Kerakoll Isobuild Eco Block thin-bed masonry mortar for aerated concrete

Brand: Kerakoll 🇮🇹

Pórusbeton ragasztó és simító, hőhíd nélkül

Price
8.950 Ft
Unit price 358 Ft  per  kg
Size:25 kg
In stock at the supplier, order processing time is 3-5 days.
Do you have any questions?
Our Kerakoll technical advisor will help you choose the right product.

A thick mortar joint in an aerated concrete wall? The joint becomes a thermal bridge, and the wall cools there. This thin-bed adhesive preserves the continuity of the thermal insulation. The wall can also be smoothed with the same material. The manufacturer confirms an EI 180 fire-resistance classification (EN 13501-2). This is Kerakoll Isobuild Eco Block.

  • Continuous thermal insulation, no thermal bridge at the joint: thin-bed (type T) mortar — also between load-bearing and non-load-bearing aerated concrete elements
  • Can be applied directly to the panel: with a notched trowel — for bonding aerated concrete blocks and panels, for load-bearing and infill masonry
  • Non-combustible mortar, fire-resistant wall: the tested wall assembly has an EI 180 classification (EN 13501-2, report N. 296636/3443FR), fire reaction class A1 — for fire compartment walls
  • The same material bonds and smooths: one product instead of two — for levelling cement render, thermal-insulating render, concrete and aerated concrete walls
  • Time to adjust the block: correction time on aerated concrete ≥ 7 minutes (+20 °C, 65% humidity) — for adjustment during laying
  • Meets structural requirements: M5 compressive strength class, type T according to EN 998-2, CE marking — for load-bearing masonry
  • Easy mixing, low indoor emissions: single-component powder, only water is needed; EC 1 plus and A+ class — for exterior and interior walls
  • Can also be smoothed with reinforcing mesh: glass-fibre mesh must be embedded in the smoothing layer according to the manufacturer's instructions — on extensive surfaces exposed to significant temperature fluctuations
Type Masonry mortar; thin-bed adhesive and smoothing mortar for aerated concrete masonry (exterior and interior)
Composition Single-component, mineral-based white powder; crystalline silicate-carbonate, 0–800 µm
Performance EN 998-2 type T, M5; EI 180 (EN 13501-2); A1; EC 1 plus; A+
Material consumption Max. 5 mm (as a smoothing compound)
As an adhesive ≈ 2–3 kg/m²; 25 kg ≈ 8–12 m²
As a smoothing compound ≈ 1.4 kg/m² per millimetre; 25 kg ≈ 17 m² at 1 mm
Packaging 25 kg bag
Storage 12 months


What is it suitable for?

Substrates, masonry units: Aerated concrete (cellular concrete) blocks and panels · thermal-insulating masonry blocks · concrete · cement render · thermal-insulating render.

Function: Bonding — load-bearing aerated concrete wall, infill masonry with thermal-insulating blocks, fire compartment wall · smoothing — cement render, thermal-insulating render, concrete and aerated concrete wall.

Areas: Exterior and interior.

Not suitable for:

  • For flexible or gypsum-based substrates
  • For installing gypsum panels
  • For layers thicker than 5 mm
  • With the addition of lime, gypsum or cement

Aerated concrete wall build-up

Layer Product Role
1. Masonry Isobuild Eco Block — this product (with a notched trowel) Thin bed, no thermal bridge
2. Levelling, smoothing (with fibreglass mesh on large surfaces exposed to temperature fluctuations) Isobuild Eco Block — this product (with a steel trowel) Level wall
3. Surface Paint, coating Finished wall


Which masonry mortar is needed? — Masonry mortar

Task Product Masonry unit
Breathable lime masonry, bedding, and filling — M5 Biocalce Muratura Brick, stone, tuff, mixed masonry
High-strength, breathable lime masonry and reinforced strengthening — M10 Biocalce Muratura Fino Brick, stone, tuff, mixed masonry
Pointing and laying exposed stone and brick walls Biocalce Pietra Stone, brick
Thin-bed bonding and smoothing of aerated concrete blocks — M5 Isobuild Eco Block — this product Aerated concrete, thermal insulation block



Frequently asked questions

What should be used to bond aerated concrete masonry blocks (e.g. Ytong)?
With thin-bed (type T) masonry mortar, using a notched trowel. The thin joint does not create a thermal bridge. Isobuild Eco Block is designed for aerated concrete blocks and panels.

What does EI 180 mean?
Fire resistance classification according to EN 13501-2. This means that the tested wall assembly maintains its integrity (E) and thermal insulation (I) for 180 minutes. It can also be used for fire compartment walls. The EI classification does not include load-bearing capacity (R).

How much adhesive is needed per m²?
As an adhesive: ≈ 2–3 kg/m²; one 25 kg bag covers ≈ 8–12 m². As a smoothing compound: ≈ 1.4 kg/m² per millimetre; at 1 mm, ≈ 17 m².

Can it also be used for smoothing?
Yes: for smoothing cement plaster, thermal insulation plaster, and concrete and aerated concrete walls. Apply the first layer as a hair-thin coat to the moistened surface with a steel trowel. Apply the second layer to the desired thickness, up to 5 mm.

How much time is available to adjust the block?
On aerated concrete, the adjustment time is ≥ 7 minutes (+20 °C, 65% humidity). On very hot or sunny days, the panels must be moistened. If a skin forms on the adhesive, use fresh material.

Isobuild Eco Block or Biocalce Muratura?
For bonding aerated concrete blocks with thin joints: Isobuild Eco Block. For traditional, breathable lime bedding of brick, stone, and mixed masonry: Biocalce Muratura.

When should I not use it?
For gypsum-based or flexible substrates, and for installing gypsum panels. Not even in layers thicker than 5 mm. Do not mix in lime, gypsum, or cement.

Can I apply it myself?
A product for professionals. Applying the thin, even bed with a notched trowel requires practice. We also carry out the masonry work and smoothing.

✓ Regionális ásványi anyag ≥ 60%
✓ Újrahasznosított regionális ásványi anyag ≥ 30%
✓ CO2-kibocsátás ≤ 250 g/kg
✓ Alacsony VOC-kibocsátás
✓ Újrahasznosítható

Downloads

User guide

Substrate preparation: The installation surface must be sound, clean, and free of dust and grease. Any crumbling parts of the panels must be removed. On hot days or on highly absorbent surfaces, it is advisable to dampen the surface before smoothing.

Mixing: Pour the water (≈ 7.5 l / 25 kg) into a clean container, then gradually add the powder. Mix at low speed until a creamy, lump-free mixture is obtained.

Bonding: Apply directly to the panels with a notched trowel. Press the elements evenly against each other so that the adhesive thoroughly wets the surface. The end faces of the panels (vertical joints) must also be bonded.

Smoothing: Apply the first layer to the dampened surface with a steel trowel, in a hair-thin coat. Then apply the second layer to the required thickness, max. 5 mm. On large surfaces exposed to temperature fluctuations, embed fiberglass mesh.

Waiting period, protection: Protect the finished work from rain for 24 hours.

Conditions: Between +5 °C and +30 °C. On very hot, sunny days, the panels must be dampened. If a skin forms on the adhesive, remove it and use fresh material. Do not add water at the beginning of setting.

We also undertake installation work

Entrust the professional execution of Kerakoll products to an expert!

The proper application of Kerakoll building materials and trade products requires special expertise for durable, excellent results. Our company’s trained professionals guarantee compliant execution and long-term quality.

Our comprehensive service includes:

  • Free on-site survey and condition assessment
  • Expert advice for selecting the right product and system
  • Professional surface preparation and priming
  • Professional application of the chosen Kerakoll products
  • Warranty on the execution

Why choose us?

  • Experienced, trained professionals
  • Several years of experience with the full Kerakoll product range
  • Reference projects in residential buildings, public buildings, and industrial facilities
  • Preliminary, detailed price quotation
  • Clean, precise workmanship

Request a material + labor package offer! The professional application of Kerakoll products ensures optimal performance and long service life. Don’t take risks – proper execution is at least as important as quality raw materials!

Please contact us for a price quote at hello@masterworks.hu or call +3670 400 2040.

Technical specifications
  • Product type: one-component, mineral-based adhesive and smoothing mortar for aerated concrete panels (for interior and exterior use)
  • Mortar type: thin-layer masonry mortar (T) - EN 998-2
  • Appearance: white premixed powder
  • Filler: crystalline silicate-carbonate
  • Particle size: ≈ 0–800 µm
  • Bulk density: ≈ 1.31 kg/dm³ (powder) · fresh mortar ≈ 1.65 kg/dm³ · hardened ≈ 1.29 kg/dm³
  • Mixing water: ≈ 7.5 l / 25 kg
  • pH: ≥ 12
  • Adjustment time on aerated concrete: ≥ 7 minutes
  • Coverage: as adhesive ≈ 2–3 kg/m² · as smoothing mortar ≈ 1.4 kg/m²/mm
  • Max. layer thickness: 5 mm
  • Compressive strength: M5 category (EN 998-2)
  • Initial shear strength on aerated concrete: 0.3 N/mm² (tabulated value)
  • Thermal conductivity (λ10, dry): 0.37 W/(m·K) (tabulated value, EN 1745)
  • Water vapour diffusion resistance factor (μ): 5/20 (tabulated value, EN 1015-19)
  • Capillary water absorption: ≤ 0.7 kg/(m²·min⁰,⁵) (EN 1015-18)
  • Chloride content: ≤ 0.05% Cl (EN 1015-17)
  • Fire resistance: EI 180 (EN 13501-2; test report N. 296636/3443FR)
  • Reaction to fire classification: A1 (EN 13501-1)
  • Indoor air quality: EC 1 plus GEV-Emicode (GEV 8454/11.01.02) · A+ (French indoor emissions classification)
  • Application temperature: +5 °C – +30 °C
  • GreenBuilding Rating: 5
  • Packaging: 25 kg bag
  • Storage: ≈ 12 months from the date of manufacture, in the original intact packaging, protected from moisture
Stock and prices

Our online store is open 24/7 and ships Monday through Friday, except for some holidays. Orders received for products without delivery restrictions on the product page will be delivered within 1-3 days if received before 12:00 p.m. In the case of orders placed for products in the suppliers' warehouses, the expected availability time is indicated on the product page, and we deliver according to the indicated time.

In order to provide the best service, we try to keep a stock of the most popular products in our warehouse in Budapest. Such products are labeled "In Stock". These can be collected or delivered within 1-3 days.

All other products must be shipped from the supplier's warehouses. This can take 1-4 weeks (it depends on the manufacturer; please confirm the delivery time with our customer service before ordering). Such products are either marked "In Stock" or require a pre-order together with a request for a quote.

All prices include VAT.

Shipping information

Products available in our warehouse are delivered within 1-3 days.

Products not available in our warehouse are first shipped from the manufacturer’s warehouse to our warehouse, and then from there to you. Shipping from the manufacturer’s warehouse may take 1-2 weeks.

Available delivery options

  • GPS delivery is available throughout Hungary for orders up to 120 kg, with costs ranging from 4,200 to 25,200 HUF. The costs are determined based on the weight of the ordered products and are automatically added to your cart at checkout. Dispatch from our warehouse takes place on the next working day after the order to ensure fast and safe delivery of your order.
  • Upon request, we can also provide a custom delivery quote (useful for shipments over 120 kg).
  • You may also choose to pick up the goods free of charge from our warehouse.

Delivery terms for orders to other parts of Hungary are prepared upon request. Please contact us for a quote at hello@masterworks.hu or call +3670 400 2040.

REQUEST A QUOTE

Would you like to request a quote or speak with our Kerakoll product expert?

+36 70 400 2040

hello@masterworks.hu

We also undertake installation work.
Request a package quote including materials and labour!

Kerakoll Isobuild Eco Block thin-bed masonry mortar for aerated concrete

PRODUCT BENEFITS

- EI 180 class
- Ideal for paving and leveling

Kerakoll - The GreenBuilding Company

About Kerakoll

In the increasingly important world of sustainable building materials and eco-friendly practices, Kerakoll is a pioneer in the industry. 

Founded in 1968, the Italian company has become a global leader in the production of adhesives, sealants, and other building materials, while remaining committed to environmental protection.

Similar products