{"product_id":"kerakoll-pragma-flex","title":"Kerakoll Pragma Flex mineral tile adhesive for interior and exterior use","description":"\u003cp\u003eNeed one adhesive for the bathroom, patio and heated floors? If you need a different bag for every room, it’s easy to buy the wrong one. This adhesive works on walls and floors, indoors and out. Tiles won’t slip on walls, and it’s easy to spread. It’s suitable for porcelain stoneware, ceramic and stone. This is Kerakoll Pragma Flex.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePerforms indoors and out: adhesion remains ≥ 1 N\/mm² after heat exposure, water immersion and freeze-thaw cycles — for patios, balconies, swimming pools and fountains\u003c\/li\u003e\n\u003cli\u003eTiles won’t slip on walls: vertical slip is no more than 0.5 mm (C2 TE, EN 12004) — for bathroom and kitchen walls\u003c\/li\u003e\n\u003cli\u003eSuitable for heated floors: bonds to cement screed with underfloor heating; prime first for anhydrite screed — for homes and commercial premises\u003c\/li\u003e\n\u003cli\u003eWork at your own pace: ≥ 30 minutes open time and ≥ 3 hours pot life (+23 °C) — cover a larger area with one mix\u003c\/li\u003e\n\u003cli\u003eMix can be thickened as required: a non-slump (thixotropic) mix can also be prepared; 2–15 mm bed, also suitable for levelling minor unevenness\u003c\/li\u003e\n\u003cli\u003eAlso suitable over existing floor coverings: prime the existing surface with \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-active-prime-grip\"\u003eActive Prime Grip\u003c\/a\u003e — ideal for renovations without demolition\u003c\/li\u003e\n\u003cli\u003eSuitable for a wide range of tiles: porcelain stoneware, ceramic, terracotta, clinker, marble and natural stone, mosaics, interior thermal and acoustic insulation boards\u003c\/li\u003e\n\u003cli\u003eIndoor air-friendly: very low emissions (EC1 Plus, French A+ rating) — for homes and offices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eTile adhesives; mineral tile adhesive for walls and floors (interior and exterior)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eMineral pre-mixed powder, to be mixed with water; white or grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003ctd\u003eC2 TE (EN 12004); ≥ 30 minutes open time (+23 °C); EC1 Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e2–15 mm bed\u003cbr\u003e≈ 2.5–6 kg\/m²\u003cbr\u003e25 kg ≈ 4–10 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Cement screed and mortar, cement render, interior cellular concrete blocks; plasterboard and fibre-reinforced cement board (rigidly fixed to a metal frame); cement-based waterproofing, underfloor heating. After priming with \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-active-prime-grip\"\u003eActive Prime Grip\u003c\/a\u003e: anhydrite screed, gypsum plaster, concrete, existing floor coverings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable coverings:\u003c\/strong\u003e Porcelain stoneware, ceramic, terracotta, clinker, marble and natural stone, mosaics; interior insulation and soundproofing boards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAreas:\u003c\/strong\u003e Walls and floors, indoors and outdoors; homes and shops; terraces and balconies; swimming pools and fountains; street furniture; boats.\u003c\/p\u003e\u003ch3\u003eNot suitable for:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOn wood, metal, plastic or resilient flooring — use \u003ca href=\"\/en\/products\/kerakoll-pragma-duo\"\u003ePragma Duo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eOn deformable or vibration-prone substrates; on smooth precast concrete\u003c\/li\u003e\n\u003cli\u003eOn uncured, shrinking screed, plaster or concrete\u003c\/li\u003e\n\u003cli\u003eOver organic reactive waterproofing\u003c\/li\u003e\n\u003cli\u003eFor deformable or highly absorbent marble and stone prone to staining — use a fast-setting or reactive adhesive\u003c\/li\u003e\n\u003cli\u003eTo fill unevenness greater than 15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Kerakoll tiling system\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLayer\u003c\/th\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eRole\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePerimeter joint\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-tapetex\"\u003eTapetex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eCompressible strip along walls; structural and movement joints must be maintained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePriming — only if needed\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-active-prime-grip\"\u003eActive Prime Grip\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eRequired under anhydrite, gypsum plaster, concrete and existing floor tiles; recommended on highly absorbent cement substrates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWaterproofing — only if needed\u003c\/td\u003e\n\u003ctd\u003eCement-based waterproofing, e.g. \u003ca href=\"\/en\/products\/kerakoll-aquastop-nanoflex\"\u003eAquastop Nanoflex\u003c\/a\u003e (\u003ca href=\"\/en\/collections\/vizszigetelesek-kenheto-cementbazisu-vizszigeteles\"\u003ecement-based waterproofing products\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eFor wet rooms, terraces and pools; not for organic reactive waterproofing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBonding\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePragma Flex — this product\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdhesive bed; walkable and ready for grouting after approx. 20 hours for white and 18 hours for grey (+23 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrouting\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-fugabella-color-fill\"\u003eFugabella Color\u003c\/a\u003e; for pools, \u003ca href=\"\/en\/products\/kerakoll-fugalite-color\"\u003eFugalite Color\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eDecorative resin-cement grout for ceramic tiles, mosaics and stone; epoxy grout for pools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMovement joint\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-silmat-color\"\u003eSilmat Color\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-silicone-color-fill\"\u003eSilicone Color\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eFlexible sealing for movement and perimeter joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich tile adhesive do I need? — \u003ca href=\"\/en\/collections\/ragasztok-csemperagaszto\"\u003eTile adhesives\u003c\/a\u003e\n\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTask\u003c\/th\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eClassification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorous ceramic tiles and mosaics on highly absorbent cement substrates, walls and floors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-super-bio\"\u003eSuper Bio\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC1 E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThick ceramic tiles on walls, laid from top to bottom or diagonally, without slipping\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-special-eco\"\u003eSpecial Eco\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC1 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorcelain stoneware, ceramic and stone tiles on walls and floors, including over plasterboard and interior waterproofing; not over existing tiles\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-biofix\"\u003eBiofix\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverlay tiling, underfloor heating, terraces, pools; ≥ 60 minutes open time (+23 °C); also suitable for rigid wood and metal after priming\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-bioflex\"\u003eBioflex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeformable bonding: large-format tiles, facades, underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-bioflex-s1\"\u003eBioflex S1\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast handover: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for facades and pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-biofast\"\u003eBiofast\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2F TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral tiling on walls and floors, indoors and outdoors; underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePragma Flex — this product\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeformable bonding: large-format tiles, tiling over existing tiles, facades, terraces, pools, saunas\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-pro-s1\"\u003ePragma Pro S1\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast handover, including tiling over existing tiles: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-rapid\"\u003ePragma Rapid\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2F TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReady-to-use paste: interior floors, interior and exterior walls, plasterboard and wood-based boards\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-elastik-eco\"\u003eElastik Eco\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eD2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReady-to-use paste for interior use only: bathrooms, showers, kitchens; for gypsum and anhydrite without primer\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-ready\"\u003ePragma Ready\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eD2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariable-consistency gel (fluid on floors, thixotropic on walls): tiles up to 160×320 cm, underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-gel\"\u003eH40 Gel\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast-setting, deformable gel: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for large-format tiles\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-advanced\"\u003eH40 Advanced\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2F TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHighly flexible gel: facades, large-format fabric-reinforced tiles, stable but cracked substrates\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-tech\"\u003eH40 Tech\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo-component reactive gel: metal, wood, PVC and rubber flooring, thick epoxy and polyurethane coatings; underfloor heating without screed, with aluminium foil\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-extreme\"\u003eH40 Extreme\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eR2 T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo-component flexible adhesive: after cleaning, wood, metal, rubber, PVC, linoleum; XPS, EPS; water-sensitive, staining stone\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-duo\"\u003ePragma Duo\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eR2 T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eClassification according to EN 12004: C = cementitious, D = dispersion (paste), R = reactive; 1 = basic, 2 = increased adhesion; F = fast-setting; T = reduced slip (maximum 0.5 mm on walls); E = extended open time; S1 = deformable, S2 = highly deformable.\u003c\/p\u003e\u003ch3\u003ePragma Flex, Pro S1, Rapid, Duo or Ready?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eBest for this\u003c\/th\u003e\n\u003cth\u003eNot for this\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePragma Flex — this product\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGeneral tiling on rigid substrates: walls and floors, indoors and outdoors, underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003eFor wood, metal, plastic and deformable substrates; on existing floor coverings only after priming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-pro-s1\"\u003ePragma Pro S1\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eDeformable (S1) bonding: large-format tiles, tiling over existing tiles, facades, saunas, industrial spaces\u003c\/td\u003e\n\u003ctd\u003eFor wood, metal, plastic and substrates subject to vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-rapid\"\u003ePragma Rapid\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eUrgent handover: ready for foot traffic and grouting after ≈ 3 hours (+23 °C)\u003c\/td\u003e\n\u003ctd\u003eFor wood, metal, plastic and deformable substrates; shorter pot life than Pragma Flex and Pro S1: ≥ 1 hour (+23 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-duo\"\u003ePragma Duo\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eDeformable or non-absorbent substrate: after cleaning, wood, metal, rubber, PVC, linoleum; XPS, EPS; water-sensitive, staining stone\u003c\/td\u003e\n\u003ctd\u003eFor substrates that are not completely dry or are prone to dampness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-ready\"\u003ePragma Ready\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eNo mixing required; for indoor use: bathrooms, showers, kitchens; gypsum, anhydrite, chipboard\u003c\/td\u003e\n\u003ctd\u003eFor outdoor use, swimming pools and permanently wet areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat they all have in common:\u003c\/strong\u003e porcelain stoneware, ceramic and natural stone tiles for walls and floors; tiles do not slip on walls (T, no more than 0.5 mm); very low emissions (EC1 Plus).\u003c\/p\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do tiles come loose or sound hollow after installation?\u003c\/strong\u003e\u003cbr\u003eOften, the adhesive bed underneath is incomplete, or the adhesive is unsuitable for the substrate. The adhesive must cover the entire back of the tile. This is always required outdoors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much tile adhesive is needed per m²?\u003c\/strong\u003e\u003cbr\u003e≈ 2.5–6 kg\/m², depending on the tile and notched trowel size. One 25 kg bag is enough for ≈ 4–10 m².\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long until it can be walked on and grouted?\u003c\/strong\u003e\u003cbr\u003eAt +23 °C, the white version can be walked on after ≈ 20 hours, the grey after ≈ 18 hours. On walls, the white version can be grouted after ≈ 15 hours, the grey after ≈ 10 hours. Swimming pools can be filled after ≈ 14 days.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the C2 TE classification mean?\u003c\/strong\u003e\u003cbr\u003eC2 TE is a classification for tile adhesives under the EN 12004 standard. C2: cementitious adhesive with higher adhesion. T: tiles slip no more than 0.5 mm on walls; E: extended open time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePragma Flex or Pragma Pro S1?\u003c\/strong\u003e\u003cbr\u003ePragma Flex is for general tiling where a deformable adhesive is not required. \u003ca href=\"\/en\/products\/kerakoll-pragma-pro-s1\"\u003ePragma Pro S1\u003c\/a\u003e is deformable: for large-format tiles, façades and tiling over existing tiles; both require a rigid substrate. For a quick turnaround, use \u003ca href=\"\/en\/products\/kerakoll-pragma-rapid\"\u003ePragma Rapid\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan you tile over old tiles without removing them?\u003c\/strong\u003e\u003cbr\u003eYes, but first apply \u003ca href=\"\/en\/products\/kerakoll-active-prime-fix\"\u003eActive Prime Fix\u003c\/a\u003e or \u003ca href=\"\/en\/products\/kerakoll-active-prime-grip\"\u003eActive Prime Grip\u003c\/a\u003e primer. The existing surface must be level, sound, stable and clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for floor tiles over underfloor heating?\u003c\/strong\u003e\u003cbr\u003eYes, it is also suitable for underfloor heating. The substrate must be cured and dry. Expansion joints must be maintained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used on terraces and in swimming pools?\u003c\/strong\u003e\u003cbr\u003eYes, including terraces, balconies, swimming pools and fountains. Outdoors, full-bed application is required. Protect from heavy rain for at least 24 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan you tile over wood or metal?\u003c\/strong\u003e\u003cbr\u003ePragma Flex cannot be used on wood, metal, plastic or resilient flooring. For these surfaces, use two-component \u003ca href=\"\/en\/products\/kerakoll-pragma-duo\"\u003ePragma Duo\u003c\/a\u003e after cleaning.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"White \/ 25 kg (≈ 4–10 m²)","offer_id":57752285413700,"sku":"004WE","price":14300.0,"currency_code":"HUF","in_stock":true},{"title":"Gray \/ 25 kg (≈ 4–10 m²)","offer_id":57752285446468,"sku":"004WD","price":13950.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-pragma-flex-asvanyi-csemperagaszto-25-kg-feher-szurke.jpg?v=1795198253","url":"https:\/\/www.masterworks.hu\/en\/products\/kerakoll-pragma-flex","provider":"Masterworks Hungary","version":"1.0","type":"link"}