Do you have a question? Call +3670 400 2040 or email hello@masterworks.hu 🇭🇺
Brand: Kerakoll Color Collection 🇮🇹
Resin-based parquet paint – 2-coat system
Packaging: 5 m² quantities | Price: per 5 m² | Under 10 m²: +30% surcharge
The parquet is good. The color is not. Gray, white, anthracite – you can recolor the existing wood in 150 shades. This is the Kerakoll Microresina Parquet.
| Package contents | 2 products (Microresina + Microresina Xtreme) everything needed for 5 m² |
|---|---|
| Packaging | Items of 5 m², minimum 10 m², under 10 m² +30% surcharge |
| Execution time | 2 days |
| Walkable | After 48 hours (light), 7–10 days (commercial) |
Substrates: Oak parquet (glued, 9-11% moisture), Legno+Color S/M/L, beech/walnut/ash (Primer Antitannino primer), old lacquered parquet (sanded)
Spaces (indoor, medium traffic): Living room, bedroom, hallway, office, shop, showroom, restaurant/hotel (for intensive traffic use Xtreme in 2 layers)
Not suitable for: Outdoor, floating/click parquet, surface below +10°C, wood with moisture content above 11%, oiled/waxed surface (without sanding), unstable substrate
For ceramic floors? Microresina Floor – for tiles, gres, concrete, without demolition, in 2 days.
The Microresina Parquet package contains 2 products: Microresina + Microresina Xtreme. This is enough for oak wood. For other wood types, Primer Antitannino must be purchased separately.
| Layer | Product | Function | Material requirement |
|---|---|---|---|
| 0 | Primer Antitannino | Tannin-blocking primer (3 layers) – only for non-oak, sold separately | 0.30 l/m² |
| 1 | Microresina | Color layer (in 2 layers) | 0.22 kg/m² |
| 2 | Microresina Xtreme | Protective layer | 0.08 l/m² |
Is it possible to recolor parquet?
Yes. You sand off the old varnish, apply Microresina in 2 layers, seal it with the Xtreme protective layer. The wood remains, the color changes.
How does oak parquet become grey?
After sanding, Microresina in the chosen grey shade (Neutral Grey or Cold Grey palette). Two layers of color, one layer of protection. Walkable after 48 hours.
Is the wood grain visible after recoloring?
Yes. Ultra-thin microfilm – colors but does not cover. The grain and texture remain.
Suitable for beech, walnut, or ash parquet?
Yes, but Primer Antitannino primer is required (sold separately). Apply in 3 layers, 36 hours drying.
Cheaper than replacing the parquet?
Yes. No demolition, debris, or new material. Typically 50-70% cheaper than replacing parquet.
What is the difference between Microresina Parquet and Floor?
For Parquet wood – sanded parquet. Microresina Floor is for tiles – ceramic, stone, concrete without demolition. Different substrate, different system.
Microresina Parquet or traditional refinishing?
Refinishing restores the original color. Microresina Parquet offers 150 new shades – gray, white, anthracite, colored.
I bought Legno parquet – what do I need?
This is the system. Microresina Parquet is designed for decorating and protecting Legno floors. The same 150 colors, matching shades.
What colors are available?
150 colors from the Piero Lissoni Color Collection. One color code matches wall, floor, and ceiling.
What is the minimum order?
Available in 5 m² lots. Orders under 10 m² incur a +30% surcharge.
The Color Collection offers 150 Piero Lissoni colors in 20 surface types.
One color code covers the wall, floor, ceiling, door, and window frame. Dusty tones make any combination work—same shade throughout, or deliberate contrast. The Color Fill completes the system with 50 matching grouts and silicones.
This page presents the Navy Blue palette. 150 colors, 15 palettes. The others are available on separate pages.
X Low VOC emissions
✓ Water-based
X Solvent ≤ 80 g/kg
X Low ecological impact
X Healthcare
Oak parquet: Completely sand off the old varnish – no traces of previous oil or chemicals should remain. Vacuum thoroughly, wipe with a damp cloth. Wait 2 hours. Microresina Roller Plus roller, 2 coats – 0.11 kg/m² per coat. Drying between coats 3-4 hours. Apply the second coat within 12 hours (afterwards Softpad sanding is necessary). Microresina Xtreme protective layer 0.08 l/m² – evenly with a roller. Walkable after 48 hours.
Legno+Color Small/Medium/Large:Remove adhesive residues with a spatula. Sand with 60-grit paper in the direction of the grain – entire surface evenly. Softpad smoothing. Vacuum, damp wipe. Microresina 2 coats, Microresina Xtreme protective layer.
Beech, walnut, ash (non-oak wood species):Sanding, vacuuming, damp wiping. Primer Antitannino in 3 coats (total 0.30 l/m²) – with a roller, 2-4 hours between coats. Wait 36 hours after the third coat. Softpad smoothing. Vacuuming. Microresina 2 coats, Microresina Xtreme protective layer.
High traffic areas (restaurant, hotel, shop): Microresina 2 coats, then Microresina Xtreme protective layer in 2 coats (total 0.16 l/m²). First protective layer dries in 2-3 hours. Second protective layer within 12 hours. If more time passes, Softpad sanding is required in between.
Repairing deep scratches:60 → 80 → 100 grit sizes, always in the direction of the grain. Vacuum between layers. Softpad smoothing at the end.
Leave the application of Color Collection products to a professional.
Color Collection requires a special application technique for perfect results. Our Kerakoll-certified craftsman guarantees professional installation and the validity of the manufacturer’s warranty.
Our service:
Request a quote for materials and labour.
Our webshop is open 24/7. Delivery is available Monday to Friday.
In-stock products are dispatched within 1–3 days. For products supplied from the supplier’s warehouse, the delivery time is 1–4 weeks—please contact our customer service before placing your order.
All prices include VAT.
DPD/GLS delivery — Throughout Hungary, up to 120 kg. Cost: HUF 2,670–20,830, based on weight.
Custom delivery — Request a quote for orders over 120 kg.
Personal pickup — Free of charge from our warehouse.
For delivery-related questions, contact us:
Would you like to request a quote or speak with our Kerakoll product expert?
We also undertake installation.
Request a material + labor package offer!
- 50-70% cheaper than replacing parquet – sanding and recoloring without demolition
- The grain remains visible – ultra-thin film colors but does not cover
- Durable even in dark colors – wear-resistant, scratch-resistant, chemical-resistant (ASTM D4060, EN 12720)
- Antibacterial matte surface – no shine, does not show footprints (ISO 22196)
- Suitable for children’s and food industry environments – EN 71-3, HACCP certified
- 150 Piero Lissoni colors – matching walls, floors, and ceilings
- Ready in 2 days – walkable after 48 hours, furniture placement after 7 days
+3670 400 2040
hello@masterworks.hu
Showroom
23 Radnóti Miklós Street
1137 Budapest
Route
Warehouse
GSP warehouse
1 Dávid Schwarz Street
2220 Vecsés
Route
© 2026, Masterworks Hungary
Green building. Interior design.