Meghatározza a Kerakoll Cementoresina folytonos padló aljzatszerkezetét és a Cementoresina 2 színezett dekoratív befejező termékkel fedendő feszültségelválasztó rétegét.

Kerakoll Cementoresina 1: Színes alapozóréteg Kerakoll Cementoresina padlókhoz. Olasz design az életkomfortért.

Kerakoll Cementoresina - Kerakoll Design Warm Collection

Click image to open expanded view

Kerakoll Cementoresina 1 – system component

Brand: Kerakoll Color Collection 🇮🇹

Resin-based base screed for Cementoresina flooring

Price: 125.750 Ft

This product is out of stock.

Do you have any questions?

Our Kerakoll technical advisor will help you choose the right product.

A Kerakoll Cementoresina 1 is a tinted, two-component resin-based primer smoothing compound for floors. It highlights the structure of the Floorzero stress-distribution layer. The Cementoresina 2 decorative smoothing layer is applied on top, allowing the pattern to show through. This is the Cementoresina system color layer.

Part of the system: the second layer (color primer) of the Cementoresina 6-layer floor system
Over Floorzero: highlights the existing structure and fills minor defects
Colored in the material: can be ordered in the same color code as the Cementoresina 2 layer — so the base layer does not show through the thin topcoat
Even application: smoothed with Trowel 2 spatula, using small circular motions, 1 mm layer thickness
Easy to sand: after 5-10 hours waiting, with a 36-grit disc
Two-component resin: precise mixing required, 30-minute pot life
150 Piero Lissoni colors: Color Collection + 10 Warm Collection shades
Requires Cementoresina 2: not a finished surface on its own

This product is only available as part of the Cementoresina system.

Packaging	Packaging (4 + 1 kg unit pack): Part A 4 kg bucket / Part B 1 kg box Packaging (7 + 1.8 kg): Part A 7 kg bucket / Part B 1.8 kg box
Material requirement	0.75 kg/m²
Layer thickness	≈ 1 mm
Pot life	≈ 30 minutes
Waiting time before sanding and applying the next layer	≈ 5 hours (+30 °C) / ≈ 10 hours (+10 °C)
Storage	≈ 12 months

What is it suitable for?

Substrates:

Floorzero + Net90 stress-distribution layer

Spaces (floor only, interior):

Bathroom floor
Kitchen floor
Living room, office, shop
Stairs
Spa, wellness (Cementoresina R11 system)

Not suitable for:

As a standalone surface (without Cementoresina 2 decorative smoothing layer)
On walls (for that, use the Cementoresina Wall system)
Directly on concrete or tiles without Floorzero stress-distribution layer (would crack)
Outdoor use
Damp substrates

✓ Regional mineral ≥ 30%
X Low VOC emissions
✓ Solvent ≤ 5 g/kg
X Low ecological impact
✓ Healthcare

Downloads

technical data sheet

Declaration of Performance

Cementoresina guide

COLOR COLLECTION BROCHURE

Areas of application

Floorzero base layer:

Sand the Floorzero layer with a 36-grit carborundum disc. Vacuum the dust. Check that it is even, there is no protruding Net90 mesh, and no uncatalyzed areas. In case of defects, repair with Floorzero or mix Cementoresina 1 and fill small defects.

Pour part B into the bucket of part A (4:1 ratio). Mix with a mixer at 300-600 rpm until uniform. Use a trowel along the walls and at the bottom of the bucket — part B may not have reached there. Mix again until the color is completely uniform.

Smooth out with 2 trowels. Small radius, circular motions. Material requirement 0.75 kg/m², ≈1 mm layer thickness. Do not leave bulges, excess, or raised areas. Hold the trowel at a small angle, let the edge slide on the filler.

Wait 5 hours (+30°C) / 10 hours (+10°C). Sand with a 36-grit disc. Vacuum. Application of Cementoresina 2 follows.

We also undertake installation work

Leave the application of Color Collection products to a professional.

Color Collection requires a special application technique for perfect results. Our Kerakoll-certified craftsman guarantees professional installation and the validity of the manufacturer’s warranty.

Our service:

Free on-site assessment
Colour selection advice from 150 shades
Professional surface preparation
Professional application
Workmanship guarantee

Request a quote for materials and labour.

Technical specifications

Application:

Temperature: +10°C — +30°C
Relative humidity: ≤75%
Pot life: ≈30 minutes
Before sanding: 5-10 hours
Full curing: 7 days

Performance (EN 13813:2002):

Compliance: SR-B2,0
Fire resistance: Class Efl
DoP number: EN.IT.0495.000

Physical properties:

Part A: colored mass (KK1-KK150 or WR01-WR10)
Part B: yellow/amber liquid (catalyst)
Mixing ratio: 4:1 by weight
Material requirement: 0.75 kg/m²
Layer thickness: ≈1 mm

Stock and prices

Our webshop is open 24/7. Delivery is available Monday to Friday.

In-stock products are dispatched within 1–3 days. For products supplied from the supplier’s warehouse, the delivery time is 1–4 weeks—please contact our customer service before placing your order.

All prices include VAT.

Shipping information

DPD/GLS delivery — Throughout Hungary, up to 120 kg. Cost: HUF 2,670–20,830, based on weight.

Custom delivery — Request a quote for orders over 120 kg.

Personal pickup — Free of charge from our warehouse.

For delivery-related questions, contact us:

hello@masterworks.hu
+36 70 400 2040

Kerakoll Color Collection arajanlat termekek magyarorszag

PRODUCT BENEFITS

- Colored throughout — uniform color, does not wear off
- Easily workable with Trowel 2
- Highlights the structure of Floorzero
- Flexible and tough
- Easy to sand
- Can be applied without Quarzo 1.3