Kerakoll Pragma Rapid fast-setting tile adhesive

Brand: Kerakoll 🇮🇹

Tile adhesive for fast handover, with same-day grouting

Price
26.850 Ft
Unit price 1.074 Ft  per  kg
Color:White
Size:25 kg (≈ 4–10 m²)
In stock with the supplier, lead time 3-5 days.
Do you have a question?
Our Kerakoll specialist will help you choose the right product.

Need to walk on the renovated floor tomorrow? There’s no time to wait days before grouting. This adhesive sets quickly, so the tiles can be grouted the same day. Yet there’s still time to adjust them into place. It’s also suitable for terraces and swimming pools. This is Kerakoll Pragma Rapid.

  • Fast handover: walkable and ready for grouting after ≈ 3 hours; walls can be grouted after ≈ 2 hours (+23 °C) — for urgent renovations and shops
  • Time to adjust: ≥ 30 minutes open time (+23 °C), even with rapid bonding — ideal when many cuts are needed
  • Suitable for swimming pools too: can be filled after ≈ 7 days (+23 °C) — for pools and fountains
  • Performs indoors and out: adhesion remains ≥ 1 N/mm² after heat exposure, water immersion and freeze-thaw cycles — for terraces and balconies
  • Withstands heat and frost: temperature resistance from −40 °C to +90 °C — for underfloor heating and outdoor tiling
  • Tile over without removal: bonds to existing floor coverings too — for bathroom and kitchen renovations
  • Kind to indoor air: very low emissions (EC1 Plus, French A+ rating) — for homes and offices
Feature Value
Type Tile adhesives; fast-setting mineral tile adhesive for walls and floors (indoors and outdoors)
Composition Pre-mixed mineral powder, to be mixed with water; white or grey
Performance C2F TE (EN 12004); walkable after ≈ 3 hours (+23 °C); EC1 Plus
Consumption 2–15 mm bed
≈ 2.5–6 kg/m²
25 kg ≈ 4–10 m²
Packaging 25 kg bag
Storage 12 months

Suitable for

Substrates: Cement screed and mortar, cement plaster, interior aerated concrete blocks; plasterboard and fibre-cement boards (rigidly fixed to a metal frame); existing floor coverings, underfloor heating. After Active Prime Fix or Active Prime Grip: anhydrite screed, gypsum plaster.

Suitable coverings: Porcelain stoneware, ceramic tiles, terracotta, clinker, marble and natural stone, mosaics; interior thermal and sound insulation boards.

Areas: Walls and floors, indoors and outdoors; homes, shops; terraces, balconies; swimming pools, fountains; street furniture; boats.

Not suitable for:

  • On wood, metal, plastic or resilient flooring — Pragma Duo is suitable here
  • On deformable or vibration-prone substrates; smooth precast concrete
  • On uncured, shrinking screed, plaster or concrete
  • On organic reactive waterproofing
  • To fill unevenness greater than 15 mm

The Kerakoll tiling system

Layer Product Role
Perimeter joint Tapetex Compressible strip along walls; structural and movement joints must be maintained
Priming — only if needed Active Prime Fix / Active Prime Grip Required for anhydrite and gypsum plaster; recommended for highly absorbent cement substrates
Bonding Pragma Rapid — this product Fast-setting adhesive bed; walkable and ready for grouting after ≈ 3 hours (+23 °C)
Grouting Fugabella Color; for pools, Fugalite Color Decorative epoxy-cement grout for ceramics, mosaics and stone; epoxy grout for pools
Movement joint Silmat Color / Silicone Color Flexible sealing for movement and perimeter joints

Which tile adhesive do you need? — Tile adhesives

Application Product Classification
Porous ceramic tiles and mosaics on highly absorbent cement substrates, for walls and floors Super Bio C1 E
Thick ceramic tiles on walls, laid from top to bottom or diagonally, without slipping Special Eco C1 TE
Porcelain tiles, ceramic and stone for walls and floors, also on plasterboard and interior waterproofing; not for existing tiles Biofix C2 TE
Overtiling, underfloor heating, terraces, pools; ≥ 60 minutes open time (+23 °C); also on rigid wood and metal after priming Bioflex C2 TE
Deformable bonding: large-format tiles, façades, underfloor heating, terraces, pools Bioflex S1 C2 TE S1
Fast return to service: walkable and ready for grouting after ≈ 3 hours (+23 °C); also for façades and pools Biofast C2F TE
General tiling on walls and floors, indoors and outdoors; underfloor heating, terraces, pools Pragma Flex C2 TE
Deformable bonding: large-format tiles, overtiling, façades, terraces, pools, saunas Pragma Pro S1 C2 TE S1
Fast return to service, including overtiling: walkable and ready for grouting after ≈ 3 hours (+23 °C); terraces, pools Pragma Rapid — this product C2F TE
Ready-to-use paste: indoor floors, interior and exterior walls, plasterboard and wood-based boards Elastik Eco D2 TE
Ready-to-use paste for indoor use only: bathrooms, showers, kitchens; on gypsum and anhydrite without primer Pragma Ready D2 TE
Variable-consistency gel (fluid on floors, thixotropic on walls): tiles up to 160×320 cm, underfloor heating, terraces, pools H40 Gel C2 TE S1
Fast-setting, deformable gel: walkable and ready for grouting after ≈ 3 hours (+23 °C); also for large-format tiles H40 Advanced C2F TE S1
Highly flexible gel: façades, large fabric-reinforced tiles, stable but cracked substrates H40 Tech C2 TE S2
Two-component reactive gel: metal, wood, PVC and rubber flooring, thick epoxy and polyurethane coatings; underfloor heating without screed, with aluminium foil H40 Extreme R2 T
Two-component flexible adhesive: wood, metal, rubber, PVC and linoleum after cleaning; XPS, EPS; water-sensitive, stain-prone stone Pragma Duo R2 T

Classification according to EN 12004: C = cementitious, D = dispersion (paste), R = reactive; 1 = basic, 2 = higher adhesion; F = fast-setting; T = reduced slip (no more than 0.5 mm on walls); E = extended open time; S1 = deformable, S2 = highly deformable.

Pragma Flex, Pro S1, Rapid, Duo or Ready?

Product Best for this Not for this
Pragma Flex General tiling on rigid substrates: walls and floors, indoors and outdoors, underfloor heating, terraces, pools For tile, metal, plastic and deformable substrates; on existing floor coverings only after priming
Pragma Pro S1 Deformable (S1) bonding: large-format tiles, tiling over existing tiles, façades, saunas, industrial spaces For wood, metal, plastic and substrates exposed to vibration
Pragma Rapid — this product For projects on a tight schedule: ready for foot traffic and grouting after ≈ 3 hours (+23 °C) For wood, metal, plastic and deformable substrates; shorter pot life than Pragma Flex and Pro S1: ≥ 1 hour (+23 °C)
Pragma Duo Deformable or non-absorbent substrates: wood, metal, rubber, PVC, linoleum after cleaning; XPS, EPS; water-sensitive, stain-prone stone For substrates that are not completely dry or are prone to damp
Pragma Ready No mixing required; for indoor use: bathrooms, showers, kitchens; gypsum, anhydrite, particleboard For outdoor use, swimming pools and permanently wet areas

What they all have in common: porcelain stoneware, ceramic tiles and natural stone for walls and floors; tiles do not slip on walls (T, maximum 0.5 mm); very low emissions (EC1 Plus).

Frequently asked questions

How long before you can walk on a newly tiled floor?
With fast-setting adhesive, after a few hours. With Pragma Rapid, the floor is ready for foot traffic and grouting after ≈ 3 hours (+23 °C). On walls, grouting can start after ≈ 2 hours (+23 °C).

How much tile adhesive do I need per m²?
≈ 2.5–6 kg/m², depending on the tile and notched trowel. A 25 kg bag is therefore enough for ≈ 4–10 m².

How long can mixed adhesive be used?
Pot life is ≥ 1 hour, and open time is ≥ 30 minutes (+23 °C). It is best to mix only as much as you can use within an hour. Temperature and ventilation affect these times.

What does the C2F TE classification mean?
C2F TE is a classification for tile adhesives under the EN 12004 standard. C2: cementitious, with higher adhesion; F: fast-setting. T: the tile does not slip on the wall; E: extended open time.

Pragma Rapid or Pragma Flex?
Choose Pragma Rapid when the project is on a tight schedule. If you have more time, Pragma Flex has a longer pot life: ≥ 3 hours (+23 °C). For deformable bonding, use Pragma Pro S1.

Can you tile over old tiles without removing them?
Yes, it also bonds to existing floor coverings. The old covering must be level, intact, sound, dry and clean.

Can it be used on terraces and in swimming pools?
Yes, it can also be used on terraces, balconies, swimming pools and fountains. Outdoors, full-bed application is required, and it must be protected from heavy rain for at least 6 hours. The pool can be filled after ≈ 7 days (+23 °C).

Is it suitable for floors with underfloor heating?
Yes, it is also suitable for underfloor heating. It withstands temperatures from −40 °C to +90 °C. Expansion joints must be maintained.

Can you tile over wood or metal?
Pragma Rapid cannot be used on wood, metal, plastic or resilient floor coverings. For these, the two-component Pragma Duo is suitable after cleaning.

Downloads

Instructions for use

Substrate: Flat, cured, sound, compact, rigid, dry, clean, and not subject to rising damp. Plasterboard and fibre-reinforced cement board must be rigidly fixed to a metal frame.

Priming: Highly absorbent cement substrates should be dampened or primed with one coat of Active Prime Fix or Active Prime Grip primer. Anhydrite screeds and gypsum plaster can only be tiled after priming.

Mixing: For a 25 kg bag, use ≈ 7 l of water for grey and ≈ 6.7 l for white. The water quantity shown on the bag is indicative; a thicker, non-flowing (thixotropic) mix can also be prepared as required. Only mix as much as can be used within the pot life.

Application: Use a notched trowel suited to the tile format, applying the adhesive bed to cover the entire back of the tile. Tiles larger than 60 cm and thin tiles may also require adhesive on the back. Check coverage with a test tile. Outdoors, always use full coverage. Structural, expansion and perimeter joints must be maintained.

Waiting times (+23 °C): Pot life ≥ 1 hour, open time ≥ 30 minutes. Ready for foot traffic and grouting after ≈ 3 hours; on walls, ready for grouting after ≈ 2 hours. Light traffic after ≈ 6–16 hours, heavy traffic after ≈ 24–28 hours; swimming pools can be filled after ≈ 7 days.

Conditions: Between +5 °C and +35 °C. Protect from heavy rain for at least 6 hours. Temperature, ventilation, substrate absorbency and tile properties affect application and setting times.

Special cases: For marble and natural stone, testing or consultation with Kerakoll Global Service is essential. Stones with a reinforcing layer (resin, polymer mesh) or treated backs must be tested first. Remove stone dust left from cutting. Polymer tiles and bituminous or tar membranes must first be covered with a screed. Insulating and soundproofing boards must be bonded according to the manufacturer's instructions.

Cleaning: Fresh adhesive can be removed from tools and surfaces with water; once hardened, it can only be removed mechanically.

We also provide installation services.

Entrust the professional execution of Kerakoll products to an expert!

The proper application of Kerakoll building materials and trade products requires special expertise for durable, excellent results. Our company’s trained professionals guarantee compliant execution and long-term quality.

Our comprehensive service includes:

  • Free on-site survey and condition assessment
  • Expert advice for selecting the right product and system
  • Professional surface preparation and priming
  • Professional application of the chosen Kerakoll products
  • Warranty on the execution

Why choose us?

  • Experienced, trained professionals
  • Several years of experience with the full Kerakoll product range
  • Reference projects in residential buildings, public buildings, and industrial facilities
  • Preliminary, detailed price quotation
  • Clean, precise workmanship

Request a material + labor package offer! The professional application of Kerakoll products ensures optimal performance and long service life. Don’t take risks – proper execution is at least as important as quality raw materials!

Please contact us for a price quote at hello@masterworks.hu or call +3670 400 2040.

Technical specifications
  • Product type: quick-setting, mineral tile adhesive for porcelain stoneware, ceramic tiles and natural stone; non-sag on vertical surfaces
  • Appearance: white or grey premixed powder
  • Classification: C2F TE — EN 12004
  • Mixing water (EN 12004-2): grey ≈ 27% by weight; white ≈ 32.5% by weight
  • Mixing water for application: grey ≈ 7 l / 25 kg; white ≈ 6.7 l / 25 kg
  • Layer thickness: 2–15 mm
  • Application temperature: +5 °C – +35 °C
  • Pot life: ≥ 1 hour
  • Open time: ≥ 30 minutes — EN 12004-2
  • Ready for foot traffic and grouting: ≈ 3 hours
  • Ready for grouting on walls: ≈ 2 hours
  • Ready for use (+23 °C / +5 °C): light traffic ≈ 6–16 hours; heavy traffic ≈ 24–28 hours; swimming pool ≈ 7 days
  • Consumption: ≈ 2.5–6 kg/m²
  • Shear strength (porcelain stoneware/porcelain stoneware, 28 days): ≥ 1 N/mm² — ANSI A-118.4
  • Adhesion strength (concrete/porcelain stoneware, 28 days): ≥ 1 N/mm² — EN 12004-2
  • Adhesion after heat exposure, water immersion and freeze-thaw cycles: ≥ 1 N/mm² — EN 12004-2
  • Vertical slip: ≤ 0.5 mm — EN 12004-2
  • Temperature resistance: −40 °C – +90 °C
  • Emissions: EC 1 plus GEV-Emicode (GEV 23479/11.01.02); French A+ rating
  • Packaging: 25 kg bag
  • Storage: ≈ 12 months from production date, in intact original packaging, protected from moisture

*Data measured at +23 °C and 50% relative humidity without ventilation. Site conditions, substrate and tile absorbency may affect these values.*

Stock and prices

Our online store is open 24/7 and ships Monday through Friday, except for some holidays. Orders received for products without delivery restrictions on the product page will be delivered within 1-3 days if received before 12:00 p.m. In the case of orders placed for products in the suppliers' warehouses, the expected availability time is indicated on the product page, and we deliver according to the indicated time.

In order to provide the best service, we try to keep a stock of the most popular products in our warehouse in Budapest. Such products are labeled "In Stock". These can be collected or delivered within 1-3 days.

All other products must be shipped from the supplier's warehouses. This can take 1-4 weeks (it depends on the manufacturer; please confirm the delivery time with our customer service before ordering). Such products are either marked "In Stock" or require a pre-order together with a request for a quote.

All prices include VAT.

Shipping information

Shipping

Products available in our warehouse are delivered within 1-3 business days. Products not available in our warehouse are first shipped from the manufacturer's warehouse to ours, and then to you; this may take 1-4 weeks.

Available shipping methods in Hungary

  • GLS courier service – up to 120 kg total weight. The fee is calculated automatically based on the weight of your cart (HUF 4,200–25,200) and added to your order at checkout. Orders are dispatched on the business day after they are placed and delivered within 1-3 business days.
  • Request a shipping quote – for products in 18/25 kg bags, orders over 120 kg, or orders to international destinations. The courier service does not deliver bagged (powder) products; individual shipping or personal pickup can be selected for these. The “Request a shipping quote” line shown at checkout is a nominal amount (HUF 100), not the shipping fee: we will email you a quote for the actual fee within 1 business day, and delivery will begin once you accept it.
  • Personal pickup – free of charge, at our warehouse or showroom (1137 Budapest, Radnóti Miklós u. 23.), upon presentation of the confirmation email.

We ship internationally only based on a custom shipping quote. If you have any questions, contact us at hello@masterworks.hu, +36 70 400 2040.

REQUEST A QUOTE

Would you like to request a quote or speak with our Kerakoll product specialist?

+36 70 400 2040 · hello@masterworks.hu

We also offer installation services. Request a package quote for materials + labor!

Kerakoll Pragma Rapid fast-setting tile adhesive

PRODUCT BENEFITS

- Non-irritating
- Accelerated adhesion: walkable after ≈ 3 hours (+23 °C)
- Extended working time: ≥ 30 minutes open time
- Fast-setting, high-adhesion: C2F TE (EN 12004)
- Suitable for indoor and outdoor use, including terraces and swimming pools
- Very low emissions: EC1 Plus, French A+ rating

Kerakoll Pragma csemperagasztó felhordása fogazott glettvassal – ragasztóágy greslap és kerámia burkolólap alá

WHAT IS PRAGMA?

Tile adhesives for porcelain tiles, ceramic tiles, and natural stone

Pragma was born from Kerakoll’s experience: a family of adhesives developed to simplify the day-to-day work of tilers and construction companies. Mineral and organic adhesives for a wide range of applications – all in one easy-to-navigate product range.

Fogazott glettvassal húzott Kerakoll Pragma csemperagasztó-ágy padlóburkoláshoz

WHY PRAGMA?

Practical, certified, safe

Practicality: a clear product range that is easy to choose from and simple to use.
Quality: high bond strength, durability and ease of application.
Safety: low VOC emissions and better indoor air quality – for both the installer and the people using the rooms.

Kerakoll - The GreenBuilding Company

About Kerakoll

In a world where sustainable building materials and eco-friendly practices are becoming increasingly important, Kerakoll is a pioneer in the industry.

Founded in 1968, the Italian company has become a global leader in the manufacture of adhesives, sealants, and other building materials, while remaining committed to protecting the environment.

Similar products