{"product_id":"kerakoll-pragma-ready","title":"Kerakoll Pragma Ready ready-to-use paste tile adhesive","description":"\u003cp\u003eTiling a bathroom or kitchen, but fed up with the dust and mixing? This adhesive is ready to use: apply it straight from the bucket. Tiles do not slip on walls, and there’s time to adjust them. It bonds to plasterboard, gypsum and particleboard, too. Leftovers keep in the sealed bucket until the next job. This is Kerakoll Pragma Ready.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo need to mix with water: ready-to-use paste; simply stir in the bucket before use — for bathroom and kitchen renovations\u003c\/li\u003e\n\u003cli\u003eTiles do not slip on walls: highly thixotropic, vertical slip no more than 0.5 mm (D2 TE, EN 12004) — for wall tiling\u003c\/li\u003e\n\u003cli\u003eTime to adjust: ≥ 30 minutes open time and ≥ 1 hour adjustment time (+23 °C) — for precise joint alignment\u003c\/li\u003e\n\u003cli\u003eAlso for wet areas: bathrooms, showers, kitchens, interior walls and floors — not for permanently wet areas\u003c\/li\u003e\n\u003cli\u003eFor gypsum without primer: apply directly to gypsum and anhydrite if the substrate is completely dry, single-layer and has no fine finish coat — for gypsum plaster and anhydrite screeds\u003c\/li\u003e\n\u003cli\u003eAlso suitable for particleboard and panels: for particleboard, plywood, cement boards and cellular concrete panels — for dry construction\u003c\/li\u003e\n\u003cli\u003eNo waste: in the bucket sealed with its original lid, leftovers keep until the next job\u003c\/li\u003e\n\u003cli\u003eSuitable for a wide range of tiles: porcelain stoneware, extra-thin porcelain stoneware slabs, ceramic tiles, clinker, terracotta, glass and ceramic mosaics, natural stone\u003c\/li\u003e\n\u003cli\u003eSolvent-free and air-friendly: very low emissions (EC1 Plus, French A+ rating) — for homes and offices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCharacteristic\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eTile adhesives; ready-to-use paste tile adhesive for interior walls and floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eWhite organic paste; ready to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003ctd\u003eD2 TE (EN 12004); ≥ 30 minutes open time (+23 °C); EC1 Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e2–10 mm adhesive bed\u003cbr\u003e≈ 1.5–5 kg\/m²\u003cbr\u003e17 kg ≈ 3–11 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e17 kg bucket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003e24 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat is it suitable for?\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Cement screeds; cement, gypsum and synthetic marble plaster; plasterboard, gypsum block panels, cement boards, cellular concrete panels; precast and cast-in-place concrete; gypsum and anhydrite without primer; particleboard, plywood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable coverings:\u003c\/strong\u003e Porcelain stoneware tiles, extra-thin porcelain stoneware slabs, ceramic tiles, clinker, terracotta, glass and ceramic mosaics; natural stone and marble that will not deform due to moisture absorption or become stained; insulating and sound-dampening boards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAreas:\u003c\/strong\u003e Interior use only, walls and floors; bathrooms, showers, kitchens; homes, shops, industrial spaces.\u003c\/p\u003e\u003ch3\u003eNot suitable for:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor exterior use — \u003ca href=\"\/en\/products\/kerakoll-pragma-flex\"\u003ePragma Flex\u003c\/a\u003e is the right choice\u003c\/li\u003e\n\u003cli\u003eFor swimming pools and permanently wet areas\u003c\/li\u003e\n\u003cli\u003eFor damp or moisture-prone substrates\u003c\/li\u003e\n\u003cli\u003eFor non-absorbent substrates with low-absorbency tiles\u003c\/li\u003e\n\u003cli\u003eFor levelling major unevenness with a thick layer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Kerakoll tiling system\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLayer\u003c\/th\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eRole\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePerimeter joint\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-tapetex\"\u003eTapetex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eCompressible strip along the walls; structural and movement joints must be maintained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBonding\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePragma Ready — this product\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReady-mixed paste adhesive bed; ready for foot traffic after ≈ 24 hours (+23 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrouting\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-fugabella-color-fill\"\u003eFugabella Color\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eDecorative epoxy-cement grout for ceramic tiles, mosaics, and stone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMovement joint\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/en\/products\/kerakoll-silmat-color\"\u003eSilmat Color\u003c\/a\u003e \/ \u003ca href=\"\/en\/products\/kerakoll-silicone-color-fill\"\u003eSilicone Color\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eFlexible sealant for movement and perimeter joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich tile adhesive do you need? — \u003ca href=\"\/en\/collections\/ragasztok-csemperagaszto\"\u003eTile adhesives\u003c\/a\u003e\n\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eClassification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorous ceramic tiles and mosaics on highly absorbent cement substrates, for walls and floors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-super-bio\"\u003eSuper Bio\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC1 E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThick ceramic tiles on walls, laid from top to bottom or diagonally, without slipping\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-special-eco\"\u003eSpecial Eco\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC1 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorcelain stoneware, ceramic tiles, and stone for walls and floors; also for plasterboard and indoor waterproofing; not for tiling over existing tiles\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-biofix\"\u003eBiofix\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTiling over existing tiles, underfloor heating, terraces, pools; ≥ 60 minutes open time (+23 °C); also for rigid wood and metal after priming\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-bioflex\"\u003eBioflex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeformable bonding: large-format tiles, façades, underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-bioflex-s1\"\u003eBioflex S1\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast turnaround: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for façades and pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-biofast\"\u003eBiofast\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2F TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral-purpose wall and floor tiling, indoors and outdoors; underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-flex\"\u003ePragma Flex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeformable bonding: large-format tiles, tiling over existing tiles, façades, terraces, pools, saunas\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-pro-s1\"\u003ePragma Pro S1\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast turnaround, also for tiling over existing tiles: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-rapid\"\u003ePragma Rapid\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2F TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReady-to-use paste: indoor floors, indoor and outdoor walls, plasterboard and wood-based panels\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-elastik-eco\"\u003eElastik Eco\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eD2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReady-to-use paste for indoor use only: bathrooms, showers, kitchens; for gypsum and anhydrite without primer\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePragma Ready — this product\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eD2 TE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariable-consistency gel (fluid on floors, thixotropic on walls): tiles up to 160×320 cm, underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-gel\"\u003eH40 Gel\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast-setting deformable gel: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for large-format tiles\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-advanced\"\u003eH40 Advanced\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2F TE S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHighly flexible gel: façades, large-format tiles reinforced with fabric, stable but cracked substrates\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-tech\"\u003eH40 Tech\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eC2 TE S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo-component reactive gel: metal, wood, PVC and rubber flooring, thick epoxy and polyurethane coatings; underfloor heating with aluminium foil, without screed\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-h40-extreme\"\u003eH40 Extreme\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eR2 T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo-component flexible adhesive: after cleaning, for wood, metal, rubber, PVC, linoleum; XPS, EPS; moisture-sensitive, stain-prone stone\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-duo\"\u003ePragma Duo\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eR2 T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eClassification according to EN 12004: C = cementitious, D = dispersion (paste), R = reactive; 1 = basic, 2 = higher adhesion; F = fast-setting; T = reduced slip (maximum 0.5 mm on walls); E = extended open time; S1 = deformable, S2 = highly deformable.\u003c\/p\u003e\u003ch3\u003ePragma Flex, Pro S1, Rapid, Duo, or Ready?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eBest for this\u003c\/th\u003e\n\u003cth\u003eNot suitable for this\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-flex\"\u003ePragma Flex\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eGeneral-purpose tiling on rigid substrates: walls and floors, indoor and outdoor, underfloor heating, terraces, pools\u003c\/td\u003e\n\u003ctd\u003eFor wood, metal, plastic, and deformable substrates; for existing floor coverings only after priming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-pro-s1\"\u003ePragma Pro S1\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eDeformable (S1) bonding: large-format tiles, tiling over existing tiles, façades, saunas, industrial spaces\u003c\/td\u003e\n\u003ctd\u003eFor wood, metal, plastic and substrates exposed to vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-rapid\"\u003ePragma Rapid\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFast handover: walkable and ready for grouting after ≈ 3 hours (+23 °C)\u003c\/td\u003e\n\u003ctd\u003eFor wood, metal, plastic and deformable substrates; shorter pot life than Pragma Flex and Pro S1: ≥ 1 hour (+23 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kerakoll-pragma-duo\"\u003ePragma Duo\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eDeformable or non-absorbent substrates: after cleaning, wood, metal, rubber, PVC, linoleum; XPS, EPS; water-sensitive, stain-prone stone\u003c\/td\u003e\n\u003ctd\u003eFor substrates that are not completely dry or are prone to dampness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePragma Ready — this product\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo mixing, for interior use: bathrooms, showers, kitchens; gypsum, anhydrite, particleboard\u003c\/td\u003e\n\u003ctd\u003eFor exterior use, pools and permanently wet areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat they all have in common:\u003c\/strong\u003e porcelain stoneware, ceramic and natural stone tiles for walls and floors; no tile slip on walls (T, no more than 0.5 mm); very low emissions (EC1 Plus).\u003c\/p\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs there a tile adhesive that can be used without mixing?\u003c\/strong\u003e\u003cbr\u003eYes, this is a ready-to-use paste adhesive: no need to mix with water, just stir it in the bucket. Apply directly to the substrate with a notched trowel. For interior walls and floors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much adhesive do I need per m²?\u003c\/strong\u003e\u003cbr\u003e≈ 1.5–5 kg\/m², depending on the tile and notched trowel size. So one 17 kg bucket covers ≈ 3–11 m².\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long until it is walkable and ready for grouting?\u003c\/strong\u003e\u003cbr\u003eAt +23 °C, it is walkable after ≈ 24 hours. It can be grouted after ≈ 12 hours on walls and ≈ 24 hours on floors. It can be put into full use after ≈ 7 days.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for showers and bathrooms?\u003c\/strong\u003e\u003cbr\u003eYes, for indoor wet areas: bathrooms, showers and kitchens. Not for permanently wet areas or pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the D2 TE classification mean?\u003c\/strong\u003e\u003cbr\u003eD2 TE is a classification for tile adhesives under the EN 12004 standard. D2: dispersion (paste) adhesive with higher adhesion. T: on walls, tiles slip by no more than 0.5 mm; E: extended open time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePragma Ready or Pragma Flex?\u003c\/strong\u003e\u003cbr\u003ePragma Ready needs no mixing and is for interior use only. For exterior use, terraces and pools, use the powder-mixed \u003ca href=\"\/en\/products\/kerakoll-pragma-flex\"\u003ePragma Flex\u003c\/a\u003e. For metal, PVC, rubber and substrates subject to deformation, use \u003ca href=\"\/en\/products\/kerakoll-pragma-duo\"\u003ePragma Duo\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs primer needed on gypsum or anhydrite?\u003c\/strong\u003e\u003cbr\u003eNo primer is needed. The substrate must be completely dry and single-layer, without weakly bonded fine plaster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I tile over old tiles?\u003c\/strong\u003e\u003cbr\u003eNo. It cannot be used on non-absorbent substrates, such as old tiles, with low-absorption tiles. For tiling over old tiles, use \u003ca href=\"\/en\/products\/kerakoll-pragma-pro-s1\"\u003ePragma Pro S1\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePragma Ready or Elastik Eco?\u003c\/strong\u003e\u003cbr\u003eBoth are ready-to-use pastes with a D2 TE classification. For exterior walls, use \u003ca href=\"\/en\/products\/kerakoll-elastik-eco\"\u003eElastik Eco\u003c\/a\u003e. Pragma Ready is for interior use only, on gypsum and anhydrite, without primer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do with the opened bucket?\u003c\/strong\u003e\u003cbr\u003eWhen sealed with the original lid, it will keep until the next job. Protect from frost and store above +5 °C.\u003c\/p\u003e","brand":"Kerakoll","offers":[{"title":"White \/ 17 kg (≈ 3–11 m²)","offer_id":57752337580356,"sku":"0016Z","price":68300.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/8027\/4946\/files\/kerakoll-pragma-ready-kesz-pasztas-csemperagaszto-17-kg.jpg?v=1795198253","url":"https:\/\/www.masterworks.hu\/en\/products\/kerakoll-pragma-ready","provider":"Masterworks Hungary","version":"1.0","type":"link"}