{"title":"Parquet Resin Coating","description":"\u003cp\u003eParquet resin coating is a liquid resin-based surface treatment system that can be applied to wooden floors, offering significantly different aesthetic and performance characteristics compared to traditional varnish or oil. It can also be applied on existing parquet without replacement or demolition — one of the system's most practical advantages.\u003c\/p\u003e\n\u003ch3\u003eWhat is parquet resin coating?\u003c\/h3\u003e\n\u003cp\u003eParquet resin coating is a reactive resin-based paint for wooden floors: a liquid consistency system that can be applied with a roller or spatula, which, after curing, forms a silky, wear-resistant, joint-free surface over the wood. It does not cover the natural grain and texture of the wood — in transparent or slightly tinted versions, the wood remains visible beneath, but covered with a uniform, continuous coating.\u003c\/p\u003e\n\u003ch3\u003eHow is it different from varnish or oil?\u003c\/h3\u003e\n\u003cp\u003eParquet varnish forms a hard film layer that can scratch and requires sanding of the entire surface if damaged. Oil protects from within but requires regular maintenance and care. Resin coating is between the two: it provides stronger mechanical protection than oil but is more flexible and less prone to scratching than traditional varnish. Additionally, it is joint-free, which means an aesthetically uniform surface.\u003c\/p\u003e\n\u003ch3\u003eCan be applied without demolition\u003c\/h3\u003e\n\u003cp\u003eOn existing, solid, dry, and properly prepared parquet, resin coating can be applied without replacing the parquet. After sanding the surface, filling gaps, and applying the appropriate primer, the system is built on the existing parquet. This is especially valuable for older parquet where the original wood quality is good but the surface is worn.\u003c\/p\u003e\n\u003ch3\u003eCompatible with underfloor heating\u003c\/h3\u003e\n\u003cp\u003eParquet resin coating is also available in versions compatible with underfloor heating systems. Underfloor heating subjects the substrate to temperature cycles that stress the coating's flexibility — compatibility is detailed in the manufacturer's datasheet and must be checked before application.\u003c\/p\u003e\n\u003ch3\u003eWhat to consider during application?\u003c\/h3\u003e\n\u003cp\u003eApplying resin coating is a professional task. Compatibility with the primer, accuracy of mixing ratios, and adherence to processing times are mandatory. The wood's moisture content must be measured before application — high wood moisture content can cause bubbles and adhesion failures.\u003c\/p\u003e\n\u003cp\u003eBrowse our parquet resin coating products or request advice to assemble a system suited to the condition of your wooden floor and the demands of the space.\u003c\/p\u003e","products":[{"product_id":"kerakoll-legno-nat","title":"Kerakoll Legno Nat","description":"\u003cp\u003eOak is oak. Not gray, not white — but its own color. Lacquering yellows. Waxing wears off. Legno Nat protects the wood floor, and the color stays exactly as it was. This is Kerakoll Legno Nat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wood’s color stays as it is: Legno Nat Base’s water-based formula does not yellow, deepen, or distort — the oak’s natural tone and grain remain visible after the topcoat\u003c\/li\u003e\n\u003cli\u003eWorks on existing parquet too: can be applied on traditional, pre-sanded, and floors to be renovated — no new floor needed, just good surface treatment\u003c\/li\u003e\n\u003cli\u003eDesigned for Legno+Color flooring: system developed for Kerakoll Legno Large, Medium, Small tiles — recommended finishing cycle for Kerakoll’s own tiles\u003c\/li\u003e\n\u003cli\u003eScratch-resistant surface even in high-traffic areas: Microresina Xtreme shows \u003c 18 mg wear in Taber test — the same level expected for commercial floors\u003c\/li\u003e\n\u003cli\u003eFor restaurants, offices, public institutions too: HACCP certified topcoat, slip-resistant (R9) — approved for food industry environments\u003c\/li\u003e\n\u003cli\u003eSafe around children: EN 71-3 toy safety standard, heavy metal free, water-based, low VOC emissions\u003c\/li\u003e\n\u003cli\u003eReady in 3 days: Legno Nat Base + 3 layers of Microresina Xtreme — system execution time ~3 working days\u003c\/li\u003e\n\u003cli\u003eIf color is needed: the same floor is also available in 150 Piero Lissoni shades with the Microresina Parquet system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eLegno Nat Base + Microresina Xtreme\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage\u003c\/th\u003e\n\u003ctd\u003e2 products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial requirement\u003c\/th\u003e\n\u003ctd\u003eBase: ~100 ml\/m²\u003cbr\u003eXtreme: ~80 ml\/m² × 3 layers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExecution time\u003c\/th\u003e\n\u003ctd\u003e~3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eMatte, natural wood effect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eItems of 5 m², minimum 10 m², under 10 m² +30% surcharge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eWhat is it suitable for?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSpaces (indoor only):\u003c\/strong\u003e Living room, bedroom, hallway, office, restaurant, café, public institution\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKerakoll Legno Large, Legno Medium, Legno Small tiles\u003c\/li\u003e\n\u003cli\u003eTraditional, sanded oak floors\u003c\/li\u003e\n\u003cli\u003ePre-sanded oak floors\u003c\/li\u003e\n\u003cli\u003eOak floors to be renovated (after removing existing coating)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor outdoor use\u003c\/li\u003e\n\u003cli\u003eFor surfaces in permanent contact with water\u003c\/li\u003e\n\u003cli\u003eFor traditional wood floors other than oak\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem structure\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer\u003c\/th\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003cth\u003eWaiting\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003eLegno S, M, L \/ oak flooring\u003c\/td\u003e\n\u003ctd\u003e--\u003c\/td\u003e\n\u003ctd\u003esanding + vacuuming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-legno-nat-base\"\u003eLegno Nat Base\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e~100 ml\/m²\u003c\/td\u003e\n\u003ctd\u003e~4 hours, then SoftPad sanding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-design-microresina-xtreme\"\u003eMicroresina Xtreme\u003c\/a\u003e (3x)\u003c\/td\u003e\n\u003ctd\u003e~70–80 ml\/m²\/layer\u003c\/td\u003e\n\u003ctd\u003e2–3 hours between layers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTotal time:\u003c\/strong\u003e ~3 days.\u003cbr\u003e\u003cstrong\u003eReady for use:\u003c\/strong\u003e 2–4 days (light), 7–10 days (heavy traffic)\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be applied to existing oak floors?\u003c\/strong\u003e \u003cbr\u003eYes — suitable for traditional, pre-sanded, and renovation oak floors alike. The floor must be sanded and cleaned of previous coatings (wax, lacquer, silicone) before application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between parquet lacquer, parquet oil, and Legno Nat?\u003c\/strong\u003e \u003cbr\u003eAll three protect the wood floor — but behave differently in terms of wear and repair:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eParquet lacquer:\u003c\/b\u003e hard film over the wood — durable but requires full sanding when worn\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eParquet oil:\u003c\/b\u003e penetrates the wood — natural feel, local repairs possible, more maintenance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLegno Nat:\u003c\/b\u003e thin resin layer, matte finish — between the two, more wear-resistant than oil, more natural look than lacquer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOak floor treatment: when should I choose Legno Nat?\u003c\/strong\u003e \u003cbr\u003eIf you want to keep the current floor color — use Legno Nat. If you want to give the parquet a new color, the Microresina Parquet system is available in 150 Piero Lissoni shades for the same substrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow durable is the microresin coating on wood floors?\u003c\/strong\u003e \u003cbr\u003eMicroresina Xtreme shows less than 18 mg wear in the Taber test (CS17\/1 kg\/1000 revolutions, ASTM D 4060)—the expected level for commercial floors. Slip-resistant (R9, DIN 51130), HACCP certified, washable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before the treated floor can be walked on?\u003c\/strong\u003e \u003cbr\u003eAfter application, ~2–4 days for light (residential) use, ~7–10 days for heavy (commercial) use before traffic. About 48 hours before mopping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much surface area does the Legno Nat package cover? \u003c\/strong\u003e\u003cbr\u003eFor Legno Large\/Medium\/Small, Legno Nat Base covers about 10 m²\/liter, Microresina Xtreme about 70–80 ml\/m² per layer (3 layers). To calculate the exact amount, please contact us with the area size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the minimum order quantity?\u003c\/strong\u003e\u003cbr\u003eAvailable in 5 m² batches. Orders under 10 m² incur a 30% surcharge.\u003c\/p\u003e\n\u003ch2\u003eKerakoll Color Collection\u003c\/h2\u003e\n\u003cp\u003eThe Color Collection offers \u003ca href=\"\/en\/pages\/color-collection-szinek\"\u003e150 Piero Lissoni colors\u003c\/a\u003e in \u003ca href=\"\/en\/pages\/color-collection-texturak-es-feluletek\"\u003e20 surface types\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003eOne color code covers the wall, floor, ceiling, door, and window frame. Dusty tones make any combination work—uniform shade throughout or a deliberate contrast. The \u003ca href=\"\/en\/collections\/kerakoll-color-fill\"\u003eColor Fill\u003c\/a\u003e completes the system with 50 matching grouts and silicones.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"2.2 L","offer_id":56495621046596,"sku":"08589","price":40000.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/Kerakoll-legno-color-legno-nat-main_1.jpg?v=1773159175"}],"url":"https:\/\/www.masterworks.hu\/en\/collections\/parketta-bevonatok-parketta-gyantabevonat.oembed","provider":"Masterworks Hungary","version":"1.0","type":"link"}