Do you have a question? Call +3670 400 2040 or email hello@masterworks.hu 🇭🇺
Brand: Kerakoll 🇮🇹
Flexible tile adhesive for large-format tiles, over existing tiles
Does a large tile sound hollow or crack on the floor? The situation is even trickier when tiling over old tiles. This adhesive flexes to accommodate movement and keeps tiles from slipping on walls. It’s also suitable for façades, terraces, pools and saunas. This is Kerakoll Pragma Pro S1.
| Feature | Value |
|---|---|
| Type | Tile adhesives; deformable mineral tile adhesive for walls and floors (indoors and outdoors) |
| Composition | Mineral pre-mixed powder, to be mixed with water; white or grey |
| Performance | C2 TE S1 (EN 12004); ≥ 30 minutes open time (+23 °C); EC1 Plus |
| Consumption | 2–15 mm bed ≈ 2.5–6 kg/m² 25 kg ≈ 4–10 m² |
| Packaging | 25 kg bag |
| Storage | 12 months |
Substrates: Cement screed and mortar, lime and cement plaster, concrete, autoclaved aerated concrete; plasterboard and fibre-reinforced cement board (rigidly fixed to a metal frame), panel systems, insulating panels; existing floor coverings, waterproofing, underfloor heating. After applying Active Prime Fix or Active Prime Grip: gypsum, anhydrite.
Suitable coverings: Porcelain stoneware, large-format tiles, ceramic tiles, terracotta, clinker, marble and natural stone, mosaics; insulating and sound-insulating panels.
Applications: Walls and floors, indoors and outdoors; residential, commercial and industrial spaces; façades, terraces, balconies; swimming pools, fountains; saunas, wellness areas; street furniture.
| Layer | Product | Role |
|---|---|---|
| Perimeter joint | Tapetex | Compressible strip along walls; structural and expansion joints must be maintained |
| Priming — only if needed | Active Prime Fix / Active Prime Grip | Required under gypsum and anhydrite; recommended on highly absorbent cement substrates |
| Waterproofing — only if needed | Cement-based waterproofing, e.g. Aquastop Nanoflex (cement-based waterproofing products) | In wet rooms, on terraces and in swimming pools; not over organic reactive waterproofing |
| Bonding | Pragma Pro S1 — this product | Deformable adhesive bed; ready for foot traffic and grouting after ≈ 24 hours (+23 °C) |
| Grouting | Fugabella Color; for swimming pools, Fugalite Color | Decorative resin-cement grout for ceramics, mosaics and stone; epoxy grout for swimming pools |
| Movement joint | Silmat Color / Silicone Color | Flexible sealant for movement and perimeter joints |
| Application | Product | Classification |
|---|---|---|
| Porous ceramic tiles and mosaics on highly absorbent cement substrates, on walls and floors | Super Bio | C1 E |
| Thick ceramic tiles on walls, laid top-down or diagonally, without slipping | Special Eco | C1 TE |
| Porcelain tiles, ceramics and stone on walls and floors, including plasterboard and interior waterproofing; not for existing tiles | Biofix | C2 TE |
| Tile-on-tile installation, underfloor heating, terraces, swimming pools; ≥ 60 minutes open time (+23 °C); also for rigid wood and metal after priming | Bioflex | C2 TE |
| Deformable bonding: large-format tiles, facades, underfloor heating, terraces, swimming pools | Bioflex S1 | C2 TE S1 |
| Fast handover: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for facades and swimming pools | Biofast | C2F TE |
| General-purpose tiling for walls and floors, indoors and outdoors; underfloor heating, terraces, swimming pools | Pragma Flex | C2 TE |
| Deformable bonding: large-format tiles, tile-on-tile installation, facades, terraces, swimming pools, saunas | Pragma Pro S1 — this product | C2 TE S1 |
| Fast handover, including tile-on-tile installation: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); terraces, swimming pools | Pragma Rapid | C2F TE |
| Ready-to-use paste: interior floors, interior and exterior walls, plasterboard and wood-based boards | Elastik Eco | D2 TE |
| Ready-to-use paste for interior use only: bathrooms, showers, kitchens; for gypsum and anhydrite without primer | Pragma Ready | D2 TE |
| Variable-consistency gel (fluid on floors, thixotropic on walls): tiles up to 160×320 cm, underfloor heating, terraces, swimming pools | H40 Gel | C2 TE S1 |
| Fast-setting, deformable gel: ready for foot traffic and grouting after ≈ 3 hours (+23 °C); also for large-format tiles | H40 Advanced | C2F TE S1 |
| Highly flexible gel: facades, large-format mesh-reinforced tiles, stable but cracked substrates | H40 Tech | C2 TE S2 |
| Two-component reactive gel: metal, wood, PVC and rubber flooring, thick epoxy and polyurethane coatings; underfloor heating with aluminum foil, without screed | H40 Extreme | R2 T |
| Two-component flexible adhesive: after cleaning, for wood, metal, rubber, PVC, linoleum; XPS, EPS; water-sensitive, stain-prone stone | Pragma Duo | R2 T |
Classification according to EN 12004: C = cementitious, D = dispersion (paste), R = reactive; 1 = basic, 2 = increased adhesion; F = fast-setting; T = reduced slip (maximum 0.5 mm on walls); E = extended open time; S1 = deformable, S2 = highly deformable.
| Product | Best for this | Not for this |
|---|---|---|
| Pragma Flex | General tiling on rigid substrates: walls and floors, indoors and outdoors, underfloor heating, terraces, pools | For wood, metal, plastic and deformable substrates; only for existing flooring after priming |
| Pragma Pro S1 — this product | Deformable (S1) bonding: large-format tiles, tiling over existing surfaces, façades, saunas, industrial areas | For wood, metal, plastic and substrates exposed to vibration |
| Pragma Rapid | For urgent handover: walkable and groutable after approximately 3 hours (+23 °C) | For wood, metal, plastic and deformable substrates; pot life is shorter than that of Pragma Flex and Pro S1: ≥ 1 hour (+23 °C) |
| Pragma Duo | Deformable or non-absorbent substrates: after cleaning, wood, metal, rubber, PVC, linoleum; XPS, EPS; water-sensitive, staining-prone stone | For substrates that are not completely dry or are becoming damp |
| Pragma Ready | No mixing required; for indoor use: bathrooms, showers and kitchens; gypsum, anhydrite, chipboard | For outdoor use, swimming pools and permanently wet areas |
Common to all: porcelain stoneware, ceramic and natural stone tiles for walls and floors; tiles do not slip on walls (T, maximum 0.5 mm); very low emissions (EC1 Plus).
Why does a large-format tile crack or come loose from the floor?
Often, the adhesive bed beneath it is incomplete, or the adhesive cannot accommodate movement in the substrate. Large-format tiles require full bedding and a deformable adhesive. For tiles over 60 cm, adhesive may also be needed on the back.
How much tile adhesive is needed per m²?
Approximately 2.5–6 kg/m², depending on the tile and notched trowel. A 25 kg bag is enough for approximately 4–10 m².
How long until it can be walked on and grouted?
At +23 °C, after approximately 24 hours. It can be grouted on walls after approximately 12 hours. Swimming pools can be filled after approximately 14 days.
What does the C2 TE S1 classification mean?
C2 TE S1 is the classification of tile adhesives under the EN 12004 standard. C2 TE: cementitious, high-adhesion adhesive that does not slip on walls and has an extended open time. S1: deformable, with transverse deformation ≥ 2.5 mm.
Pragma Pro S1 or Pragma Flex?
Use Pragma Pro S1 for large-format tiles, façades or tiling over existing surfaces where a deformable adhesive is needed. Pragma Flex is for general tiling where a deformable adhesive is not required. Both require a rigid, sound substrate.
Can you tile over old tiles without removing them?
Yes, it can also be used to tile over existing flooring. The old flooring must be level, intact, sound, dry and clean.
Can it also be used on façades?
Yes. The substrate must have a cohesive strength of at least 1.0 N/mm², and adhesive must also be applied to the back of the tile. For tiles with sides longer than 30 cm, the designer decides whether mechanical fixing is needed.
Is it also suitable for terraces, pools and saunas?
Yes, it is also suitable for terraces, balconies, swimming pools, fountains, saunas and wellness areas. Outdoors, full bedding is required. Protect it from heavy rain for at least 24 hours.
Is it also suitable for floors with underfloor heating?
Yes, it is also suitable for underfloor heating. The substrate must be cured and dry. Expansion joints must be maintained.
Can you tile over wood or metal?
Pragma Pro S1 cannot be used on wood, metal, plastic or resilient flooring. For these materials, use the two-component Pragma Duo after cleaning.
Substrate: Flat, cured, sound, compact, rigid, dry, clean, and not subject to rising damp. Gypsum board and fibre-reinforced cement board must be rigidly fixed to a metal frame.
Priming: Highly absorbent cement substrates should be dampened or coated with one layer of Active Prime Fix or Active Prime Grip primer. Gypsum and anhydrite substrates may only be tiled after priming.
Mixing: For a 25 kg bag, use approximately 7 l of water for the grey product and 6.9 l for the white product. The amount of water indicated on the bag is a guide; a thicker, non-flowing (thixotropic) mix can also be prepared as required.
Application: Use a notched trowel suited to the tile format, applying the adhesive so it covers the entire back of the tile. For tiles larger than 60 cm and thin tiles, adhesive may also need to be applied to the back. Check coverage using a test tile. Outdoors, always use full adhesive coverage. Structural, expansion, and perimeter joints must be maintained.
Facades: The substrate must have a cohesive strength of at least 1.0 N/mm². Apply adhesive to the back of the tile as well. For tiles with a side longer than 30 cm, the designer should consider safety mechanical fixings.
Waiting times (+23 °C): Pot life ≥ 3 hours, open time ≥ 30 minutes. Ready for foot traffic and grouting after approximately 24 hours; on walls, ready for grouting after approximately 12 hours. Light traffic after approximately 2–3 days, heavy traffic after approximately 3–7 days, and swimming pools after approximately 14 days.
Conditions: Between +5 °C and +35 °C. Protect from heavy rain for at least 24 hours. Temperature, ventilation, substrate absorbency, and tile properties affect working and setting times.
Special cases: For marble and natural stone, testing or consultation with Kerakoll Global Service is essential. For stone with a reinforcing layer (synthetic resin, polymer mesh) or a treated back, test first. Remove stone dust left from cutting. Polymer tiles and bituminous or tar-based membranes must first be covered with a screed. Insulating and soundproofing panels must be bonded according to the manufacturer's instructions.
Cleaning: Fresh adhesive can be removed from tools and surfaces with water; once hardened, it can only be removed mechanically.
Entrust the professional execution of Kerakoll products to an expert!
The proper application of Kerakoll building materials and trade products requires special expertise for durable, excellent results. Our company’s trained professionals guarantee compliant execution and long-term quality.
Our comprehensive service includes:
Why choose us?
Request a material + labor package offer! The professional application of Kerakoll products ensures optimal performance and long service life. Don’t take risks – proper execution is at least as important as quality raw materials!
Please contact us for a price quote at hello@masterworks.hu or call +3670 400 2040.
*Data measured at +23 °C and 50% relative humidity, without ventilation. Site conditions and the absorbency of the substrate and tile may affect these values.*
Our online store is open 24/7 and ships Monday through Friday, except for some holidays. Orders received for products without delivery restrictions on the product page will be delivered within 1-3 days if received before 12:00 p.m. In the case of orders placed for products in the suppliers' warehouses, the expected availability time is indicated on the product page, and we deliver according to the indicated time.
In order to provide the best service, we try to keep a stock of the most popular products in our warehouse in Budapest. Such products are labeled "In Stock". These can be collected or delivered within 1-3 days.
All other products must be shipped from the supplier's warehouses. This can take 1-4 weeks (it depends on the manufacturer; please confirm the delivery time with our customer service before ordering). Such products are either marked "In Stock" or require a pre-order together with a request for a quote.
All prices include VAT.
Products available in our warehouse are delivered within 1-3 business days. Products not available in our warehouse are first shipped from the manufacturer's warehouse to ours, and then to you; this may take 1-4 weeks.
Available shipping methods in Hungary
We ship internationally only based on a custom shipping quote. If you have any questions, contact us at hello@masterworks.hu, +36 70 400 2040.
Would you like to request a quote or speak with our Kerakoll product specialist?
+36 70 400 2040 · hello@masterworks.hu
We also offer installation services. Request a package quote for materials + labor!
- Easy to apply, smooth-working mix
- For large-format tiles and tile-on-tile applications
- Extended open time: ≥ 30 minutes (+23 °C)
- Deformable, high adhesion: C2 TE S1 (EN 12004)
- Also suitable for façades, terraces, swimming pools, and saunas
- Very low emissions: EC1 Plus, French A+ rating
Tile adhesives for porcelain tiles, ceramic tiles, and natural stone
Pragma was born from Kerakoll’s experience: a family of adhesives developed to simplify the day-to-day work of tilers and construction companies. Mineral and organic adhesives for a wide range of applications – all in one easy-to-navigate product range.
Practical, certified, safe
Practicality: a clear product range that is easy to choose from and simple to use.
Quality: high bond strength, durability and ease of application.
Safety: low VOC emissions and better indoor air quality – for both the installer and the people using the rooms.
In a world where sustainable building materials and eco-friendly practices are becoming increasingly important, Kerakoll is a pioneer in the industry.
Founded in 1968, the Italian company has become a global leader in the manufacture of adhesives, sealants, and other building materials, while remaining committed to protecting the environment.
+3670 400 2040
hello@masterworks.hu
Showroom
23 Radnóti Miklós Street
1137 Budapest
Route
Warehouse
GSP warehouse
1 Dávid Schwarz Street
2220 Vecsés
Route
© 2026, Masterworks Hungary
Green building. Interior design.