Kerakoll Bioscud Primer solvent-based adhesion-promoting primer

Brand: Kerakoll 🇮🇹

Adhesion-promoting primer for concrete, wood, and bituminous membrane

Price
39.950 Ft
Size:4 l (on concrete ≈ 13–20 m²)
In stock with the supplier, lead time 3-5 days.
Do you have a question?
Our Kerakoll specialist will help you choose the right product.

Is the waterproofing peeling off the old bituminous membrane? There’s nothing for it to grip onto on a smooth, dense surface. This primer forms a thin bonding layer. Suitable for concrete, wood and old membranes. Its bright yellow colour shows where it has been missed. This is Kerakoll Bioscud Primer.

  • Strong adhesion on smooth, dense substrates: for non-absorbent or slightly absorbent, very dense surfaces — concrete, wood, old smooth bituminous membrane; adhesion to concrete ≥ 3 MPa
  • Part of the system: primer for Bioscud, Bioscud BT and Bioscud Fiber waterproofing (for Bioscud BT, use only on concrete and wood)
  • A little goes a long way: on smooth bituminous membrane aged at least 6 months ≈ 50–100 ml/m², on concrete ≈ 200–300 ml/m², on sanded wood ≈ 250 ml/m²
  • Fast application over large areas: ready to use; apply with a solvent-resistant roller or brush. The waterproofing can be applied after 2–4 hours, depending on the substrate and weather conditions
  • See where the primer has been applied: the bright yellow liquid makes any missed areas immediately visible
  • Improves adhesion on old paint too: on well-adhered old aluminium paint and quartz concrete flooring
  • Not a waterproofing product on its own: always apply the Bioscud membrane afterwards, within 24 hours at the latest
Type Special primer; solvent-based adhesion promoter under Bioscud waterproofing (exterior)
Composition Solvent-based solution; bright yellow liquid
Performance Adhesion to concrete ≥ 3 MPa; for non-absorbent or slightly absorbent, dense substrates
Coverage On concrete ≈ 200–300 ml/m²; 4 l ≈ 13–20 m²
On old bituminous membrane ≈ 50–100 ml/m²; 4 l ≈ 40–80 m²
On sanded wood ≈ 250 ml/m²; 4 l ≈ 16 m²
Packaging 4 l bucket
Storage 12 months

Suitable for

Substrates: Non-absorbent, slightly absorbent and dense, or slightly absorbent and friable at the surface: old smooth bituminous membrane; wood; in-situ or precast concrete and reinforced concrete; old, well-adhered aluminium paint and quartz concrete flooring.

Function: Enhances the adhesion of Bioscud, Bioscud BT and Bioscud Fiber waterproofing.

Not suitable:

  • As a standalone waterproofing system (without a Bioscud membrane)
  • For slate-faced bituminous membranes — use diluted waterproofing here (see table)
  • For highly absorbent substrates — use diluted waterproofing here or Active Prime Fix
  • For polystyrene boards (EPS, XPS) not covered with a bituminous membrane
  • For wet, damp, floating or not fully cured substrates
  • Before rain, in strong sunlight, on hot, dirty or crumbling surfaces

The Bioscud roof waterproofing system

Layer Product Function
Repair, sealing Bioscud BT Fix Flame-free bonding and sealing of detached membrane edges, small holes and cracks — water-based Bioscud can be applied only after 7–14 days
Priming — according to the substrate Bioscud Primer — this product Under Bioscud, Bioscud Fiber and Bioscud BT, on compact, non-absorbent or slightly absorbent substrates (concrete, wood; on smooth bituminous membrane, only under Bioscud and Bioscud Fiber); not under Bioscud Artic
Dilution, cleaning Bioscud DL Diluting Bioscud Artic for substrate preparation and spraying; cleaning tools used with Bioscud Artic
Reinforcement Bioscud TNT Tear-resistant reinforcement at the perimeter, joints or over the entire surface
Waterproofing Bioscud / Bioscud Fiber / Bioscud BT / Bioscud Artic Rain-resistant, waterproof layer resistant to standing water
Walking layer — for continuous pedestrian traffic Bioscud Traffic Non-slip, abrasion-resistant walking surface for Bioscud and Bioscud Fiber; on Bioscud BT, only with TNT reinforcement

Priming always depends on the substrate and the waterproofing product — the exact instructions are given in the description of the specific waterproofing product.

Which primer should be used under Bioscud?

Substrate Primer Coverage
Concrete, reinforced concrete Bioscud Primer — this product (under Bioscud, Bioscud Fiber, Bioscud BT); under Bioscud Artic, Artic diluted with Bioscud DL at a 1:0.5 ratio ≈ 200–300 ml/m² (Artic: ≈ 300 g/m²)
Old smooth bituminous membrane Bioscud Primer — this product (under Bioscud, Bioscud Fiber); no primer required under Bioscud BT and Bioscud Artic ≈ 50–100 ml/m²
Wood Bioscud Primer — this product, Keragrip Eco Pulep after cleaning (under Bioscud, Bioscud Fiber, Bioscud BT); under Bioscud Artic, Artic diluted with DL ≈ 250 ml/m² on sanded wood (Artic: ≈ 300 g/m²)
Slate-finished bituminous membrane Bioscud diluted with water at a 1:0.5 ratio (diluted BT under Bioscud BT; Artic diluted with Bioscud DL under Bioscud Artic) ≈ 300 g/m²
Absorbent screed or plaster Under Bioscud, Bioscud diluted at a 1:0.5 ratio or Active Prime Fix diluted at a 1:1 ratio; under Bioscud Fiber, Active Prime Fix only; under Bioscud BT, BT diluted at a 1:0.5 ratio or Active Prime Fix; under Bioscud Artic, Artic diluted with Bioscud DL at a 1:0.5 ratio ≈ 100–200 g/m² (diluted BT and diluted Artic: ≈ 300 g/m²)
Old ceramic or stone flooring Active Prime Grip, undiluted (under Bioscud, Bioscud Fiber); no primer is needed under Bioscud Artic ≈ 200–300 g/m²

Frequently asked questions

Why is the waterproofing peeling off an old bituminous sheet?
Often because the smooth, dense sheet offers nothing for it to grip, or the sheet is still fresh and oily. On sheets that are at least 6 months old and have been cleaned, use an adhesion-promoting primer beneath Bioscud and Bioscud Fiber: Bioscud Primer forms a bonding bridge on the surface at ≈ 50–100 ml/m².

Is primer needed beneath liquid-applied waterproofing?
Generally, yes, on dense, non-absorbent substrates. Apply Bioscud Primer to concrete and wood beneath Bioscud, Bioscud Fiber and Bioscud BT. On smooth bituminous sheets, it is needed under Bioscud and Bioscud Fiber, but not under Bioscud BT or Bioscud Artic. On absorbent substrates, the right choice is a diluted membrane or Active Prime Fix.

How much primer is needed per m²?
On concrete, ≈ 200–300 ml/m²; on old bituminous sheets, ≈ 50–100 ml/m²; on sanded wood, ≈ 250 ml/m². A 4-liter bucket is therefore enough for ≈ 13–20 m² on concrete and ≈ 40–80 m² on bituminous sheets.

How long should I wait before applying the waterproofing?
Depending on the substrate’s absorbency and the weather, after 2–4 hours, but no later than 24 hours. Protect it from rain and condensation for 4 hours.

Can it also be used on slate-covered bituminous sheets?
No. On slate-covered sheets, apply Bioscud diluted with water at a 1:0.5 ratio, at ≈ 300 g/m² (diluted Bioscud BT under Bioscud BT; Bioscud Artic diluted with Bioscud DL under Bioscud Artic). On highly absorbent substrates, pretreatment depends on the waterproofing product — see the table above.

Why is it important not to let it pool on the surface?
Primer that pools in depressions prevents the waterproofing applied over it from adhering. Apply it in a thin, even coat and spread it out of any depressions.

Is it also needed under Bioscud Artic?
No: beneath Bioscud Artic, a primer made from the product itself, diluted with Bioscud DL, is used. On smooth bituminous sheets, it can be applied without primer.

Can it be purchased separately?
Yes. Even if the waterproofing is already in place, you only need to renovate one section of the roof, or the first coat of primer wasn’t enough.

Can I apply it myself?
A solvent-based product for professionals: work with it in a well-ventilated area using a solvent-resistant roller. We also install the complete roof waterproofing system.

A product with no characteristics according to the GreenBuilding Rating, so it should be used with caution. Kerakoll undertakes to improve the Eco classification of Rating zero materials and products.

Downloads

Instructions for use

Substrate: Cured (concrete: 6 months), solid, sound, dry and clean, free of cement debris, form oil, paint and adhesive residues, and dust. On concrete, uneven areas must be repaired first.

Old bituminous membrane: Must be at least 6 months old to allow oils and plasticizers to dissipate. Folds, wrinkles, excessive overlaps and loose areas must be removed mechanically; corners, edges and detached areas must be re-bonded with Bioscud BT Fix. Clean thoroughly when dry; for oily contamination, use a high-pressure washer, then allow to dry completely.

Wood: Sand impregnated or painted surfaces, then clean with Keragrip Eco Pulep.

Application: Ready to use. Apply with a solvent-resistant roller or brush; do not allow it to pool on the surface.

Waiting time: Apply the waterproofing membrane after 2–4 hours, depending on the substrate and weather, but no later than within 24 hours.

Conditions: Between +5 °C and +35 °C. Protect from rain and condensation for 4 hours. Do not apply in strong sunlight, on hot surfaces, or before rain. Do not mix with binders or other additives.

Cleaning: Fresh material can be removed with synthetic thinner.

We also provide installation services.

Entrust the professional execution of Kerakoll products to an expert!

The proper application of Kerakoll building materials and trade products requires special expertise for durable, excellent results. Our company’s trained professionals guarantee compliant execution and long-term quality.

Our comprehensive service includes:

  • Free on-site survey and condition assessment
  • Expert advice for selecting the right product and system
  • Professional surface preparation and priming
  • Professional application of the chosen Kerakoll products
  • Warranty on the execution

Why choose us?

  • Experienced, trained professionals
  • Several years of experience with the full Kerakoll product range
  • Reference projects in residential buildings, public buildings, and industrial facilities
  • Preliminary, detailed price quotation
  • Clean, precise workmanship

Request a material + labor package offer! The professional application of Kerakoll products ensures optimal performance and long service life. Don’t take risks – proper execution is at least as important as quality raw materials!

Please contact us for a price quote at hello@masterworks.hu or call +3670 400 2040.

Technical specifications
  • Product type: one-component, solvent-based adhesion-promoting primer for non-absorbent or slightly absorbent, dense substrates
  • Appearance: bright yellow liquid
  • Chemical nature: solvent-based solution
  • Apparent density: ≈ 0.89 kg/dm³
  • Dry solids content: ≥ 15%
  • Viscosity: ≈ 12 s (Ford cup, 4 mm)
  • Application temperature: +5 °C – +35 °C
  • Waiting time before applying the next coat: ≥ 2 hours (depending on the substrate and weather conditions, 2–4 hours); no later than within 24 hours
  • Coverage: on concrete ≈ 200–300 ml/m²; on old bituminous membrane ≈ 50–100 ml/m²; on sanded wood ≈ 250 ml/m²
  • Adhesion to concrete: ≥ 3 MPa
  • GreenBuilding Rating: 0
  • Packaging: 4 l bucket
  • Storage: ≈ 12 months in the original packaging; protect from direct sunlight and heat sources, and store in a well-ventilated place
Stock and prices

Our online store is open 24/7 and ships Monday through Friday, except for some holidays. Orders received for products without delivery restrictions on the product page will be delivered within 1-3 days if received before 12:00 p.m. In the case of orders placed for products in the suppliers' warehouses, the expected availability time is indicated on the product page, and we deliver according to the indicated time.

In order to provide the best service, we try to keep a stock of the most popular products in our warehouse in Budapest. Such products are labeled "In Stock". These can be collected or delivered within 1-3 days.

All other products must be shipped from the supplier's warehouses. This can take 1-4 weeks (it depends on the manufacturer; please confirm the delivery time with our customer service before ordering). Such products are either marked "In Stock" or require a pre-order together with a request for a quote.

All prices include VAT.

Shipping information

Shipping

Products available in our warehouse are delivered within 1-3 business days. Products not available in our warehouse are first shipped from the manufacturer's warehouse to ours, and then to you; this may take 1-4 weeks.

Available shipping methods in Hungary

  • GLS courier service – up to 120 kg total weight. The fee is calculated automatically based on the weight of your cart (HUF 4,200–25,200) and added to your order at checkout. Orders are dispatched on the business day after they are placed and delivered within 1-3 business days.
  • Request a shipping quote – for products in 18/25 kg bags, orders over 120 kg, or orders to international destinations. The courier service does not deliver bagged (powder) products; individual shipping or personal pickup can be selected for these. The “Request a shipping quote” line shown at checkout is a nominal amount (HUF 100), not the shipping fee: we will email you a quote for the actual fee within 1 business day, and delivery will begin once you accept it.
  • Personal pickup – free of charge, at our warehouse or showroom (1137 Budapest, Radnóti Miklós u. 23.), upon presentation of the confirmation email.

We ship internationally only based on a custom shipping quote. If you have any questions, contact us at hello@masterworks.hu, +36 70 400 2040.

REQUEST A QUOTE

Would you like to request a quote or speak with our Kerakoll product expert?

+36 70 400 2040

hello@masterworks.hu

We also offer installation services.
Request a package quote for materials + labor!

Kerakoll Bioscud Primer solvent-based adhesion-promoting primer

A new-generation waterproofing product range specifically designed to protect buildings from precipitation and other moisture.
TECHNICAL DATA SHEET

PRODUCT BENEFITS

- Developed for old, smooth bituminous membrane roofs
- Particularly suitable for both concrete and wood
- Can be applied quickly over large areas with a roller
- Bright yellow, making it easy to track application
- Adhesion to concrete ≥ 3 MPa

Bioscud: waterproofing product range

The new Bioscud waterproofing range for protection against rainfall was developed by Kerakoll’s GreenLab Organic Waterproofing Products Division and represents the forefront of green research in external waterproofing systems for flat roofs, large roof areas and building structures in general.

In a market increasingly focused on renovation, the innovative Bioscud waterproofing range for protection against rain focuses on the exceptional maintenance and restoration of the functionality of roofs that are increasingly eroded and aging under ever more extreme climatic conditions.

Kerakoll - The GreenBuilding Company

About Kerakoll

In the increasingly important world of sustainable building materials and eco-friendly practices, Kerakoll is a pioneer in the industry. 

Founded in 1968, the Italian company has become a global leader in the production of adhesives, sealants, and other building materials, while remaining committed to environmental protection.

Similar products