003c\/strong\u003e\u003cbr\u003eYes, Geolite Microsilicato is suitable for both exterior and interior use. It is a breathable silicate coating that works well on indoor concrete surfaces. However, do not use it on surfaces exposed to continuous water contact in wet rooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use it?\u003c\/strong\u003e\u003cbr\u003eDo not apply on damp, immature, dusty, or loose concrete, gypsum, or moisture-sealed plaster. It is also unsuitable for surfaces exposed to water storage, continuous water contact, or rising damp. The surface must be clean, dense, and dimensionally stable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eYes, it can be applied with a roller or brush in two coats, with about 12 hours waiting time. However, facade work requires scaffolding, consistent technique, and prior concrete repair. We also offer complete facade renovation services.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"White \/ 14 L","offer_id":42756200628482,"sku":"05816","price":118600.0,"currency_code":"HUF","in_stock":true},{"title":"White \/ 4L","offer_id":43323497087234,"sku":"06660","price":38200.0,"currency_code":"HUF","in_stock":true},{"title":"Color A \/ 14 L","offer_id":42756200661250,"sku":"GeoLite MicroSilicato - Color A \/ 14 L","price":134750.0,"currency_code":"HUF","in_stock":true},{"title":"Color A \/ 4L","offer_id":43323497120002,"sku":"GeoLite MicroSilicato - Color A \/ 4 L","price":42900.0,"currency_code":"HUF","in_stock":true},{"title":"Color AA \/ 14 L","offer_id":42756200694018,"sku":"GeoLite MicroSilicato - Color AA \/ 14 L","price":159100.0,"currency_code":"HUF","in_stock":true},{"title":"Color AA \/ 4L","offer_id":43323497152770,"sku":"GeoLite MicroSilicato - Color AA \/ 4 L","price":49750.0,"currency_code":"HUF","in_stock":true},{"title":"Color B \/ 14 L","offer_id":42756200726786,"sku":"GeoLite MicroSilicato - Color B \/ 14 L","price":122250.0,"currency_code":"HUF","in_stock":true},{"title":"Color B \/ 4L","offer_id":43323497185538,"sku":"GeoLite MicroSilicato - Color B \/ 4 L","price":39250.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-microsilicato-geo-habarcsok-betonhoz-38781594730754.jpg?v=1702741883"},{"product_id":"kerakoll-geolite","title":"Kerakoll Geolite thixotropic concrete repair geo-mortar, R4 (2–40 mm)","description":"\u003cp\u003eIs the concrete chipped, exposing rusty reinforcement? Cement patches are a different material — they don’t adhere, crack again, and the steel continues to rust. Geolite mineral geo-mortar: R4 strength, and alkaline chemistry passivates the concrete steel. One material with the concrete, monolithic repair. 2–40 mm in one layer, by hand or machine. This is Kerakoll Geolite.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeolite is the first geo-mortar for repairing damaged reinforced concrete: Kerakoll geo-binder, with near-zero shrinkage and high chemical resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair of chipped, crumbling reinforced concrete:\u003c\/strong\u003e mineral geo-mortar, class R4 (EN 1504-3) — one material with the concrete, not a patch that peels off again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRusting concrete reinforcement:\u003c\/strong\u003e pH ≥ 12.5 alkaline chemistry passivates the steel (EN 1504-7) — stops corrosion, not just covers it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not sag overhead or on vertical surfaces:\u003c\/strong\u003e thixotropic consistency — 2–40 mm in one layer, holds on columns, beams, underside of slabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge surfaces, machine application:\u003c\/strong\u003e can be applied with continuous cycle pump — bridges, garage slabs, industrial floors progress quickly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime needed for application:\u003c\/strong\u003e normal, 80-minute setting time — comfortable working window for large repairs (need fast? \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial for structural reinforcement:\u003c\/strong\u003e the inorganic base structure of Geosteel SRG systems — embeds the \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e steel mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise fixing of metal elements:\u003c\/strong\u003e anchors rods, washers, machines to reinforced concrete by pressing into holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-combustible:\u003c\/strong\u003e A1 fire resistance class — natural mineral, geo-binder based composition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eThixotropic concrete repair geo-mortar (for outdoor and indoor use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eMineral geo-binder, inorganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eClass R4 (EN 1504-3); compressive strength 28 days \u0026gt; 50 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003emin. 2 mm – max. 40 mm \/ layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting time\u003c\/th\u003e\n\u003ctd\u003enormal, ≈ 80 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 17 kg\/m²\/cm; 25 kg ≈ 1.5 m² (10 mm layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing reinforced concrete and concrete — for outdoor and indoor use. Repair of damaged, chipped, eroded concrete structures. On horizontal concrete surfaces after \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Local and general restoration, smoothing, monolithic protection of reinforced concrete structures; reinforcing steel passivation; anchoring rods, base plates, machines; the base structure of the \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e steel fabric (SRG) structural reinforcement systems. Especially suitable for medium and large surface interventions, machine application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e contaminated, loose, crumbling, or dusty substrates; gypsum, metal, or wood; surfaces below +5 °C, above +40 °C, or frozen; liquid casting, formwork (for that use \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e); non-structural, aesthetic thin smoothing (for that use \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e — adhesion and absorption control on horizontal concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Repair mortar\u003c\/th\u003e\n\u003ctd\u003eGeolite — this product, R4 volume restoration, 2–40 mm, reinforcing steel passivation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Protective topcoat\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable, carbonation inhibitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Geolite mortar is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge surface, normal (80 minutes):\u003c\/strong\u003e Geolite — this product, R4, the basis of the Geosteel SRG system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame-day handover, semi-fast (40 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e — R4, waterproof, paintable after 4 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast setting, in cold (10 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e — R4, waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoured into formwork, 10–100 mm:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e — pourable, R4 (anchoring: \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eMagma 20\u003c\/a\u003e, fiber-reinforced FRC: \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eXenon\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight aesthetic smoothing (2–50 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e — R2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can be used to repair chipped, crumbling concrete?\u003c\/strong\u003e\u003cbr\u003eWith a mineral, R4 class concrete repair mortar that passivates the exposed reinforcing steel. Geolite geo-mortar is a material with the concrete: not a patch that peels off again. First, remove the bad concrete down to the healthy part, and clean the rust off the steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does reinforcing steel rust, and how can it be stopped?\u003c\/strong\u003e\u003cbr\u003eReinforcing steel rusts when concrete carbonates or peels off, exposing the steel to air. Geolite’s alkaline chemistry (pH ≥ 12.5) passivates the steel again according to EN 1504-7. Rust must be cleaned off before application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the R4 class mean for concrete repair mortar?\u003c\/strong\u003e\u003cbr\u003eR4 is the highest structural repair mortar class according to EN 1504-3. It is high strength (compressive strength at 28 days \u003e 50 N\/mm²), suitable for restoring load-bearing structures. R3 and R2 are weaker, not for structural repairs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is thixotropic mortar?\u003c\/strong\u003e\u003cbr\u003eThixotropic mortar does not slump: it holds on vertical surfaces and overhead. Geolite can thus be applied on columns, beams, and under slabs in layers 2–40 mm thick. For casting into formwork, use the pourable \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeolite, Geolite 40, or Geolite 10 — which one do I need?\u003c\/strong\u003e\u003cbr\u003eAll three are R4 thixotropic concrete repair mortars, only the setting time differs. Geolite normal (80 minutes) — for large surfaces, machine application. \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e semi-fast (40 minutes), for same-day handover. \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e fast (10 minutes), for fixing and cold conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed under the concrete repair mortar?\u003c\/strong\u003e\u003cbr\u003eNot on vertical, healthy concrete: just wet the surface until saturation. On horizontal concrete surfaces, \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation is recommended. The substrate must always be clean, solid, and rough.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many m² does a 25 kg bag cover?\u003c\/strong\u003e\u003cbr\u003eMaterial requirement ≈ 17 kg\/m² per centimeter. For 10 mm repair, a 25 kg bag covers ≈ 1.5 m², for 20 mm ≈ 0.7 m². Thicker layers should be built up in multiple passes, max. 40 mm per layer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this concrete repair?\u003c\/strong\u003e\u003cbr\u003eDo not apply on contaminated, loose, dusty, or crumbling substrates, gypsum, metal, or wood. Do not work below +5 °C, above +40 °C, on frozen surfaces, in rain, or in strong sunlight. For casting into formwork use \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e, for aesthetic thin smoothing use \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eSmall, surface concrete repairs can be done by hand: demolition, cleaning, wetting, application. However, structural restoration and Geosteel reinforcement systems require structural design and expertise. We also undertake complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg \/ Normal","offer_id":43323473264898,"sku":"02892","price":17500.0,"currency_code":"HUF","in_stock":true},{"title":"25 kg \/ Expired (-50%)","offer_id":54903270605124,"sku":"02892-exp","price":8750.0,"currency_code":"HUF","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-geo-habarcsok-betonhoz-38778456998146.jpg?v=1702742057"},{"product_id":"kerakoll-geolite-10","title":"Kerakoll Geolite 10 fast-setting concrete repair geo-mortar, R4 (2–40 mm)","description":"\u003cp\u003eFrom railing to manhole cover — do you have to wait for it to set before loading? Slow mortar sits for hours, work stops. Geolite sets in 10 minutes, loadable and paintable after 4 hours. R4 strength, fast setting even in cold. This is Kerakoll Geolite 10.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeolite is the first geo-mortar for repairing damaged reinforced concrete: Kerakoll geo-binder, with near-zero shrinkage and high chemical resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast fixing, anchoring — railing, column, manhole cover, street furniture:\u003c\/strong\u003e 10 minutes setting — work doesn’t stop, quickly loadable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete repair when there’s no time to wait:\u003c\/strong\u003e loadable and paintable after 4 hours — ready the same day, can be covered with \u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eMicroSilicato\u003c\/a\u003e too\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgresses even in cold weather:\u003c\/strong\u003e sets quickly even at +5 °C (≈ 22–25 minutes) — won’t stop on cool mornings or in winter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad-bearing repair:\u003c\/strong\u003e Class R4, 28 days \u0026gt; 45 N\/mm² — structural strength, not just patching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRusting reinforcing steel:\u003c\/strong\u003e pH ≥ 12.5 alkaline chemistry passivates the iron (EN 1504-7) — stops corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not run even overhead or on vertical surfaces:\u003c\/strong\u003e thixotropic consistency — 2–40 mm in one layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExposed to precipitation, wet locations:\u003c\/strong\u003e waterproof — outdoors, in shafts, at manhole covers as well\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-combustible:\u003c\/strong\u003e A1 fire resistance class — geo-binder based, mineral composition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFast-setting thixotropic concrete repair geo-mortar (indoor and outdoor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eMineral geo-binder, inorganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eClass R4 (EN 1504-3); compressive strength 28 days \u0026gt; 45 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003emin. 2 mm – max. 40 mm \/ layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting time\u003c\/th\u003e\n\u003ctd\u003efast, ≈ 10 minutes · loadable\/paintable after 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 17.5 kg\/m²\/cm; 25 kg ≈ 1.4 m² (10 mm layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eBag 25 \/ 15 \/ 5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 6 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing reinforced concrete and concrete — indoors and outdoors. Quick repair of damaged, spalled concrete structures. On horizontal concrete after \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Fast, precision fixing and structural anchoring — hooks, pipe spacers, frames, sanitary fixtures, columns, railings, manhole covers, shafts, public and street furniture. Local and general repair of reinforced concrete where quick commissioning or low temperature is a factor; anchoring rods, base plates, machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e contaminated, loose, crumbling, or dusty substrates; gypsum, metal, or wood; surfaces below +5 °C, above +40 °C, or frozen; where long working time is needed on large surfaces (use \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e for that); for pouring into formwork (use \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e for that).\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e — adhesion and absorption control on horizontal concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Repair mortar\u003c\/th\u003e\n\u003ctd\u003eGeolite 10 — this product, R4 fast repair\/fixing, 2–40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Protective topcoat\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable, carbonation inhibitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Geolite mortar do you need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual\/machine repair, large surface, 2–40 mm, no rush (80 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e — R4, the basis of the Geosteel SRG system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame-day handover, semi-fast (40 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e — R4, waterproof, paintable after 4 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast fixing, anchoring, in cold (10 minutes):\u003c\/strong\u003e Geolite 10 — this product, R4, waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoured into formwork, 10–100 mm:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e — pourable, R4 (anchoring: \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eMagma 20\u003c\/a\u003e, fiber-reinforced FRC: \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eXenon\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight aesthetic smoothing, non-structural (2–50 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e — R2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can be used to quickly fix railings, posts, or manhole covers into concrete?\u003c\/strong\u003e\u003cbr\u003eFast-setting, R4 class concrete repair geo-mortar that sets in 10 minutes. Geolite sets in 10 minutes and can be loaded after 4 hours — for precise fixing of railings, posts, manhole covers, and street furniture. Fill the hole or recess and hold it in place until it sets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow fast does it set, and when can it be loaded?\u003c\/strong\u003e\u003cbr\u003eThe setting time of Geolite 10 at +21 °C is approximately 10 minutes, and it can be loaded and painted after 4 hours. It sets slower in cold: at +5 °C, setting takes about 22–25 minutes. It sets faster in heat — at +30 °C, about 3–4 minutes, so mix in small batches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in cold weather?\u003c\/strong\u003e\u003cbr\u003eYes, Geolite 10 can be worked at low temperatures: it sets quickly even at +5 °C. The application temperature range is between +5 °C and +40 °C — it cannot be applied on frozen surfaces. It was developed precisely for cold, fast jobs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the R4 class mean for concrete repair mortar?\u003c\/strong\u003e\u003cbr\u003eR4 is the highest structural repair mortar class according to EN 1504-3. It is suitable for restoring high-strength, load-bearing structures — Geolite 10 has a 28-day compressive strength \u0026gt; 45 N\/mm². R3 and R2 are weaker and not for structural repairs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeolite, Geolite 40, or Geolite 10 — which one do I need?\u003c\/strong\u003e\u003cbr\u003eAll three are R4 thixotropic concrete repair mortars, only the setting time differs. Geolite 10 is fast (10 minutes) — for fixing and cold weather. \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e is semi-fast (40 minutes), for same-day handover. \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e is normal (80 minutes), for large surfaces and machine application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the concrete repair paintable and waterproof?\u003c\/strong\u003e\u003cbr\u003eGeolite 10 is waterproof, and the repair can be painted after 4 hours. It can be used outdoors, in pits, and in places exposed to precipitation. For carbonation-resistant, breathable protection, \u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e paint can be applied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed under the concrete repair mortar?\u003c\/strong\u003e\u003cbr\u003eDo not use on vertical, healthy concrete — just moisten the surface until saturation. For horizontal concrete surfaces, \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation is recommended. The substrate must always be clean, solid, and rough.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this fast concrete repair?\u003c\/strong\u003e\u003cbr\u003eFor large surfaces requiring long working times, do not use it — the slower \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e are suitable. Do not apply on contaminated, loose, dusty substrates, gypsum, metal, wood, or frozen surfaces. Due to the fast setting, always mix in small batches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eSmall, quick fixing or surface repair can be done by an experienced hand. However, the fast setting leaves little room for error, and structural restoration requires static knowledge. We also undertake complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg","offer_id":43323443642626,"sku":"05813","price":17500.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-10-geo-habarcsok-betonhoz-38781552656642.jpg?v=1702742059"},{"product_id":"kerakoll-geolite-40","title":"Kerakoll Geolite 40 semi-fast concrete repair geo-mortar, R4 (2–40 mm)","description":"\u003cp\u003eWant to finish the concrete repair the same day? Normal mortar sets by the next day — you can’t complete the job. Geolite sets in 40 minutes, is loadable and paintable after 4 hours. R4 strength, for medium and large surfaces. This is Kerakoll Geolite 40.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeolite is the first geo-mortar for repairing damaged reinforced concrete: Kerakoll geo-binder, with near-zero shrinkage and high chemical resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame-day handover, medium-large surfaces:\u003c\/strong\u003e semi-fast, 40-minute setting — you work, set, and finish in one day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to apply yet fast:\u003c\/strong\u003e 40-minute working window, but paintable after 4 hours — can be coated with \u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eMicroSilicato\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad-bearing repair:\u003c\/strong\u003e Class R4, 28 days \u0026gt; 45 N\/mm² — structural strength, not just patching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRusting reinforcing steel:\u003c\/strong\u003e pH ≥ 12.5 alkaline chemistry passivates the steel (EN 1504-7) — stops corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks even in cool weather:\u003c\/strong\u003e setting at +5 °C ≈ 180–195 minutes — work does not stop in cold conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not run on overhead or vertical surfaces:\u003c\/strong\u003e thixotropic consistency — 2–40 mm in one layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExposed to precipitation, wet locations:\u003c\/strong\u003e waterproof — suitable for outdoor, exposed structures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-combustible:\u003c\/strong\u003e A1 fire resistance class — geo-binder based, mineral composition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSemi-fast thixotropic concrete repair geo-mortar (for outdoor and indoor use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eMineral geo-binder, inorganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eClass R4 (EN 1504-3); compressive strength 28 days \u0026gt; 45 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003emin. 2 mm – max. 40 mm \/ layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting time\u003c\/th\u003e\n\u003ctd\u003esemi-fast, ≈ 40 minutes · loadable\/paintable after 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 17 kg\/m²\/cm; 25 kg ≈ 1.5 m² (10 mm layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eBags 25 \/ 15 \/ 5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing reinforced concrete and concrete — both outdoor and indoor. Repair of damaged, chipped, and eroded concrete structures. On horizontal concrete after \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Local and general restoration, smoothing, and monolithic protection of reinforced concrete structures; passivation of reinforcing steel; precision anchoring of rods, base plates, and machinery. Especially suitable for medium and large surface interventions where fast execution and same-day handover are the goal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e contaminated, loose, crumbling, or dusty substrates; gypsum, metal, or wood; surfaces below +5 °C, above +40 °C, or frozen; very fast fixing where it must set within minutes (use \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e for that); pouring into formwork (use \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e for that).\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e — adhesion and absorption control on horizontal concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Repair mortar\u003c\/th\u003e\n\u003ctd\u003eGeolite 40 — this product, R4 repair, 2–40 mm, same-day delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Protective topcoat\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable, carbonation-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Geolite mortar do you need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual\/machine repair, large surface, 2–40 mm, if you have time (80 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e — R4, the basis of the Geosteel SRG system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame-day delivery, semi-fast (40 minutes):\u003c\/strong\u003e Geolite 40 — this product, R4, waterproof, paintable after 4 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast fixing, anchoring, in cold (10 minutes):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e — R4, waterproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoured into formwork, 10–100 mm:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e — pourable, R4 (anchoring: \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eMagma 20\u003c\/a\u003e, fiber-reinforced FRC: \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eXenon\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight aesthetic smoothing, non-structural (2–50 mm):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-silt\"\u003eGeolite Silt\u003c\/a\u003e — R2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow can concrete repairs be sealed the same day?\u003c\/strong\u003e\u003cbr\u003eWith a semi-fast setting, R4 class concrete repair mortar that sets in 40 minutes and can be painted after 4 hours. With Geolite 40, you can remove, repair, and seal the surface in one day — no need to return the next day. The fast-setting material is suitable for medium and large surface jobs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take to set, and when can it be painted?\u003c\/strong\u003e\u003cbr\u003eThe setting time of Geolite 40 at +21 °C is approximately 40 minutes, and it can be loaded and painted after 4 hours. It sets slower in cold conditions: at +5 °C about 180–195 minutes. It sets faster in warm conditions — at +30 °C about 25–30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the R4 class mean for concrete repair mortar?\u003c\/strong\u003e\u003cbr\u003eR4 is the highest structural repair mortar class according to EN 1504-3. Suitable for restoring high-strength, load-bearing structures — Geolite 40 has a 28-day compressive strength \u0026gt; 45 N\/mm². R3 and R2 are weaker, for non-structural repairs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeolite, Geolite 40, or Geolite 10 — which one do I need?\u003c\/strong\u003e\u003cbr\u003eAll three are R4 thixotropic concrete repair mortars, only the setting time differs. Geolite 40 is semi-fast (40 minutes) — comfortable application and same-day handover. \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e is fast (10 minutes), for fixing and cold conditions. \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e is normal (80 minutes), for large areas and machine application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the concrete repair paintable and waterproof?\u003c\/strong\u003e\u003cbr\u003eGeolite 40 is waterproof, and the repair can be painted after 4 hours. It can be used outdoors on structures exposed to precipitation. For breathable protection against carbonation, apply \u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed under the concrete repair mortar?\u003c\/strong\u003e\u003cbr\u003eNot on vertical, healthy concrete — just wet the surface until saturated. On horizontal concrete surfaces, \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate preparation is recommended for proper absorption. The substrate must always be clean, solid, and rough.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many m² does a 25 kg bag cover?\u003c\/strong\u003e\u003cbr\u003eMaterial requirement ≈ 17 kg\/m² per centimeter. For 10 mm repairs, a 25 kg bag covers ≈ 1.5 m²; for 20 mm, ≈ 0.7 m². Thicker layers should be applied in multiple passes, max. 40 mm per layer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this concrete repair?\u003c\/strong\u003e\u003cbr\u003eFor quick setting within minutes (fast fixing), use \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e; for long, calm application over large areas, use \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e. Do not apply on contaminated, loose, dusty substrates, gypsum, metal, wood, or frozen surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eSmall, surface concrete repairs can be done by an experienced hand: demolition, cleaning, wetting, application. Structural restoration requires static knowledge — load-bearing capacity depends on it. We also undertake complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg \/ Normal","offer_id":43323475525890,"sku":"02900","price":17500.0,"currency_code":"HUF","in_stock":true},{"title":"25 kg \/ Expired (-50%)","offer_id":56355754934596,"sku":"02900-exp","price":5250.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-40-geo-habarcsok-betonhoz-38778473283842.jpg?v=1702741863"},{"product_id":"kerakoll-geolite-asfalto","title":"Kerakoll GeoLite Asfalto","description":"\u003cp\u003e\u003cstrong\u003eThis product is being phased out and re-marketed as \u003ca href=\"\/en\/products\/kerakoll-metric-track\"\u003eKerakoll Metric Track\u003c\/a\u003e .\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Geo‑mortar based on mineral origin, geo‑binder, for the restoration of roads.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e Kerakoll Geolite Asfalto is a black colored geo-mortar, ideal for applications where quick commissioning is required, for example in the restoration of industrial and airport road surfaces, pavements, and for anchoring and fixing sewer covers, manholes, fences, signs, protective barriers.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Wrapping\u003c\/th\u003e\n\n\u003ctd\u003e Bag 25 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Material requirement\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 19 kg\/m \u003csup\u003e2\u003c\/sup\u003e \/cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Storage\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 6 months\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"25 kg \/ Normal","offer_id":43323478573314,"sku":"06884 (old)","price":18450.0,"currency_code":"HUF","in_stock":false},{"title":"25 kg \/ Expired (-50%)","offer_id":56522652385604,"sku":"06884 (old)-exp","price":9225.0,"currency_code":"HUF","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-asfalto-geo-habarcsok-betonhoz-38781509730562.jpg?v=1702741866"},{"product_id":"kerakoll-geolite-base","title":"Kerakoll GeoLite Base","description":"\u003cp\u003e\u003cstrong\u003eThe product has been discontinued; instead, the \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003eKerakoll Primer Uni\u003c\/a\u003e product is available.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSubstrate preparation for horizontal concrete surfaces.\u003c\/p\u003e\n\u003cp\u003eKerakoll Geolite Base is especially suitable for substrate preparation when monolithic filling of slabs, floors, and horizontal concrete structures. It regulates the base's water absorption, allowing the correct and natural application and monolithic adhesion of the geo-mortar to the lower layer.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e5 kg can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 0.2 – 0.5 kg\/m\u003csup\u003e2\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"5kg \/ Normal","offer_id":43323483619586,"sku":"13117-exp","price":9240.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-base-geo-habarcsok-betonhoz-38778533708034.jpg?v=1702741868"},{"product_id":"kerakoll-geolite-gel","title":"Kerakoll Geolite Gel two-component epoxy adhesive for structural reinforcement","description":"\u003cp\u003eAre you bonding steel fabric reinforcement to reinforced concrete or anchoring rods? Ordinary adhesives slip in heat and do not penetrate pores. Geolite Gel is a two-component, thixotropic epoxy: it stays in place overhead, is workable in heat, and adheres to all substrates. This is the adhesive and anchoring material of the Kerakoll Geosteel SRP structural reinforcement system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet impregnation of steel fabric reinforcement:\u003c\/strong\u003e two-component thixotropic epoxy — embeds the \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e fabric and bonds it to the substrate (SRP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart of the system:\u003c\/strong\u003e the Kerakoll \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel SRP\u003c\/a\u003e certified structural reinforcement system adhesive and matrix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision anchoring of rods and steel plates:\u003c\/strong\u003e pressed into holes or applied with a putty knife — excellent adhesion on all substrates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not melt in heat:\u003c\/strong\u003e thixotropic, workable at high temperatures — stays in place overhead and on vertical surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains shape under load:\u003c\/strong\u003e high Tg (glass transition temperature) — the bond remains solid even in heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not spread flame:\u003c\/strong\u003e C-s2, d0 fire resistance Euroclass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack repair preparation:\u003c\/strong\u003e surface filling before Epofill injection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessories required for the complete system:\u003c\/strong\u003e not reinforcement by itself — the \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e fabric and the prepared substrate form the complete SRP system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTwo-component thixotropic epoxy adhesive (structural)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eEpoxy, 2-component (“A” gray + “B” beige paste)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eFire resistance C-s2, d0; high Tg glass transition temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eGeosteel SRP — steel fabric impregnation, anchoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eStock 6.66 kg (A + B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months (protected from frost and sunlight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing reinforced concrete and concrete. Irregularities over 10 mm must be leveled first with \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e geo-mortar; gaps wider than 0.5 mm must be sealed with Epofill injection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Structural bonding of steel plates to coated concrete; anchoring rods into reinforced concrete elements; wet impregnation of \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e steel fabrics in the certified Geosteel SRP reinforcement system; surface filling of cracks before Epofill injection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e standalone reinforcement (the \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e fabric alone is not a complete system); contaminated, greasy, dusty, or flaky surfaces; leveling large surface irregularities (use \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e geo-mortar for that).\u003c\/p\u003e\n\u003ch3\u003eThe Geosteel SRP reinforcement system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Substrate preparation\u003c\/th\u003e\n\u003ctd\u003ehealthy concrete + \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e leveling — compact, rough, clean substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Adhesive \/ matrix\u003c\/th\u003e\n\u003ctd\u003eGeolite Gel — this product, first layer + fabric impregnation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Reinforcement fabric\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G600\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geosteel-g1200\"\u003eG1200\u003c\/a\u003e — galvanized steel fabric, the load-bearing element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eMineral (SRG) or epoxy (SRP) matrix?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMineral, breathable, fire-resistant (A1) matrix:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e geo-mortar + Geosteel G — the Geosteel SRG system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy, high-adhesion, wet impregnating matrix:\u003c\/strong\u003e Geolite Gel + Geosteel G — this product, the Geosteel SRP system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat adhesive is used for steel fabric reinforcement on reinforced concrete?\u003c\/strong\u003e\u003cbr\u003eA two-component, thixotropic epoxy adhesive that embeds the fabric and bonds it to the substrate. Geolite Gel impregnates the \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e steel fabric in the certified Geosteel SRP system. It stays in place overhead and in heat, adhering to all substrates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Geosteel SRG and SRP systems?\u003c\/strong\u003e\u003cbr\u003eBoth use the same \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e steel fabric but have different matrices. The SRG uses a mineral geo-mortar matrix (\u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e) — breathable, fire-resistant. The SRP uses an epoxy matrix (Geolite Gel) — high-adhesion, wet impregnating. The designer chooses based on the structure and environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Geolite Gel available separately?\u003c\/strong\u003e\u003cbr\u003eYes, it can be purchased separately — if you already have the \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e fabric and prepared substrate, or if you need it for rod and plate anchoring. However, by itself, it is not reinforcement: the load-bearing capacity comes from the fabric. It can be used independently for anchoring and bonding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is thixotropic epoxy, and why is it good?\u003c\/strong\u003e\u003cbr\u003eThixotropic epoxy does not flow: it stays in place on vertical surfaces and overhead. Thus, Geolite Gel can be applied on ceilings and beams without dripping. It is also easy to work with at high temperatures, which is an advantage in hot summer conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a high Tg mean?\u003c\/strong\u003e\u003cbr\u003eTg is the glass transition temperature — the temperature above which the epoxy softens. A high Tg means that Geolite Gel remains solid and load-bearing even in heat. This is an important safety factor in structural reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs substrate preparation necessary under the epoxy adhesive?\u003c\/strong\u003e\u003cbr\u003eYes — a clean, solid, roughened surface is required. Level out irregularities greater than 10 mm first with \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e geo-mortar, and seal gaps wider than 0.5 mm with Epofill injection. Remove grease, dust, and dirt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this adhesive?\u003c\/strong\u003e\u003cbr\u003eDo not use \u003ca href=\"\/en\/products\/kerakoll-geosteel-g600\"\u003eGeosteel G\u003c\/a\u003e without fabric as standalone reinforcement — it is not a complete system. It is also not suitable for leveling large surface irregularities (for that, use \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e geo-mortar). Do not apply on contaminated, greasy, or crumbling surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eNo — structural reinforcement requires static design and certified execution: sizing the system, professional embedding of the fabric, and substrate preparation. Load-bearing capacity depends on it. We undertake the complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"6.66 kg","offer_id":43533538722050,"sku":"47044, 47045","price":70500.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-gel-5_166-ragaszto-vasbeton-SRP-monolit-megerositesehez_1.jpg?v=1745979323"},{"product_id":"kerakoll-steel-fiber","title":"Kerakoll Steel Fiber","description":"\u003cp\u003eSteel fiber can be molded to produce extremely high-strength hard concretes and mortars.\u003c\/p\u003e\n\n\u003cp\u003e Kerakoll Steel Fiber is a steel fiber made from cold-drawn steel wire with high resistance and high carbon content. They comply with the MSZ EN 14889‑1 standard for steel fibers for structural use.\u003c\/p\u003e\n\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Wrapping\u003c\/th\u003e\n\n\u003ctd\u003e box 6.5 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Material requirement\u003c\/th\u003e\n\n\u003ctd\u003e for every 4 bags of \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-xenon\"\u003eGeoLite Magma Xenon\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeoLite Magma\u003c\/a\u003e 1 package of Steel Fiber (6.5% of the powder weight)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Storage\u003c\/th\u003e\n\n\u003ctd\u003e for unlimited time\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"Default Title","offer_id":42763027022082,"sku":"17019","price":65850.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-steel-fiber-geo-habarcsok-betonhoz-37278676222210.jpg?v=1702750871"},{"product_id":"kerakoll-kerabuild-eco-steel-p","title":"Kerakoll Kerabuild Eco Steel P","description":"\u003ch4\u003eThis product is being discontinued and replaced by \u003ca href=\"https:\/\/www.masterworks.hu\/products\/kerakoll-metric-rebar\"\u003eMetric Rebar\u003c\/a\u003e.\u003c\/h4\u003e\u003cp\u003eEco-compatible mineral mortar for active and passive corrosion protection of reinforcing steel. Ideal for GreenBuilding. Contains recycled raw materials and can be recycled as inert waste.\u003c\/p\u003e\n\u003cp\u003eKerakoll Kerabuild Eco Steel P is a one-component, polymer-modified, thixotropic, brush-applied mortar that meets the performance requirements of EN 1504‑7.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e5 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 150 g\/m (reinforcing steel Ø 10 mm and 1.5 mm layer thickness of Kerabuild Eco Steel P)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"5kg","offer_id":43323203256578,"sku":"03852","price":15800.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-kerabuild-eco-steel-p-geo-habarcsok-betonhoz-37278686970114.jpg?v=1702748361"},{"product_id":"kerakoll-kerabuild-eco-fix","title":"Kerakoll Kerabuild Eco Fix","description":"\u003cp\u003e\u003cstrong\u003eThis product is being phased out and re-marketed as \u003ca href=\"\/en\/products\/kerakoll-metric-r2-fix\"\u003eKerakoll Metric R2 Fix\u003c\/a\u003e .\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Eco-compatible mortar of mineral origin for improving the earthquake resistance of buildings, ideal for GreenBuilding. It can be recycled as inert waste with low CO2 emissions.\u003c\/p\u003e\n\n\u003cp\u003e Kerakoll Kerabuild Eco Fix is ​​a modified polymer, highly flexible thixotropic Zero Crack Risk mortar. When used together with ARV 100 reinforcing mesh, it is particularly suitable for earthquake-resistant strengthening of reinforced concrete and masonry structures.\u003c\/p\u003e\n\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Wrapping\u003c\/th\u003e\n\n\u003ctd\u003e Bag 25 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Material requirement\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 15 kg\/m \u003csup\u003e2\u003c\/sup\u003e \/cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Storage\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 12 months\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"25 kg","offer_id":43323198341378,"sku":"03764","price":25900.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-kerabuild-eco-fix-geo-habarcsok-betonhoz-37278693294338.jpg?v=1702748355"},{"product_id":"kerakoll-kerabuild-ghiaia","title":"Kerakoll Ghiaia 3.6 washed aggregate gravel for cast geo-mortars (3–6 mm)","description":"\u003cp\u003eA pour thicker than 60 mm? At that point, you need fine concrete rather than mortar. Gravel makes it fine concrete: washed, graded, 3–6 mm. This is Kerakoll Ghiaia 3.6, the aggregate gravel for Geolite and Metric poured mortars, as well as Geocalce lime screed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer thickness over 60 mm:\u003c\/strong\u003e 25–40% gravel by weight relative to the powder — the aggregate skeleton is adjusted to the pouring thickness, reducing the heat of hydration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart of the system:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e, \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eGeolite Magma 20\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kerakoll-metric-track\"\u003eMetric Track\u003c\/a\u003e poured mortars — the manufacturer prescribes aggregate gravel for these products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLime screed and concrete subfloor:\u003c\/strong\u003e 100 kg \u003ca href=\"\/en\/products\/kerakoll-geocalce-g-antisismico\"\u003eGeocalce G Antisismico\u003c\/a\u003e + 25 kg Ghiaia 3.6 + 13 l of water — factory formula, applied using a compactor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete mixer, pump mixer:\u003c\/strong\u003e excellent mixability — can be worked without difficulty until a homogeneous mix is obtained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not let it separate from old concrete:\u003c\/strong\u003e excellent adhesion to hydraulic binders — washed, graded gravel, free of impurities, is added to the mix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge pours, pallet quantities:\u003c\/strong\u003e 25 kg bag, 1,500 kg\/pallet (60 bags) — unlimited storage life, the remainder does not expire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not build on its own:\u003c\/strong\u003e without a binder, it is only gravel — together with \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-geocalce-g-antisismico\"\u003eGeocalce G Antisismico\u003c\/a\u003e powder, it produces fine concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWashed, graded aggregate gravel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003ctd\u003eFor mortar and fine concrete according to EN 12620 · EN 1504-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAggregate size\u003c\/th\u003e\n\u003ctd\u003e3–6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing ratio\u003c\/th\u003e\n\u003ctd\u003e25–40% by weight relative to the powder (25–40 kg \/ 100 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eFor an unlimited period, in the original bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n\u003cbr\u003eWhat is it suitable for?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKerakoll poured mortars in thick layers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeolite Magma, Geolite Magma 20, Metric Track — for layer thicknesses over 60 mm, mixed in at 25–40% by weight\u003c\/li\u003e\n\u003cli\u003eGeocalce G Antisismico — screed and concrete mix according to the manufacturer's formula (100 kg + 25 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFilling of industrial floors and smooth concrete surfaces between 60–100 mm, deep cross-section restoration\u003c\/li\u003e\n\u003cli\u003eLime screed, structural subfloor, substrate for bonded coverings, road and concrete surface repairs\u003c\/li\u003e\n\u003cli\u003eFlowable and self-compacting fine concrete according to EN 1504-3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs a standalone material, without a binder — not a ready-to-use product and not a surface suitable for covering\u003c\/li\u003e\n\u003cli\u003eFor layer thicknesses under 60 mm — the data sheet prescribes gravel only above this thickness\u003c\/li\u003e\n\u003cli\u003eFor plaster, tile adhesive and floor levelling compound where the TDS does not prescribe it\u003c\/li\u003e\n\u003cli\u003eFor a 6–10 mm aggregate skeleton — the former Kerabuild Ghiaia range cannot be replaced with this product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGeolite \/ Geocalce system — mixing ratios\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003cth\u003ePowder\u003c\/th\u003e\n\u003cth\u003eGhiaia 3.6\u003c\/th\u003e\n\u003cth\u003eWater\u003c\/th\u003e\n\u003cth\u003eWhat does it provide?\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kg\u003c\/td\u003e\n\u003ctd\u003e25 – 40 kg\u003c\/td\u003e\n\u003ctd\u003eaccording to the technical data sheet\u003c\/td\u003e\n\u003ctd\u003eFor pouring fine concrete in layers over 60 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eGeolite Magma 20\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kg\u003c\/td\u003e\n\u003ctd\u003e25 – 40 kg\u003c\/td\u003e\n\u003ctd\u003eaccording to the technical data sheet\u003c\/td\u003e\n\u003ctd\u003eFor anchoring fine concrete in thick layers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-metric-track\"\u003eMetric Track\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kg\u003c\/td\u003e\n\u003ctd\u003e25 – 40 kg\u003c\/td\u003e\n\u003ctd\u003eaccording to the technical data sheet\u003c\/td\u003e\n\u003ctd\u003eFine concrete for repairing road surfaces and concrete surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-geocalce-g-antisismico\"\u003eGeocalce G Antisismico\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kg (4 bags)\u003c\/td\u003e\n\u003ctd\u003e25 kg (1 bag)\u003c\/td\u003e\n\u003ctd\u003e13 l\u003c\/td\u003e\n\u003ctd\u003eLime screed - with a compactor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-geocalce-g-antisismico\"\u003eGeocalce G Antisismico\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kg (4 bags)\u003c\/td\u003e\n\u003ctd\u003e25 kg (1 bag)\u003c\/td\u003e\n\u003ctd\u003e15 l\u003c\/td\u003e\n\u003ctd\u003eConcrete-consistency mix - with a vibrator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThe amount of water for Geolite and Metric products must be dosed according to the value indicated on the respective bag and technical data sheet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cbr\u003eWhat should be done when pouring a layer thicker than 60 mm?\u003c\/h3\u003e\n\u003cp\u003eGravel must be mixed into the mortar. Add 25–40% aggregate gravel by weight to the cast mortars \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kerakoll-metric-track\"\u003eMetric Track\u003c\/a\u003e. This produces fine concrete with lower heat of hydration.\u003c\/p\u003e\n\u003ch3\u003eWhich gravel is needed for concrete repair mortar?\u003c\/h3\u003e\n\u003cp\u003eWashed, graded 3–6 mm gravel, in accordance with EN 12620. Kerakoll specifies Ghiaia 3.6 for this purpose. Washed, graded material provides a known particle size distribution - this is the essence of EN 12620.\u003c\/p\u003e\n\u003ch3\u003eHow much gravel is needed for 100 kg of mortar?\u003c\/h3\u003e\n\u003cp\u003e25–40 kg, or 1–1.6 bags. The technical data sheets for \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e, \u003ca href=\"\/en\/products\/kerakoll-geolite-magma-20\"\u003eGeolite Magma 20\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kerakoll-metric-track\"\u003eMetric Track\u003c\/a\u003e all specify 25–40% by weight. The exact ratio depends on the layer thickness.\u003c\/p\u003e\n\u003ch3\u003eHow is a lime screed made with Geocalce?\u003c\/h3\u003e\n\u003cp\u003e100 kg \u003ca href=\"\/en\/products\/kerakoll-geocalce-g-antisismico\"\u003eGeocalce G Antisismico\u003c\/a\u003e + 25 kg aggregate gravel + 13 l water. This is the manufacturer's screed recipe and can be installed using a compactor. For a concrete-consistency mix, use 15 l of water and a vibrator.\u003c\/p\u003e\n\u003ch3\u003eWhat does EN 12620 mean?\u003c\/h3\u003e\n\u003cp\u003eEN 12620 is the European standard for aggregates used in concrete. It specifies particle size distribution, cleanliness and durability. Ghiaia 3.6 is washed gravel that complies with it.\u003c\/p\u003e\n\u003ch3\u003eWhen is aggregate gravel NOT needed in the mortar?\u003c\/h3\u003e\n\u003cp\u003eNot for layer thicknesses under 60 mm. The technical data sheet requires gravel only for layers over 60 mm. It is also not suitable for plaster, adhesive or screed levelling compounds.\u003c\/p\u003e\n\u003ch3\u003eCan it be purchased separately?\u003c\/h3\u003e\n\u003cp\u003eYes, it can also be ordered separately in bags. It is useful when the mortar is already available or when gravel needs to be added afterwards due to a thicker layer. Packaging: 25 kg bag, 60 bags per pallet.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it myself?\u003c\/h3\u003e\n\u003cp\u003eYes, in a concrete mixer or a pump mixer. Mix until homogeneous, following the manufacturer's ratios. The product is intended for professionals - we also undertake the installation for larger pours.\u003c\/p\u003e\n\u003ch3\u003eIs it the same as the old Kerabuild Ghiaia?\u003c\/h3\u003e\n\u003cp\u003eNo. Kerabuild Ghiaia was 6–10 mm gravel, while Ghiaia 3.6 has a 3–6 mm particle size distribution. The finer aggregate was designed for the cast mortars \u003ca href=\"\/en\/products\/kerakoll-geolite-magma\"\u003eGeolite Magma\u003c\/a\u003e and \u003ca href=\"\/en\/products\/kerakoll-metric-track\"\u003eMetric Track\u003c\/a\u003e, as well as the \u003ca href=\"\/en\/products\/kerakoll-geocalce-g-antisismico\"\u003eGeocalce G Antisismico\u003c\/a\u003e screed mix.\u003c\/p\u003e\n\u003ch3\u003eHow long can it be stored?\u003c\/h3\u003e\n\u003cp\u003eFor an unlimited period in the original bag. The gravel does not set or expire. Any unopened bags can be used on the next project.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"25 kg","offer_id":43323209711874,"sku":"49382","price":4600.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/Kerakoll_Ghiaia_3.6_mosott_adalekkavics_ontott_geo-habarcsokhoz_1.jpg?v=1789829531"},{"product_id":"kerakoll-kerabuild-eco-osmocem","title":"Kerakoll Kerabuild Eco Osmocem","description":"\u003cp\u003e \u003cstrong\u003eThis product is being phased out and re-marketed as \u003ca href=\"\/en\/products\/kerakoll-metric-osmotic\"\u003eKerakoll Metric Osmotic\u003c\/a\u003e .\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eEco-compatible mineral coating with osmotic effect for guaranteed long-term protection and waterproofing of concrete structures, ideal for GreenBuilding. It can be recycled as inert waste.\u003c\/p\u003e\n\n\u003cp\u003e Kerakoll Kerabuild Eco Osmocem is a thixotropic, one-component coating that complies with EN 1504‑2, coating [C] performance requirements (layer-forming coating materials), resistant to positive and negative water pressure.\u003c\/p\u003e\n\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Wrapping\u003c\/th\u003e\n\n\u003ctd\u003e Bag 25 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Material requirement\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 1.5 kg\/m \u003csup\u003e2\u003c\/sup\u003e \/mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Storage\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 12 months\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"25 KG","offer_id":47210750312772,"sku":"11373","price":22950.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-kerabuild-eco-osmocem-geo-habarcsok-betonhoz-37363609633026.jpg?v=1702748358"},{"product_id":"kerakoll-kerabuild-eco-ultracem","title":"Kerakoll Kerabuild Eco Ultracem","description":"\u003cp\u003e \u003cstrong\u003eThis product is being phased out and re-marketed as \u003ca href=\"\/en\/products\/kerakoll-metric-ultracem\" data-mce-href=\"\/en\/products\/kerakoll-metric-ultracem\"\u003eKerakoll Metric Ultracem\u003c\/a\u003e .\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Eco-compatible waterproofing mortar, ultra-fast setting and solidification, ideal for GreenBuilding. It can be recycled as inert waste.\u003c\/p\u003e\n\n \u003cp\u003eKerakoll Kerabuild Eco Ultracem is a special mortar for the immediate stopping of localized or extensive water leaks on foundations, lift shafts, garages, underground rooms, retaining walls, pools, irrigation canals, sewage canals, tanks, drinking water collectors and reservoirs, tunnels and bridges.\u003c\/p\u003e\n\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Wrapping\u003c\/th\u003e\n\n\u003ctd\u003e Bag 5 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Material requirement\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 1.6 kg\/dm \u003csup\u003e3\u003c\/sup\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e Storage\u003c\/th\u003e\n\n\u003ctd\u003e ≈ 6 months\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e","brand":"Kerakoll","offers":[{"title":"5kg","offer_id":43323206238466,"sku":"10185","price":7400.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-kerabuild-eco-ultracem-geo-habarcsok-betonhoz-37363630637314.jpg?v=1702748538"},{"product_id":"kerakoll-geolite-silt","title":"Kerakoll Geolite Silt lightweight finishing geo-mortar for concrete (2–50 mm)","description":"\u003cp\u003eIs the concrete surface ugly, gravelly, or full of holes before painting? Structural repair mortar is strong but hard to smooth and expensive on large surfaces. Geolite Silt is a lightweight, high-yield smoothing mortar: creamy spreadable, smooth surface from 2–50 mm. Paintable after 4 hours. This is Kerakoll Geolite Silt.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeolite is the first geo-mortar for repairing damaged reinforced concrete: Kerakoll geo-binder, with near-zero shrinkage and high chemical resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoothing gravel nests, holes, uneven fair-faced concrete:\u003c\/strong\u003e lightweight geo-mortar — creamy spreadable, smooth, paintable surface from 2–50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge surface economically:\u003c\/strong\u003e high yield, ≈ 12 kg\/m²\/cm — less material than structural mortar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack-prone, moving substrate:\u003c\/strong\u003e low modulus of elasticity (13 GPa) — moves with the concrete, R2 class\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast further processing:\u003c\/strong\u003e semi-fast, ≈ 30 minutes setting, paintable after 4 hours — work progresses the same day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair of junctions between new and old concrete, cornices, window sills:\u003c\/strong\u003e fills and levels surface defects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not drip even overhead or vertically:\u003c\/strong\u003e thixotropic — works on ceilings and beams\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreathable, non-combustible surface:\u003c\/strong\u003e A1 fire resistance, vapor permeable (Class I) — mineral, geo-binder based\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eLightweight, non-structural smoothing geo-mortar (indoor and outdoor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBinder\u003c\/th\u003e\n\u003ctd\u003eMineral geo-binder, inorganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003ctd\u003eR2 class (EN 1504-3); compressive strength after 28 days \u003e 15 N\/mm² · paintable after 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003emin. 2 mm – max. 50 mm \/ layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting time\u003c\/th\u003e\n\u003ctd\u003esemi-fast, ≈ 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003e≈ 12 kg\/m²\/cm; 15 kg ≈ 1.25 m² (10 mm layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e15 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e≈ 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Healthy, load-bearing concrete and reinforced concrete — indoors and outdoors. Worn, uneven, gravel-nested concrete surfaces. Concrete repaired with the Geolite family’s geo-mortars before painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e Local and general protective smoothing of concrete surfaces; non-structural restoration of worn concrete parts; filling and leveling surface defects (junctions of new and old concrete, gravel nests, holes); repair of decorative elements — cornices, window sills, parapets. On horizontal concrete after \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e load-bearing, structural repairs (use R4 \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003e10\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e for that); contaminated, loose, crumbling, or dusty substrates; gypsum, metal, wood; surfaces below +5 °C, above +40 °C, or frozen.\u003c\/p\u003e\n\u003ch3\u003eThe Geolite concrete repair system\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e1. Structural repair\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003e10\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e — R4 volume restoration, load-bearing capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2. Smoothing\u003c\/th\u003e\n\u003ctd\u003eGeolite Silt — this product provides a lightweight, smooth, paintable surface, 2–50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3. Protective topcoat paint\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable, carbonation-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eStructural repair or smoothing needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad-bearing, structural repair (R4):\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003eGeolite 40\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003eGeolite 10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth, aesthetic, non-structural surface (R2):\u003c\/strong\u003e Geolite Silt — this product, highly economical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbonation-resistant finish:\u003c\/strong\u003e \u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e — breathable paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to create a smooth, paintable surface on rough, gravelly concrete?\u003c\/strong\u003e\u003cbr\u003eLightweight, non-structural smoothing geo-mortar that is creamy and paintable after 4 hours. Geolite Silt fills gravel nests, holes, and unevenness from 2–50 mm. First repair structural defects with R4 mortar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between structural and smoothing repair mortar?\u003c\/strong\u003e\u003cbr\u003eStructural mortar (R4, e.g. \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e) restores load-bearing capacity; smoothing mortar (R2, Geolite Silt) provides an aesthetic, smooth surface. Silt is lighter, more economical, and easier to apply but not load-bearing. They are often used consecutively.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the R2 class mean?\u003c\/strong\u003e\u003cbr\u003eR2 is the EN 1504-3 non-structural repair mortar class. It has lower strength (28 days \u003e 15 N\/mm²), suitable for surface, aesthetic repairs — not for load-bearing structures. For load-bearing, R4 class \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many m² does a 15 kg bag cover?\u003c\/strong\u003e\u003cbr\u003eMaterial requirement ≈ 12 kg\/m² per centimeter — low due to the lightweight composition. For a 10 mm layer, a 15 kg bag covers ≈ 1.25 m², for 5 mm ≈ 2.5 m². Therefore economical for large surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can the smoothed surface be painted?\u003c\/strong\u003e\u003cbr\u003eGeolite Silt can be painted after 4 hours. For breathable, carbonation-resistant protection, \u003ca href=\"\/en\/products\/kerakoll-geolite-microsilicato\"\u003eGeolite MicroSilicato\u003c\/a\u003e paint can be applied. The surface must be dry and stable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick can it be applied?\u003c\/strong\u003e\u003cbr\u003eBetween 2 and 50 mm in a single layer. For thin smoothing from 2 mm, for deeper defect filling up to 50 mm. For thicker, load-bearing repairs, use structural \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a primer needed under the smoothing mortar?\u003c\/strong\u003e\u003cbr\u003eFor horizontal concrete surfaces, \u003ca href=\"\/en\/products\/kerakoll-primer-uni\"\u003ePrimer Uni\u003c\/a\u003e substrate primer is recommended for proper absorption. The substrate must be clean, solid, and rough. Wet thoroughly before application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I NOT use this smoothing mortar?\u003c\/strong\u003e\u003cbr\u003eDo not use for load-bearing, structural repairs — for that, use R4 \u003ca href=\"\/en\/products\/kerakoll-geolite\"\u003eGeolite\u003c\/a\u003e, \u003ca href=\"\/en\/products\/kerakoll-geolite-10\"\u003e10\u003c\/a\u003e, or \u003ca href=\"\/en\/products\/kerakoll-geolite-40\"\u003e40\u003c\/a\u003e. Do not apply on dirty, loose, dusty substrates, gypsum, metal, wood, or frozen surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it myself?\u003c\/strong\u003e\u003cbr\u003eYes, smoothing can be done by a skilled hand: cleaning, wetting, applying with a trowel, then smoothing with a sponge float. However, large surfaces, facades, or structural repairs require expertise. We also undertake complete execution.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"15 kg \/ Normal","offer_id":43533469221122,"sku":"47064","price":9650.0,"currency_code":"HUF","in_stock":true},{"title":"15 kg \/ Expired (-50%)","offer_id":54903467573572,"sku":"47064-exp","price":4825.0,"currency_code":"HUF","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-geolite-silt-geo-habarcsok-betonhoz-38778221986050.jpg?v=1702742418"}],"url":"https:\/\/www.masterworks.hu\/en\/collections\/geo-habarcsok-betonhoz.oembed","provider":"Masterworks Hungary","version":"1.0","type":"link"}