Kerakoll Keraklima Eco Granello deformable thermal insulation adhesive

Brand: Kerakoll 🇮🇹

High-coverage insulation adhesive and smoothing compound

Price
14.950 Ft
Unit price 598 Ft  per  kg
Color:White
Size:25 kg
In stock with the supplier, lead time 3-5 days.
Do you have any questions?
Our Kerakoll technical advisor will help you choose the right product.

Is the mesh showing through the thin skim coat? Then you have to keep applying more coats. This product gives greater coverage in one coat. Its bond is high-strength and deformable. This is Kerakoll Keraklima Eco Granello.

  • Better coverage per coat: granular (0–1.4 mm) skim coat with greater coverage in one coat — the mesh must still be embedded between two coats
  • Strong yet flexible: deformable, high-strength bonding; adhesion to concrete ≥ 1.0 N/mm², to brick ≥ 0.7 N/mm² (after 28 days), compressive strength ≥ 10 MPa — for all types of insulation board
  • Fast, reliable application: excellent workability, easy to apply, and can also be spray-applied with a plastering machine — ideal for large facade areas
  • One product bonds and skims: apply it to the board as an adhesive, then use two coats as a skim coat, embedding alkali-resistant fibreglass mesh between them — no separate skim coat needed
  • Suitable for a wide range of insulation boards: polystyrene (EPS, XPS), polyurethane, phenolic resin, cork, rock and glass wool, wood fibre, aerogel — on concrete, brick, cement render, mineral and cement-based skim coats
  • Tested in both polystyrene and mineral wool systems: a product in the Klimaexpert ETA EPS and ETA MW system (EAD 040083-00-0404), also for fire-rated Klimaexpert systems — for specification by designers
  • Plenty of working time: the mixed product remains usable for at least 5 hours (+23 °C, 50% relative humidity) — for large, continuous surfaces
Type ETICS adhesives and skim coats; deformable mineral adhesive and skim coat for insulation boards (interior and exterior)
Composition White, pre-mixed mineral powder; crystalline silicate-carbonate filler, 0–1.4 mm
Performance Adhesion to concrete ≥ 1.0 N/mm²; compressive strength ≥ 10 MPa; fire reaction class A1; Klimaexpert ETA EPS and MW system
Coverage As an adhesive: max. 15 mm
As an adhesive: ≈ 3–5 kg/m²; 25 kg ≈ 5–8 m²
As a skim coat: ≈ 1.6 kg/m² per millimetre; 25 kg ≈ 15 m² at 1 mm
Packaging 25 kg bag
Storage 12 months

What is it suitable for?

Substrates: Concrete, brick (fired clay), cement render, mineral and cement-based skim coats. Consolidate weak substrates with Rasobuild Eco Consolidante first.

Function: Bonding and mesh-reinforced skimming of insulation boards: polystyrene (EPS, XPS), polyurethane, phenolic resin, cork, rock and glass wool, wood fibre, aerogel, Klima Airplus and Airtech boards. After drying, a thick-layer decorative coating can be applied.

Areas: Exterior and interior — facades, plinths, interior insulation.

Not suitable:

  • For plaster walls, cultured marble, or ready-mixed gypsum-based plaster
  • For bonding ceramic or natural stone tiles
  • For wood or metal substrates; for damp substrates
  • For filling uneven areas in the substrate — level these first with Geolite or Geocalce
  • Mixed with latex or another additive — water only

ETICS facade build-up

Layer Product Role
1. Substrate preparation (only if needed) Rasobuild Eco Consolidante for unsound substrates; for unevenness, use Geolite or Geocalce Consolidation, leveling
2. Bonding the insulation board Keraklima Eco Granello — this product Fixing the board
3. Insulation board + mechanical fixing Polystyrene, rock wool or another insulation board; use anchors as specified Thermal insulation
4. First skim coat + alkali-resistant fiberglass mesh Keraklima Eco Granello — this product + Rinforzo V 40 or Rinforzo V 50 mesh Reinforcement
5. Second skim coat (after the first has dried) Keraklima Eco Granello — this product Complete coverage of the mesh, even surface
6. Topcoat (after the skim coat has dried) Thick-coat decorative finish Color, decoration

Which ETICS adhesive and skim coat do you need? — ETICS adhesives and skim coats

Task Product Role
Bonding and skim coating all types of insulation boards, including plinths — white or gray Klima Fix Adhesive and skim coat
Highly flexible bonding and skim coating for EPS systems, also suitable for machine spraying — extra white Klima Flex Adhesive and skim coat
Lightweight, high-yield adhesive and skim coat, even in thick coats Klima Light Adhesive and skim coat
NHL lime-based, vapor-permeable adhesive and skim coat for mineral and natural boards Klima Light Calce Adhesive and skim coat
High-strength adhesive and skim coat, fine-grained — white or gray Keraklima Eco Adhesive and skim coat
High-strength, flexible bonding and skim coating for all boards — white Keraklima Eco Granello — this product Adhesive and skim coat
Hail- and impact-resistant, fiber-reinforced skim coat for new and damaged systems Klima HP Skim coat only

Keraklima Eco or Keraklima Eco Granello?

Keraklima Eco Keraklima Eco Granello — this product
Key strength Fine-grained finish; less material for bonding Flexible bonding; greater coverage in a single coat
Grain size 0–1 mm 0–1.4 mm
Adhesion to concrete; compressive strength ≥ 0.9 N/mm²; ≥ 8 MPa ≥ 1.0 N/mm²; ≥ 10 MPa
Color White or gray White
Klimaexpert ETA system EPS EPS and mineral wool (MW)
As an adhesive ≈ 2.5–4 kg/m² ≈ 3–5 kg/m²
As a skim coat ≈ 1.5 kg/m² per millimeter ≈ 1.6 kg/m² per millimeter

Common to both: high-strength bonding and skim coating; same types of insulation boards; can be sprayed with a plastering machine; fire classification A1; 25 kg bag.

Frequently asked questions

Why is the mesh visible through the smoothing coat (on a dryvit facade)?
Because the smoothing coat is too thin, or the second coat does not fully cover the mesh. The mesh belongs between the two smoothing coats. Keraklima Eco Granello provides greater coverage in one coat, but two smoothing coats are still required.

How much adhesive and smoothing compound do I need per m²?
For bonding: approximately 3–5 kg/m²; for smoothing: approximately 1.6 kg/m² per millimeter. One 25 kg bag covers approximately 5–8 m² for bonding or approximately 15 m² for a 1 mm smoothing coat. A thicker smoothing coat covers proportionally less area.

How should mesh be installed on an insulated facade?
Use alkali-resistant fiberglass mesh between two smoothing coats. Press the mesh into the first, still-fresh coat with a trowel; once this has dried, the second coat must fully cover it. The Rinforzo V 40 and Rinforzo V 50 are available as Kerakoll ETICS mesh.

How long does the mixed material remain workable, and when can I apply the second coat?
The mixed material remains workable for at least 5 hours (+23 °C, 50% relative humidity). Apply the second smoothing coat after the first has dried. Protect the finished surface from rain for at least 48 hours; drying takes longer in cold or humid weather.

Keraklima Eco or Keraklima Eco Granello?
For deformable bonding and ETA systems with mineral wool, choose Granello. For a fine-grained (0–1 mm) finish and a gray color, choose Keraklima Eco. Both are high-strength adhesives and smoothing compounds.

Is it suitable for mineral wool too, or only for polystyrene?
Both. As a tested Klimaexpert system (ETA), it is listed for both polystyrene (EPS) and mineral wool (MW) boards. It also bonds and smooths Nikecell, polyurethane, phenolic resin, cork, wood fiber and aerogel.

What does deformable bonding mean?
It means the cured adhesive layer is not completely rigid but can deform. The manufacturer describes it as a high-strength, deformable adhesive.

Can it also be bonded to a wall with gypsum plaster?
Not recommended: the manufacturer does not recommend it for gypsum walls, artificial marble or ready-mixed gypsum-based plaster. For such walls, the layer system must be agreed on before installation. It is also unsuitable for wood, metal and damp substrates.

Can it also be applied by machine?
Yes, it can also be applied by spraying with a plastering machine, which speeds up the work. Mix only with water: 25 kg of powder requires approximately 5 liters of water.

Can I apply it myself?
Product for professionals. The thermal insulation system requires scaffolding, mechanical fixings and mesh installation. We also carry out facade work.

✓ Regional mineral content ≥ 60%
✓ Recycled regional mineral content ≥ 30%
✓ CO2 emissions ≤ 250 g/kg
✓ Low VOC emissions
✓ Recyclable

Downloads

User guide

Substrate: Level, solid, clean, dry, and free of loose material. For non-solid substrates, first apply Rasobuild Eco Consolidante Do not apply to gypsum, cultured marble, or ready-mixed gypsum plaster. Concrete must be free of form oil. First level uneven surfaces with Geolite or Geocalce. Do not apply to substrates above +30 °C.

Mixing: 25 kg of powder ≈ 5 l of water. Pour the water into a clean container first, then gradually add the powder; mix in a concrete mixer or bucket at low speed until smooth and lump-free. Use water only — do not add latex or other additives.

Bonding: Apply directly to the panel with a notched trowel: in a continuous strip around the perimeter and in spots in the center (perimeter-and-spot bonding), or as a full bed, depending on substrate unevenness. Press the panel firmly against the substrate. For Klima Airplus and Airtech panels, apply the adhesive in the dovetail grooves. Adjust only immediately after placing. Mechanical fixings (dowels) must be installed in accordance with the requirements.

Smoothing and mesh: Apply the first coat evenly with a notched trowel. Embed alkali-resistant fiberglass mesh into the still-fresh coat, pressing it in with a trowel. Once the first coat has dried, apply a second coat that fully covers the mesh and provides a surface suitable for thick-layer decorative finishes. Can also be spray-applied with a plastering machine.

Protection and conditions: Apply between +5 °C and +30 °C. Protect the finished surface from rain by covering it for at least 48 hours. Do not apply to a damp substrate.

Cleaning: Tools can be cleaned with water before the material sets.

We also undertake installation work

Entrust the professional execution of Kerakoll products to an expert!

The proper application of Kerakoll building materials and trade products requires special expertise for durable, excellent results. Our company’s trained professionals guarantee compliant execution and long-term quality.

Our comprehensive service includes:

  • Free on-site survey and condition assessment
  • Expert advice for selecting the right product and system
  • Professional surface preparation and priming
  • Professional application of the chosen Kerakoll products
  • Warranty on the execution

Why choose us?

  • Experienced, trained professionals
  • Several years of experience with the full Kerakoll product range
  • Reference projects in residential buildings, public buildings, and industrial facilities
  • Preliminary, detailed price quotation
  • Clean, precise workmanship

Request a material + labor package offer! The professional application of Kerakoll products ensures optimal performance and long service life. Don’t take risks – proper execution is at least as important as quality raw materials!

Please contact us for a price quote at hello@masterworks.hu or call +3670 400 2040.

Technical specifications
  • Product type: one-component mineral adhesive and levelling compound for all types of thermal insulation boards (ETICS), for interior and exterior use
  • Appearance: white premixed powder
  • Aggregate: natural mineral, crystalline silicate-carbonate
  • Particle size: ≈ 0–1400 µm (EN 1015-1)
  • Bulk density of hardened, dry product: 1480 kg/m³ (EN 1015-10)
  • Ash content: 97.2% at +450 °C; 61.6% at +900 °C (EAD 040083-00-0404)
  • Water retention: > 94% (EAD 040083-00-0404)
  • Mixing water: ≈ 5 l / 25 kg
  • Density of mixture: ≈ 1.68 kg/dm³ (EN 1015-6)
  • Pot life: ≥ 5 hours
  • Application temperature: +5 °C – +30 °C
  • Max. layer thickness as adhesive: ≤ 15 mm
  • Consumption: as adhesive ≈ 3–5 kg/m²; as levelling compound ≈ 1.6 kg/m²/mm
  • Adhesion to concrete / brick (28 days): ≥ 1.0 / ≥ 0.7 N/mm² (EAD 040083-00-0404)
  • Adhesion to EPS: ≥ 0.15 N/mm² (with cohesive failure in the EPS; EAD 040083-00-0404)
  • Capillary water absorption: 0.34 kg/m² (EAD 040083-00-0404)
  • Compressive strength: ≥ 10 MPa; flexural strength: ≥ 6 MPa (EN 1015-11)
  • Water vapour diffusion resistance factor (μ): 23 (EN 1015-19)
  • Thermal conductivity (λ10, dry): 0.46 W/(m·K); specific heat capacity: 1.0 kJ/(kg·K) (EN 1745)
  • Reaction to fire class: A1 (EN 13501-1)
  • Temperature resistance: −15 °C – +80 °C
  • System: Klimaexpert ETA EPS and Klimaexpert ETA MW (EAD 040083-00-0404); fire protection Klimaexpert systems
  • Certification, marking: CE (EN 998-1); EPD-IES-0015998; Fire tested / fire protection system mark
  • Indoor air quality: EC 1 plus GEV-Emicode (GEV 4060/11.01.02); A+ (French indoor emissions class)
  • GreenBuilding Rating: 5
  • Packaging: 25 kg bag
  • Storage: ≈ 12 months in original, unopened packaging, protected from moisture

Data measured at +23 °C and 50% relative humidity, without ventilation. On-site conditions may vary.

Stock and prices

Our online store is open 24/7 and ships Monday through Friday, except for some holidays. Orders received for products without delivery restrictions on the product page will be delivered within 1-3 days if received before 12:00 p.m. In the case of orders placed for products in the suppliers' warehouses, the expected availability time is indicated on the product page, and we deliver according to the indicated time.

In order to provide the best service, we try to keep a stock of the most popular products in our warehouse in Budapest. Such products are labeled "In Stock". These can be collected or delivered within 1-3 days.

All other products must be shipped from the supplier's warehouses. This can take 1-4 weeks (it depends on the manufacturer; please confirm the delivery time with our customer service before ordering). Such products are either marked "In Stock" or require a pre-order together with a request for a quote.

All prices include VAT.

Shipping information

Shipping

Products available in our warehouse are delivered within 1-3 business days. Products not available in our warehouse are first shipped from the manufacturer's warehouse to ours, and then to you; this may take 1-4 weeks.

Available shipping methods in Hungary

  • GLS courier service – up to 120 kg total weight. The fee is calculated automatically based on the weight of your cart (HUF 4,200–25,200) and added to your order at checkout. Orders are dispatched on the business day after they are placed and delivered within 1-3 business days.
  • Request a shipping quote – for products in 18/25 kg bags, orders over 120 kg, or orders to international destinations. The courier service does not deliver bagged (powder) products; individual shipping or personal pickup can be selected for these. The “Request a shipping quote” line shown at checkout is a nominal amount (HUF 100), not the shipping fee: we will email you a quote for the actual fee within 1 business day, and delivery will begin once you accept it.
  • Personal pickup – free of charge, at our warehouse or showroom (1137 Budapest, Radnóti Miklós u. 23.), upon presentation of the confirmation email.

We ship internationally only based on a custom shipping quote. If you have any questions, contact us at hello@masterworks.hu, +36 70 400 2040.

REQUEST A QUOTE

Would you like to request a quote or speak with our Kerakoll product expert?

+36 70 400 2040

hello@masterworks.hu

We also offer installation services.
Request a package quote for materials + labor!

Kerakoll Keraklima Eco Granello deformable thermal insulation adhesive

PRODUCT BENEFITS

- Excellent workability
- Greater coverage in a single coat
- Easy to apply, quick and safe installation
- Product for Klimaexpert ETA EPS and ETA MW systems
- Also for fire protection Klimaexpert systems
- Flexible, high-strength bonding for all board types
- GreenBuilding Rating 5: verified environmental impact

Kerakoll - The GreenBuilding Company

About Kerakoll

In the increasingly important world of sustainable building materials and eco-friendly practices, Kerakoll is a pioneer in the industry. 

Founded in 1968, the Italian company has become a global leader in the production of adhesives, sealants, and other building materials, while remaining committed to environmental protection.

Similar products