Do you have a question? Call +3670 400 2040 or email hello@masterworks.hu 🇭🇺
Brand: Kerakoll 🇮🇹
Ready-to-use tile adhesive for indoor walls and floors
Tiling a bathroom or kitchen, but fed up with the dust and mixing? This adhesive is ready to use: apply it straight from the bucket. Tiles do not slip on walls, and there’s time to adjust them. It bonds to plasterboard, gypsum and particleboard, too. Leftovers keep in the sealed bucket until the next job. This is Kerakoll Pragma Ready.
| Characteristic | Value |
|---|---|
| Type | Tile adhesives; ready-to-use paste tile adhesive for interior walls and floors |
| Composition | White organic paste; ready to use |
| Performance | D2 TE (EN 12004); ≥ 30 minutes open time (+23 °C); EC1 Plus |
| Consumption | 2–10 mm adhesive bed ≈ 1.5–5 kg/m² 17 kg ≈ 3–11 m² |
| Packaging | 17 kg bucket |
| Storage | 24 months |
Substrates: Cement screeds; cement, gypsum and synthetic marble plaster; plasterboard, gypsum block panels, cement boards, cellular concrete panels; precast and cast-in-place concrete; gypsum and anhydrite without primer; particleboard, plywood.
Suitable coverings: Porcelain stoneware tiles, extra-thin porcelain stoneware slabs, ceramic tiles, clinker, terracotta, glass and ceramic mosaics; natural stone and marble that will not deform due to moisture absorption or become stained; insulating and sound-dampening boards.
Areas: Interior use only, walls and floors; bathrooms, showers, kitchens; homes, shops, industrial spaces.
| Layer | Product | Role |
|---|---|---|
| Perimeter joint | Tapetex | Compressible strip along the walls; structural and movement joints must be maintained |
| Bonding | Pragma Ready — this product | Ready-mixed paste adhesive bed; ready for foot traffic after ≈ 24 hours (+23 °C) |
| Grouting | Fugabella Color | Decorative epoxy-cement grout for ceramic tiles, mosaics, and stone |
| Movement joint | Silmat Color / Silicone Color | Flexible sealant for movement and perimeter joints |
| Application | Product | Classification |
|---|---|---|
| Porous ceramic tiles and mosaics on highly absorbent cement substrates, for walls and floors | Super Bio | C1 E |
| Thick ceramic tiles on walls, laid from top to bottom or diagonally, without slipping | Special Eco | C1 TE |
| Porcelain stoneware, ceramic tiles, and stone for walls and floors; also for plasterboard and indoor waterproofing; not for tiling over existing tiles | Biofix | C2 TE |
| Tiling over existing tiles, underfloor heating, terraces, pools; ≥ 60 minutes open time (+23 °C); also for rigid wood and metal after priming | Bioflex | C2 TE |
| Deformable bonding: large-format tiles, façades, underfloor heating, terraces, pools | Bioflex S1 | C2 TE S1 |
| Fast turnaround: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for façades and pools | Biofast | C2F TE |
| General-purpose wall and floor tiling, indoors and outdoors; underfloor heating, terraces, pools | Pragma Flex | C2 TE |
| Deformable bonding: large-format tiles, tiling over existing tiles, façades, terraces, pools, saunas | Pragma Pro S1 | C2 TE S1 |
| Fast turnaround, also for tiling over existing tiles: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); terraces, pools | Pragma Rapid | C2F TE |
| Ready-to-use paste: indoor floors, indoor and outdoor walls, plasterboard and wood-based panels | Elastik Eco | D2 TE |
| Ready-to-use paste for indoor use only: bathrooms, showers, kitchens; for gypsum and anhydrite without primer | Pragma Ready — this product | D2 TE |
| Variable-consistency gel (fluid on floors, thixotropic on walls): tiles up to 160×320 cm, underfloor heating, terraces, pools | H40 Gel | C2 TE S1 |
| Fast-setting deformable gel: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for large-format tiles | H40 Advanced | C2F TE S1 |
| Highly flexible gel: façades, large-format tiles reinforced with fabric, stable but cracked substrates | H40 Tech | C2 TE S2 |
| Two-component reactive gel: metal, wood, PVC and rubber flooring, thick epoxy and polyurethane coatings; underfloor heating with aluminium foil, without screed | H40 Extreme | R2 T |
| Two-component flexible adhesive: after cleaning, for wood, metal, rubber, PVC, linoleum; XPS, EPS; moisture-sensitive, stain-prone stone | Pragma Duo | R2 T |
Classification according to EN 12004: C = cementitious, D = dispersion (paste), R = reactive; 1 = basic, 2 = higher adhesion; F = fast-setting; T = reduced slip (maximum 0.5 mm on walls); E = extended open time; S1 = deformable, S2 = highly deformable.
| Product | Best for this | Not suitable for this |
|---|---|---|
| Pragma Flex | General-purpose tiling on rigid substrates: walls and floors, indoor and outdoor, underfloor heating, terraces, pools | For wood, metal, plastic, and deformable substrates; for existing floor coverings only after priming |
| Pragma Pro S1 | Deformable (S1) bonding: large-format tiles, tiling over existing tiles, façades, saunas, industrial spaces | For wood, metal, plastic and substrates exposed to vibration |
| Pragma Rapid | Fast handover: walkable and ready for grouting after ≈ 3 hours (+23 °C) | For wood, metal, plastic and deformable substrates; shorter pot life than Pragma Flex and Pro S1: ≥ 1 hour (+23 °C) |
| Pragma Duo | Deformable or non-absorbent substrates: after cleaning, wood, metal, rubber, PVC, linoleum; XPS, EPS; water-sensitive, stain-prone stone | For substrates that are not completely dry or are prone to dampness |
| Pragma Ready — this product | No mixing, for interior use: bathrooms, showers, kitchens; gypsum, anhydrite, particleboard | For exterior use, pools and permanently wet areas |
What they all have in common: porcelain stoneware, ceramic and natural stone tiles for walls and floors; no tile slip on walls (T, no more than 0.5 mm); very low emissions (EC1 Plus).
Is there a tile adhesive that can be used without mixing?
Yes, this is a ready-to-use paste adhesive: no need to mix with water, just stir it in the bucket. Apply directly to the substrate with a notched trowel. For interior walls and floors.
How much adhesive do I need per m²?
≈ 1.5–5 kg/m², depending on the tile and notched trowel size. So one 17 kg bucket covers ≈ 3–11 m².
How long until it is walkable and ready for grouting?
At +23 °C, it is walkable after ≈ 24 hours. It can be grouted after ≈ 12 hours on walls and ≈ 24 hours on floors. It can be put into full use after ≈ 7 days.
Is it suitable for showers and bathrooms?
Yes, for indoor wet areas: bathrooms, showers and kitchens. Not for permanently wet areas or pools.
What does the D2 TE classification mean?
D2 TE is a classification for tile adhesives under the EN 12004 standard. D2: dispersion (paste) adhesive with higher adhesion. T: on walls, tiles slip by no more than 0.5 mm; E: extended open time.
Pragma Ready or Pragma Flex?
Pragma Ready needs no mixing and is for interior use only. For exterior use, terraces and pools, use the powder-mixed Pragma Flex. For metal, PVC, rubber and substrates subject to deformation, use Pragma Duo.
Is primer needed on gypsum or anhydrite?
No primer is needed. The substrate must be completely dry and single-layer, without weakly bonded fine plaster.
Can I tile over old tiles?
No. It cannot be used on non-absorbent substrates, such as old tiles, with low-absorption tiles. For tiling over old tiles, use Pragma Pro S1.
Pragma Ready or Elastik Eco?
Both are ready-to-use pastes with a D2 TE classification. For exterior walls, use Elastik Eco. Pragma Ready is for interior use only, on gypsum and anhydrite, without primer.
What should I do with the opened bucket?
When sealed with the original lid, it will keep until the next job. Protect from frost and store above +5 °C.
Substrate: Level and dry, free of dust, oil, grease, moisture and loose material. Fill any uneven areas with smoothing compound first.
Priming: No primer is needed on gypsum or anhydrite. The substrate must be completely dry, with no single-layer, weakly bonded fine plaster.
Preparation: Ready to use; do not mix with water. Before use, stir thoroughly in the bucket to achieve a uniform consistency.
Application: Apply directly to the substrate with a notched trowel; use enough adhesive to fully cover the back of the tile. Set the tile into fresh adhesive, pressing it down; check that the adhesive has not skinned over. Ceramic tiles do not need to be soaked, but must be free of dust and dirt. Maintain structural, movement and perimeter joints.
Waiting times (+23 °C): Pot life ≥ 45 minutes, open time ≥ 30 minutes, adjustment time ≥ 1 hour. Walkable after ≈ 24 hours; groutable after ≈ 12 hours on walls and ≈ 24 hours on floors. Ready for use after ≈ 7 days.
Conditions: Between +10 °C and +35 °C. Protect from frost. Temperature, ventilation, substrate absorbency and tile type affect the working and setting times.
Cleaning: Before the adhesive hardens, remove it from tools and the covering with water.
Entrust the professional execution of Kerakoll products to an expert!
The proper application of Kerakoll building materials and trade products requires special expertise for durable, excellent results. Our company’s trained professionals guarantee compliant execution and long-term quality.
Our comprehensive service includes:
Why choose us?
Request a material + labor package offer! The professional application of Kerakoll products ensures optimal performance and long service life. Don’t take risks – proper execution is at least as important as quality raw materials!
Please contact us for a price quote at hello@masterworks.hu or call +3670 400 2040.
*Data measured at +23 °C and 50% relative humidity, without ventilation. Site conditions and the absorbency of the substrate and tiles may affect these values.*
Our online store is open 24/7 and ships Monday through Friday, except for some holidays. Orders received for products without delivery restrictions on the product page will be delivered within 1-3 days if received before 12:00 p.m. In the case of orders placed for products in the suppliers' warehouses, the expected availability time is indicated on the product page, and we deliver according to the indicated time.
In order to provide the best service, we try to keep a stock of the most popular products in our warehouse in Budapest. Such products are labeled "In Stock". These can be collected or delivered within 1-3 days.
All other products must be shipped from the supplier's warehouses. This can take 1-4 weeks (it depends on the manufacturer; please confirm the delivery time with our customer service before ordering). Such products are either marked "In Stock" or require a pre-order together with a request for a quote.
All prices include VAT.
Products available in our warehouse are delivered within 1-3 business days. Products not available in our warehouse are first shipped from the manufacturer's warehouse to ours, and then to you; this may take 1-4 weeks.
Available shipping methods in Hungary
We ship internationally only based on a custom shipping quote. If you have any questions, contact us at hello@masterworks.hu, +36 70 400 2040.
Would you like to request a quote or speak with our Kerakoll product specialist?
+36 70 400 2040 · hello@masterworks.hu
We also offer installation services. Request a package quote for materials + labor!
- Easy to apply, ready to use without mixing
- Solvent-free
- For interior walls and floors, including wet areas
- Paste adhesive with high bond strength: D2 TE (EN 12004)
- White paste in a resealable 17 kg bucket
- Very low emissions: EC1 Plus, French A+ rating
Tile adhesives for porcelain tiles, ceramic tiles, and natural stone
Pragma was born from Kerakoll’s experience: a family of adhesives developed to simplify the day-to-day work of tilers and construction companies. Mineral and organic adhesives for a wide range of applications – all in one easy-to-navigate product range.
Practical, certified, safe
Practicality: a clear product range that is easy to choose from and simple to use.
Quality: high bond strength, durability and ease of application.
Safety: low VOC emissions and better indoor air quality – for both the installer and the people using the rooms.
In a world where sustainable building materials and eco-friendly practices are becoming increasingly important, Kerakoll is a pioneer in the industry.
Founded in 1968, the Italian company has become a global leader in the manufacture of adhesives, sealants, and other building materials, while remaining committed to protecting the environment.
+3670 400 2040
hello@masterworks.hu
Showroom
23 Radnóti Miklós Street
1137 Budapest
Route
Warehouse
GSP warehouse
1 Dávid Schwarz Street
2220 Vecsés
Route
© 2026, Masterworks Hungary
Green building. Interior design.