50 colors. Grout, silicone, and epoxy grout – in matching shades. The color stays. Water beads off. This is Kerakoll Fugabella Color.
Why is this different from regular grout?
Most grouts are pure cement. They absorb water, whiten, and lose their color. Fugabella Color is a resin-cement hybrid. The resin repels water. It retains color. It prevents efflorescence. Meanwhile, it’s easier to work with than traditional cement grout – ready to use immediately without resting. One grout – not two.
- Design freedom: 50 colors, and grout, epoxy grout, and silicone available in matching shades – no other manufacturer offers such a range
- Consistent color from day one: the resin locks in the pigment, the color remains after drying exactly as mixed
- Water-repellent surface: ≤ 1 g water absorption after 240 minutes (CG2 WA) – water beads off, no efflorescence appears
- Permanently hygienic: the material composition protects the grout from mold and bacteria without added chemicals (ISO 846:2019 A/B/C)
- One grout for anywhere: floor, wall, outdoor, pool, underfloor heating, boat – frost resistant (-40 °C), heat resistant (+90 °C)
- Flexible: Suitable for wooden floors and moving substrates when mixed with Fugaflex Eco latex – prevents color bleed in dark shades
- Disinfectable: resistant to common acidic cleaners, dirt does not penetrate
| Joint width |
2-20 mm |
| Ready for use |
≈ 3 hours (+23 °C) |
| Walkable |
≈ 24 hours |
| Packaging |
Bag 20 kg / 3 kg |
| Compliance |
CG2 WA – ISO 13007-3 |
| Storage |
3 kg bag ≈ 24 months
20 kg bag ≈ 12 months |
What is it suitable for?
Groutable materials:
Porcelain stoneware, stoneware (including extra thin), ceramic, clinker, terracotta, glass and ceramic mosaic, natural stone, marble, reconstituted stone.
Spaces:
Bathroom, kitchen, living room, restaurant, office, outdoor terrace, facade, pool, fountain, underfloor heating, boat. Floor and wall, heavy traffic, frost-exposed areas.
Need extra flexibility or a dark color?
Fugaflex Eco mixed with latex. Recommended for: wooden floors, thermal expansion, before polishing, dark colors. Fugaflex Eco is cream-colored – dark shades may lighten slightly. Make a test grout.
Not suitable for: joints under 2 mm or over 20 mm, expansion joints, wet or heavily deforming substrates, surfaces requiring full waterproofing or chemical resistance.
Do you need full waterproofing or chemical resistance? The Fugalite Color epoxy grout – available in the same 50 colors.
Frequently asked questions
How is resin-cement grout different from traditional grout?
Cement grout absorbs water. The color fades. Efflorescence appears – especially in dark colors. The resin-cement hybrid is water-repellent. The resin locks in the pigment and prevents efflorescence. A grout that lasts.
What colors are available for grout, silicone, and epoxy grout?
50 colors from the Color Fill palette. The same shades are available in In Silicone Color silicone and the In Fugalite Color epoxy grout. One color – three products. No other manufacturer offers such a range.
Which grout should I use for pools?
Fugabella Color is suitable for pools, baths, fountains. Wait before filling with water: ≈ 3 days. Check the water type and planned chemical treatment beforehand.
Is the color durable outdoors?
Out of 50 colors, 46 achieve a 4.5–5 GSc rating – this means high color fastness, tested by CATAS (500 hours Daylight). KK 30 and KK 114 may fade outdoors (3.5 GSc). These are for indoor use.
Is it suitable for natural stone and ceramics?
Yes, for both. For natural stone or contrasting colors, make a preliminary test. Cleaning microporous surfaces can be difficult.
When is it worth mixing with Fugaflex Eco?
For wooden ceilings. With increased thermal expansion. Before sanding. To prevent color bleeding in dark shades. Replace part of the mixing water with Fugaflex Eco latex. Important: Fugaflex Eco is cream-colored. In dark shades, the grout color may lighten slightly. Make a test grout.
Fugabella Color or Fugalite Color – which should I choose?
Fugabella Color is a resin-cement. Easy to work with. Suitable for general indoor and outdoor use. Fugalite Color is epoxy. Fully waterproof, chemical resistant. Industrial kitchens, laboratories, permanent water immersion. All 50 colors are available in both products.
Can I grout it myself?
Yes. With a rubber float, diagonally to the tiles. The mixture must be used within 45 minutes (+23 °C). Start cleaning immediately as the grout begins to harden. Clean sponge, circular motions, clean water. See detailed cleaning steps in the Application Areas section.
How do I clean the surface after grouting?
Start as soon as the grout begins to harden. Clean water, large sponge, circular motions, diagonal direction. Change water frequently – cloudy water leaves stains. For large areas, an electric sponge cleaning machine is recommended.
How much material is needed?
Depends on tile size, grout width, and layer thickness. Example: 30×60 cm tile, 3 mm grout, 10 mm thickness → ≈ 285 g/m². The full consumption table is available in the technical data sheet.
Color Fill
Color Fill offers 50 colors. In grout, epoxy grout, and silicone. The same shade in three products. No other manufacturer offers such a range.
The color codes of Fugabella Color, Fugalite Color, and Silicone Color match. The designer specifies with one code. The color is consistent throughout – grout, silicone joint, corner seal.
Color Fill matches the shade 150 Piero Lissoni from the Kerakoll Color Collection. One color code from wall to floor, grout, and silicone.
