Kerakoll Pragma csemperagasztó felhordása fogazott glettvassal

Tile adhesive: which one for large tiles, old tiles or wood? Meet the new Kerakoll Pragma tile adhesive range

A large tile sounds hollow when you step on it. A terrace floor bulges after the first frost. Tiles laid on an old PVC floor come loose within weeks. This is rarely the tile's fault. Usually the adhesive did not suit the substrate or the load.

Pragma is Kerakoll's new tile adhesive range, now available at masterworks.hu. Five products, five clearly separate jobs. This guide explains what adhesive classifications mean, how to check the substrate, and which Pragma suits which job: Pragma Flex, Pragma Pro S1, Pragma Rapid, Pragma Duo and Pragma Ready. At the end we work out what the adhesive means in the price of the whole tiling job.

What is tile adhesive, and what does it do?

Tile adhesive bonds the tile to the substrate. A floor build-up, from the top down, usually looks like this: grout and tile, adhesive, waterproofing where needed, screed or old flooring, slab. On a wall the order is the same, with render or plasterboard as the substrate.

The adhesive does four jobs:

  • Holds: it keeps the tile on the substrate for years, under water, heat and frost.
  • Fills: it leaves no void under the tile. A tile with voids sounds hollow and cracks under load.
  • Levels: it evens out small irregularities. The Pragma powders work in a 2–15 mm bed.
  • Gives: a flexible adhesive follows the different movements of the substrate and the tile, for example on underfloor heating or in the sun.

How to read the classification

Every tile adhesive pack carries a code under EN 12004. It tells you what the product can do:

Letter or number Meaning
C, D, R Cementitious (C), dispersion, i.e. paste (D), reactive, i.e. two-component resin (R)
1, 2 Normal (1) or improved (2) adhesion
F Fast-setting
T The tile does not slip on a wall (0.5 mm at most)
E Extended open time: tiles can be laid into fresh adhesive for longer
S1 Deformable: the adhesive layer gives when the substrate or tile moves

An example: C2 TE S1 is a cementitious, improved-adhesion, non-slip, extended-open-time, deformable adhesive.

Mineral or organic adhesive?

A mineral adhesive is a cementitious powder. It is mixed with water, and cement setting gives it strength. It is the most common type, also outdoors and in wet areas.

An organic adhesive is resin-based. Pragma has two kinds. A reactive adhesive has two components that set chemically once mixed. A paste adhesive is used straight from the bucket without mixing, and sets as its water evaporates.

The hidden problem: the substrate decides

People choose adhesive by the tile. Yet most failures start in the substrate. Three questions decide:

  • Is it rigid and load-bearing? Cement screed, concrete and cement render are good bases. Wood, metal, PVC and linoleum move, and most of them do not absorb. A cementitious adhesive can come off them.
  • What absorbs, what does not? Gypsum and anhydrite do not go directly with a cementitious adhesive. They need a primer underneath if the adhesive's TDS says so.
  • Does the surface move? Large tiles, façades, large tiles on underfloor heating or a sunny terrace: thermal movement and deflection are greater here. A deformable (S1) adhesive is the safer choice. For standard-size tiles on underfloor heating and terraces, Pragma Flex is also suitable.

If this is skipped, the failure only shows later: hollow tiles, cracked grout, a lifting corner. The repair then starts with demolition. According to JóSzaki's 2026 prices, removing old tiling costs HUF 3,000/m² on average, and new grid-pattern tiling costs HUF 8,500/m² on average in labour (joszaki.hu). Add the new tiles and the wait: a February 2026 survey found an average wait of 60 days for a tiler (adozona.hu).

How to check the substrate

A few simple home tests. They are rough checks and do not replace a professional assessment.

  • Rub test: rub the surface hard with your palm. No dust or sand may stay on your hand. If it does, the substrate must be consolidated or primed.
  • Tapping on old tiles: hollow-sounding tiles must be removed before tiling over. Tiling over only works on firmly bonded old tiles.
  • Water-drop test: if a drop soaks in within minutes, the substrate is absorbent. According to the powders' TDSs, a very absorbent cement substrate should be pre-wetted or primed.
  • Foil test: tape a square metre of plastic foil to the substrate for 24 hours. If the surface underneath is damp or dark, the substrate is still wet. No Pragma goes on a wet substrate: every TDS asks for a dry one, and Duo and Ready for a fully dry one.

What does Pragma bring?

Pragma covers the five main everyday tiling jobs in one range: three mineral powders and two organic adhesives. According to Kerakoll's brochure, the aim is a clear range that is easy to choose from.

The shared points, always only where the product's own TDS states them:

  • All five have very low emissions for indoor air (EMICODE EC1 Plus). Flex, Pro S1, Rapid and Ready also carry the French A+ label.
  • All five are non-slip on walls (T under EN 12004).
  • The three powders, Flex, Pro S1 and Rapid, keep at least 1 N/mm² adhesion after heat ageing, water immersion and freeze-thaw cycles. All three can be used outdoors, on terraces and in pools.
  • According to Kerakoll's Pragma brochure, an Environmental Product Declaration (EPD) is available for the whole range. On the Hungarian site, the EPDs of Duo and Ready can currently be downloaded.

The times in the TDSs apply at +23 °C and 50% relative humidity. In the cold, everything takes longer.

Kerakoll's Pragma brochure in Hungarian can be downloaded here: Pragma brochure (PDF).

The five Pragma tile adhesives

Pragma Flex — the all-round choice

Kerakoll Pragma Flex mineral tile adhesive, 25 kg bag, white and grey

Pragma Flex is a high-performance mineral tile adhesive for porcelain stoneware, ceramic tiles and natural stone, classed C2 TE. For walls and floors, indoors and outdoors, on underfloor heating, terraces and in pools. It has the lowest cost per square metre in the range. Limit: it is not deformable (no S1), so for large tiles and moving surfaces Pro S1 is the safer choice. On old floor tiles, concrete, gypsum and anhydrite it may only be used after Active Prime Fix or Active Prime Grip.

  • Walkable and groutable: white ≈ 20 hours, grey ≈ 18 hours (+23 °C)
  • Consumption: ≈ 2.5–6 kg/m², 25 kg ≈ 4–10 m²
  • Where: bathroom, kitchen, hallway, terrace, balcony, pool
  • Who it suits: anyone who wants one reliable adhesive for most conventional tiling jobs

Pragma Pro S1 — for large tiles and tiling over tiles

Kerakoll Pragma Pro S1 deformable tile adhesive, 25 kg bag, white and grey

Pragma Pro S1 is a deformable mineral tile adhesive, classed C2 TE S1. Its transverse deformation is at least 2.5 mm, so the adhesive layer gives when the substrate or the tile moves. It is the safer choice for large tiles, façades and tiling over an existing floor. According to its TDS it bonds to existing floor tiles without a primer. On façades, the designer may specify mechanical fixing for tiles larger than 30 cm. Per bag it costs ≈ 13% more than Flex.

  • Walkable and groutable: after ≈ 24 hours (+23 °C)
  • Consumption: ≈ 2.5–6 kg/m², 25 kg ≈ 4–10 m²
  • Where: large-format floors, underfloor heating, tiling over tiles, façades, terraces, pools, saunas
  • Who it suits: anyone laying tiles over 60 cm or thin tiles, or tiling over old flooring

Pragma Rapid — for a fast handover

Kerakoll Pragma Rapid fast-setting tile adhesive, 25 kg bag, white and grey

Pragma Rapid is a fast-setting mineral tile adhesive, classed C2F TE. The F stands for fast setting: the floor is walkable and groutable after ≈ 3 hours, walls can be grouted after ≈ 2 hours. Its open time is still at least 30 minutes, so there is time to adjust. A pool can be filled after ≈ 7 days. It also bonds to existing floor tiles. Limit: it is the most expensive of the three powders and is not deformable. It only pays off when time really is money.

  • Walkable and groutable: after ≈ 3 hours (+23 °C)
  • Consumption: ≈ 2.5–6 kg/m², 25 kg ≈ 4–10 m²
  • Where: shops, offices, stairwells, urgent bathroom renovations, pools
  • Who it suits: anyone who wants to grout the same day or hand over the room the next day

Pragma Duo — for wood, metal and PVC

Kerakoll Pragma Duo two-component flexible tile adhesive, 8 kg bucket

Pragma Duo is a two-component, reactive organic tile adhesive, classed R2 T. The 8 kg monopack holds both parts pre-measured at a 7 : 1 ratio. It is highly flexible: after 7 days it breaks at ≈ 70% elongation. That is why it bonds to wood, metal, rubber, PVC and linoleum, after cleaning with Keragrip Eco Pulep. It suits XPS, EPS, cement-based waterproofing, and water-sensitive, staining-prone stone. Limit: it is by far the most expensive per square metre in the range, and it may only be applied on fully dry substrates and between +10 °C and +30 °C.

  • Walkable: after ≈ 24 hours (+23 °C)
  • Consumption: ≈ 1–4 kg/m², 8 kg ≈ 2–8 m²
  • Where: wooden or metal structures, old PVC floors, pools, terraces, saunas
  • Who it suits: anyone whose substrate will not hold a cementitious adhesive and who does not want to demolish

Pragma Ready — no mixing, for indoors

Kerakoll Pragma Ready ready-to-use paste tile adhesive, 17 kg bucket

Pragma Ready is a ready-to-use organic paste tile adhesive for indoor use, classed D2 TE. It needs no mixing with water; stirring it in the bucket is enough. It bonds to gypsum and anhydrite without a primer if the substrate is fully dry and single-layer. It also suits chipboard and plywood. Leftovers keep in the resealed bucket. Limit: indoors only, not for permanently wet rooms or pools. Not for non-absorbent substrates, such as old tiles, with low-absorption tiles. Per square metre it costs several times as much as Flex. It pays off where dust, mixing or priming is a problem.

  • Walkable: after ≈ 24 hours (+23 °C)
  • Consumption: ≈ 1.5–5 kg/m², 17 kg ≈ 3–11 m²
  • Where: bathroom and kitchen walls, plasterboard, gypsum plaster, occupied homes
  • Who it suits: smaller indoor jobs where the work must be clean and quick

The Pragma range in one table

Product Class
bed
Price, incl. VAT
Pragma Flex C2 TE
2–15 mm
HUF 13,950 (grey)
HUF 14,300 (white), 25 kg
Pragma Pro S1 C2 TE S1
2–15 mm
HUF 15,750 (grey)
HUF 16,150 (white), 25 kg
Pragma Rapid C2F TE
2–15 mm
HUF 22,550 (grey)
HUF 26,850 (white), 25 kg
Pragma Duo R2 T
2–15 mm
HUF 69,550 (white), 8 kg
Pragma Ready D2 TE
2–10 mm
HUF 68,300 (white), 17 kg

Prices are masterworks.hu gross prices at the time of writing (November 2026). Times and values apply at +23 °C and 50% relative humidity.

Which one for which substrate:

Substrate Pragma
Cement screed, cement render Flex, Pro S1, Rapid, Duo, Ready
Old floor tiles Pro S1, Rapid, Duo; Flex after priming
Gypsum, anhydrite Ready without primer; powders after priming
Wood, metal, PVC, linoleum Duo (after cleaning); indoors on chipboard and plywood, Ready too
Outdoors, pools Flex, Pro S1, Rapid, Duo

On concrete, Pro S1, Duo and Ready bond directly and Flex after priming; Rapid's TDS does not list concrete. Details are on the product pages.

More expensive? What does the whole job cost?

Looking at the adhesive price on its own is misleading. The adhesive is the smaller part of a tiling job's cost; the larger part is labour and the tiles. So the fair comparison is the cost of the whole job, in percentage terms.

According to JóSzaki's 2026 average, tiling labour costs HUF 8,500/m² (joszaki.hu). In our experience this is the low end of the market: careful, reliable tiling typically costs HUF 10,000–14,000/m².

As a benchmark we took a widely sold, store-bought C2TE S1 flexible adhesive in a 25 kg bag. In November 2026, web shop prices ranged from ≈ HUF 5,800 to 10,000: for example HUF 5,813 (bauanyag.hu) and HUF 9,999 (obi.hu). We do not know its exact consumption, so we assume the same rate.

First, the adhesive on its own, per square metre, using the midpoint of the consumption given in each TDS:

Product Assumed rate HUF/m² (grey or white)
Store-bought C2TE S1 ≈ 4.25 kg/m² ≈ 990–1,700
Pragma Flex ≈ 4.25 kg/m² ≈ 2,370 / 2,430
Pragma Pro S1 ≈ 4.25 kg/m² ≈ 2,680 / 2,750
Pragma Rapid ≈ 4.25 kg/m² ≈ 3,830 / 4,560
Pragma Duo ≈ 2.5 kg/m² ≈ 21,730
Pragma Ready ≈ 3.25 kg/m² ≈ 13,060

Actual consumption depends on tile size and the notched trowel (powders: ≈ 2.5–6 kg/m², Duo: ≈ 1–4 kg/m², Ready: ≈ 1.5–5 kg/m²).

As an adhesive, Pragma Pro S1 costs ≈ HUF 1,000–1,800 more per square metre than a store-bought S1. We do not hide this. The question is what that means for the whole job.

A 20 m² floor, whole-job cost

Example: a 20 m² floor. It needs 4 bags of adhesive (≈ 4.25 kg/m²). With Pragma Pro S1 that is HUF 63,000 (grey); with a store-bought S1, HUF 23,250–40,000. The difference is ≈ HUF 23,000–39,700. We count the tiles at an example HUF 10,000/m² and leave out the grout, which is the same either way.

Labour Whole job with Pro S1 Extra as % of the whole job
HUF 8,500/m² HUF 433,000 ≈ 5–9%
HUF 12,000/m² HUF 503,000 ≈ 5–8%
HUF 14,000/m² HUF 543,000 ≈ 4–7%

So the better adhesive is ≈ 4–9% of the price of the whole job done with Pro S1. The adhesive itself is ≈ 12–15% of the total cost in the example. With dearer tiles both shares are smaller. With large tiles consumption moves towards the top of the range, but the extra still stays at a few percent of the whole job.

In our experience, on most installation jobs, such as painting, plastering and coatings, materials are a quarter to a fifth of the total cost, and the rest, ≈ 75%, is labour. In tiling the tile price shifts this ratio, but the adhesive's share stays small. Saving on materials therefore saves little but carries a risk: weaker or wrongly chosen materials can fail sooner. If saving a few percent means redoing the job later, that is the most expensive option.

The bigger item is labour, and that is where the most room for manoeuvre is. But the lower the labour rate, the more it matters that the material is forgiving.

What do those few percent buy?

The store-bought adhesive is also C2TE S1, so on paper it is in the same class. But the classification only sets minimums: C2 at least 1 N/mm² adhesion, E at least 30 minutes open time, and S1 that the adhesive layer gives when the substrate or the tile moves. It says nothing about how the adhesive spreads or how far it performs above the minimum. According to the Pragma Pro S1 TDS:

  • Its tensile adhesion after 28 days is at least 2 N/mm², twice the C2 minimum. This is a reserve for when the bed or the substrate is not perfect.
  • It is easy to apply and has good workability.
  • Mixed adhesive stays usable for at least 3 hours.
  • It has very low emissions (EMICODE EC1 Plus, French A+).

For store-bought products, it is worth checking the same values on their data sheets. In our experience, an adhesive that spreads well fills the back of the tile better and is more forgiving: if a tile needs adjusting, it is easier. This matters more the lower the labour rate. Cheap labour with cheap materials gives the most defects; better materials partly make up for it. A skilled tiler can work with almost anything, yet still chooses the easy-to-handle adhesive, because it is faster to work with.

Why does Flex cost more if it is not S1?

Because S1 is not a quality ranking but a single property: on a rigid substrate, where the tiling does not move, it is not needed. Pragma Flex is easy to apply and has good workability, it works as both adhesive and leveller in a 2–15 mm bed, and mixed material stays usable for at least 3 hours. Over the whole job the difference is small here too: in the 20 m² example above, Flex costs ≈ 3–8% of the whole job more than a store-bought S1. If the job needs S1, Pragma Pro S1 costs only ≈ 13% more per bag than Flex: in that case, choose it.

Rapid, Duo and Ready: when do they pay off?

Duo and Ready are not substitutes for the powders. Per square metre, Duo costs ≈ 9 times and Ready ≈ 5.5 times as much as Flex. They pay off when a powder will not work or would need extra work.

Situation Material What it gains
20 m² shop floor:
Rapid vs Flex (grey)
HUF 90,200 vs
HUF 55,800
Walkable and groutable ≈ 15 hours sooner
10 m² gypsum-plastered wall:
Ready vs Flex + primer
HUF 136,600 vs
HUF 41,100
No powder mixing, dust or priming

The Flex + primer row includes 2 kg of Active Prime Fix (1 kg ≈ 5–10 m²). On plasterboard, Flex can be used without a primer. The table excludes grout, tiles and labour.

What is a day worth? Rapid's extra ≈ HUF 34,400 (counted in whole bags) pays off if a day's delay costs more than that. For example:

  • a day's revenue of a closed shop,
  • the tiler's extra trip to grout,
  • a day's rent or accommodation while the bathroom cannot be used,
  • the next trade's delay when everyone waits for the tiler.

When does a ready-to-use paste pay off? When a few tiles need re-fixing, or a smaller wall needs tiling in an occupied home. Mixing a powder takes water, a bucket, a mixer and a clean-up. With Pragma Ready, the bucket is opened, stirred, and work can start: the home does not turn into a building site. Leftovers keep in the resealed bucket. For large wall areas it is not the economical choice.

The cost of the risk

A repair always costs more than the adhesive. Removing and re-tiling 20 m² of floor is ≈ HUF 230,000 in labour at JóSzaki's averages, or ≈ HUF 300,000 at HUF 12,000/m² labour, plus new tiles and the wait. The difference between the store-bought and the Pragma adhesive (HUF 23,000–39,700) is ≈ 8–17% of that. The most common causes: an adhesive type that does not suit the substrate (for example a cementitious adhesive on wood, or a non-deformable adhesive under large tiles) and an incomplete bed, which makes the tile sound hollow. The right choice avoids the first; careful work and an adhesive that spreads well avoid the second.

In short

  • Conventional tiling on a rigid cement substrate → Pragma Flex → the lowest cost per square metre in the range.
  • Large tiles, old tiles, façades → Pragma Pro S1 → deformable, goes on old floor tiles without a primer.
  • Urgent handover → Pragma Rapid → walkable and groutable after ≈ 3 hours.
  • Wood, metal, PVC, linoleum, water-sensitive stone → Pragma Duo → reactive, highly flexible.
  • Small indoor job, gypsum, occupied home → Pragma Ready → no mixing, no primer on gypsum.

Which Pragma tile adhesive do you need?

  • New cement screed, bathroom or terrace, standard-size tiles: Pragma Flex.
  • Tiles over 60 cm or thin tiles, façades, large tiles on underfloor heating or a sunny terrace: Pragma Pro S1.
  • Old, firmly bonded tiles, without demolition: Pragma Pro S1; if urgent, Pragma Rapid.
  • The room must be in use tomorrow: Pragma Rapid.
  • Wooden or metal structure, old PVC or linoleum floor: Pragma Duo.
  • Stain-prone marble or stone: Pragma Duo.
  • Plasterboard, gypsum plaster, indoor wall, small quantity: Pragma Ready.

If the tests gave unclear results, it is worth asking before the tiles go down. The full range is under tile adhesives. Our guide to gel adhesives: Four adhesives, one system — the Kerakoll H40 tile adhesive line.

Frequently asked questions

How much tile adhesive is needed per square metre?
Pragma powders use ≈ 2.5–6 kg/m², depending on tile size and the notched trowel. Duo uses ≈ 1–4 kg/m², Ready ≈ 1.5–5 kg/m². Outdoors a full bed is needed, and large tiles often need back-buttering too, which puts consumption at the top of the range.

Can tiles be laid over old tiles without demolition?
Yes, if the old tiles are firmly bonded and do not sound hollow. Pragma Pro S1 and Pragma Rapid bond to existing floor tiles without a primer. Pragma Flex only after Active Prime Fix or Active Prime Grip.

Which tile adhesive is needed for large-format tiles?
Large tiles need a deformable, S1-classed adhesive; among the Pragmas, that is Pragma Pro S1. For tiles over 60 cm and thin tiles, full coverage may also require buttering the back of the tile.

Can tiles be bonded to wood or metal?
Yes, with a two-component reactive adhesive. Pragma Duo bonds to wood, metal, rubber, PVC and linoleum if the substrate is first cleaned with Keragrip Eco Pulep. Cementitious powders must not be used on them. Indoors, Pragma Ready also bonds to chipboard and plywood.

When can tiles be grouted after laying?
With the fast-setting Pragma Rapid, after ≈ 3 hours, on walls after ≈ 2 hours. With Pragma Flex after ≈ 20 hours (white) or ≈ 18 hours (grey), with Pragma Pro S1 after ≈ 24 hours. The times apply at +23 °C and are longer in the cold.

Which tile adhesive is needed for plasterboard or gypsum plaster?
All three Pragma powders and Ready suit plasterboard. On gypsum plaster and anhydrite, Pragma Ready bonds without a primer if the substrate is fully dry. The powders need Active Prime Fix or Active Prime Grip under gypsum.

Which tile adhesive can be used outdoors and in pools?
Pragma Flex, Pragma Pro S1, Pragma Rapid and Pragma Duo suit outdoor use and pools. Pragma Ready is for indoors only. In pools the grout must also resist water, for example an epoxy grout.

Can a ready-to-use paste tile adhesive be used for DIY?
Yes, Pragma Ready is applied straight from the bucket without mixing, so it is easy to handle for small indoor DIY jobs. Tiles must be pressed into fresh adhesive, and the adhesive must cover the whole back of the tile.

We help you choose

Not sure which Pragma suits your substrate? Send us the tile size, the substrate, and whether it is indoors or outdoors. We will tell you which adhesive and which primer you need. We also carry out the tiling: ask for a quote for materials and labour.

hello@masterworks.hu · +36 70 400 2040
Masterworks — official Kerakoll distributor in Hungary.

More news

Kerakoll Pragma csemperagasztó felhordása fogazott glettvassal
  • Nov 20, 2026
Tile adhesive: which one for large tiles, old tiles or wood? Meet the new Kerakoll Pragma tile adhesive range
A megújult Kerakoll Biocalce termékcsalád új csomagolásban: falazóhabarcsok, vakolatok és simítók zsákjai
  • Nov 18, 2026
Kerakoll Biocalce renewed: new packaging, new data sheets. Which product is for what?
Tölgy szalagparketta lerakása fogazott glettvassal felhordott parkettaragasztóba, cementesztrichen
  • Nov 17, 2026
Parquet adhesive: which one keeps the floor from sounding hollow? The eight Kerakoll parquet adhesives compared
We have the right solution for every construction-related problem.
Alapfelületek előkészítése
Preparation of base surfaces
Dekorálás: festékek, bevonatok és lakkok
Paints
Nedvességkezelés
Moisture Treatment
Hőszigetelés
Thermal insulation
Szerkezeti javítás és megerősítés
Structural repair and reinforcement
Kerámia és terméskő burkolás
Ceramic and natural stone tiling
Parketta bevonatok
Parquet Coatings
Vízszigetelés
Waterproofing
Természetes rendszerek
Natural systems
Építés és felületkialakítás
Construction and surface design

Kerakoll Design

Kerakoll Design is an integrated project featuring innovative materials—resin, cement, handcrafted wood, microcoatings, paints and glazes—all coordinated within a single colour palette.